
Antenna installation schematic
◆1.Install the 45° adapter ratchet
on the 45° adapter head, fix the 45°
adapter direction (straight ahead),
and rotate the 45° adapter ratchet
to fix.
◆2.Install the ratchet wheel of
the 45° adapter on the feeder
joint below the antenna ,Set the
feeder interface, make the antenna
vertically downward, rotate the
ratchet of the adapter 45° to fix.
◆3.Fix the connector on the
antenna to the 45° adapter on
the top of the glasses. (The TNT
pattern is installed inside the
45° adapter)
◆4.When installing the antenna, keep the
direction of the antenna in the same
direction (forward). When wearing the
glasses, the antenna faces the aircraft.
(Users who tend to bow their heads, the
antenna is slightly raised)