Mapmyindia ICENAV 501 User manual

DVD/VCD/CD/MP3/MPEG4/SD/USB PLAYER WITH FM/AM TUNER
GPS & BLUETOOTH
ICENAV 501
Operating Instructions

1 2
Safety Precautions
Never expose this unit, amplifier,
and speakers to moisture or water to
prevent electric sparks or re.
Please don't change the fuse on
the power cord without professional
guidance, using improper fuse may
cause damage to this unit or even cause
re.
Please contact your nearest dealer
if one of the following symptoms is
experienced:
(a). Water or other objects enters the
unit.
(b). There is smoke.
(c). Peculiar smell.
Only connect the unit to a 12-volt power
supply with negative grounding.
MUTE
OK
MUTE
OK
Never install this unit where the
operation & condition for safe driving is
impaired.
Never use the video display function
in the front when driving to prevent the
violation of laws & regulations and also
to reduce the risk of traffic accident
except for using rear view video
camera.
MUTE
OK
MUTE
OK
MUTE
OK
MUTE
OK
Thank you for purchasing this product.
Please read through these operating
instructions so you will know how to
operate your model properly. After
you’ve nished reading the instructions,
keep this manual in a safe place for
future reference.
To ensure safe driving, please adjust
the volume to a safe and comfortable
level in case of emergency situations.
1. Never disassemble or adjust the unit without any professional guidance.
For details, please consult any professional car shop / dealer for inquiry.
2. If the front panel or TFT monitor is dirty, please use a clean silicone cloth and neutral detergent
to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning
may result in scratching or decoloration to the monitor.
3. If any abnormal behavior of the unit is found, please refer to trouble shooting guide of this
manual. If no relevant information is found, please press the [RESET] button on the front panel
to resume factory default.
4. If you have parked the car in hot or cold weather for a long time, please wait until the
temperature in the car becomes normal before operating the unit.
5. Using the car heater in low temperature environment may result in moisture inside the unit, DO
NOT use the unit in this situation. Eject the disc and wipe off the moisture on the disc. If the unit
still doesn't work after a few hours, please contact the service center.
6. Do not impact the LCD monitor which could cause damage.
7. To prevent damage to the screen, avoid touching it with sharp objects.
8. To provide a clear demonstration and an alternative for easy understanding to the operation of
this unit, graphic illustrations are used.
However, some illustrations are different from the actual images displayed on the screen.
9. Operate the unit correctly according to this manual to prevent unnecessary problem. The
guarantee won't be valid if the problem is caused by inappropriate operation.
Safety Precautions
MAP
Note:The items listed outside of the frame are the commercial products generally sold.
Expanding Systems

3 4
Contents
Safety Precautions ...................................1
Before Using .............................................4
Front Panel .............................................4
Remote Control.......................................5
Notes on Remote Control Usage ............6
Uninstall Battery......................................6
Install Battery ..........................................6
Basic Operations......................................7
Parking Brake Inhibit...............................7
Mute ........................................................7
Power On / Off ........................................7
Audible Beep Conrmation .....................7
Playing Source Selection ........................7
Volume Adjustment.................................7
EQ Menu.................................................7
Select Preset Equalizer ..........................8
Adjust EQ Parameters ............................8
Adjust Fader/Balance .............................8
Set Date /Time ........................................9
Radio Mode .............................................10
Tuner TFT Display ................................10
Select Radio as Playing Source ...........10
Select One Radio Band ........................10
Tune......................................................10
Playback Mode........................................11
Load a Disc ...........................................11
Eject a Disc ...........................................11
Touch Screen Controls .........................11
Preset Station .......................................11
Local Seeking .......................................11
EQ Selection .........................................11
Controlling Playback .............................12
Connect a USB Device .........................12
Remove a USB Device .........................12
Insert/Remove a SD Card.....................12
Play/Pause............................................12
Previous/Next .......................................12
Search for a Folder ...............................12
Repeat ..................................................13
Repeat A-B ...........................................13
Shufe (Random) Play..........................13
Select Audio Mode................................13
Select Subtitle Language ......................13
Change View Angle ..............................13
Video Setup ..........................................14
Playback Information ............................14
Direct Track Entry .................................14
Rotate Pictures .....................................14
Zoom.....................................................14
Bluetooth Mode ......................................15
Pair the Bluetooth-enabled Devices .....15
Disconnect Bluetooth Device ................15
Make a Call ...........................................15
Answer an Incoming Call ......................15
Adjust Bluetooth Settings......................16
Settings ...................................................17
Display System .....................................17
Adjust General Settings ........................17
Calibration.............................................17
Adjust Time Settings .............................17
Adjust Sound Settings ..........................18
Adjust Video Settings............................18
Adjust Disc Rating ................................18
Adjust Volume Settings.........................19
Adjust Reset Settings ...........................19
Other Modes............................................20
Listen to Other Devices ........................20
Reset ....................................................20
GPS ......................................................20
Specications .........................................21
Troubleshooting .....................................23
Installation...............................................24
Wire Connections...................................25
Front Panel
Before Using
MAP
7 8
9
10
11
Note:
The graphic in this manual is for reference only, and
may be different from that in real unit. Reference to
real unit is suggested.
1. [ ] Button: Eject disc
2. [MENU/ ] Button:
Press to switch between the main
menu and current source.
Press and hold to enter brightness
adjustment mode, then rotate the
knob to adjust.
3. [NAVI] Button:
Press to switch to navigation mode.
4. Internal Microphone
Internal microphone for Bluetooth calls.
5. [ VOL / / MUTE] knob:
Press to turn the unit on. Press and
hold again to turn the unit off.
Press to silence the audio volume.
Turn clockwise to increase the
volume, and turn counter-clockwise
to decrease the volume.
Rotate the knob adjust the screen
brightness (press the [MENU/ ]
button)
6. Reset Button
Press to reset system settings to factory
default (except password and parental
lock settings).
7. SD/SDHC card slot
Insert an SD card for playback of music/
video/picture les.
8. USB Connector
Connect a USB device for playback of
music/video/picture les.
9. A/V Input
Accepts a 3.5mm jack through which
signals from various audio/video devices
can be applied to
the unit.
10. Map Slot
The Mini SD card is used for the
Navigation Map only, not for music
or other files. This may be used for
rmware updates if required.
11. Disc slot

5 6
Before Using
Remote Control
1. Change Current Source.
2. Eject the disc.
3. Enter the DVD menu.
4. Enter the DVD Title.
5. Zoom in /out on an image.
6. Select radio band.
7. EQ setting
8. Dimmer adjustment
9.
[ ]- Fast Reverse
[ ]- Fast Forward
10.Dial/Receive call
11.
Conrm
12.
[ ]-Play Photo:UP-DOWN Mirror;
Play Disc:Select Files.
[ ]-Play Photo:Left-Right Mirror;
Play Disc:Select Files.
[ ]-Return To Play List
[ ]-Play Photo:Clockwise Rotation ;
Play Disc:Select Files.
13.Stop/Return
14.Digit area
15.
Return to Main Menu
16.Power on/off
17.
Playback disc in different angle for a scene
18.
DVD Subtitle
19.Setup to repeat playback from time frame A
to time frame B.
20.Repeat playback of current chapter.
21.Slow playback
22.Play all chapter in random order.
23.- Radio tune
[ ]- Previous
[ ]- Next
24.Hang up
25. Increase/Decrease volume.
26.Pause playback/Start playback.
27.Toggle on/off audio output.
28.
Audio Channel Select.
EJECT
Notes on Remote Control Usage
1. Aim the remote control at the remote sensor on the unit.
2. Replace the battery from the remote control or insert a battery insulator if the battery has not
been used for a month or longer.
3. DO NOT store the remote control in direct sunlight or in high temperature environment, or it
may not function properly.
4. The battery can work for 6 months under normal condition. If the remote control won’t work,
please change the battery.
5. Use“button shaped” lithium battery“CR2025”(3V) only.
6. DO NOT recharge, disassemble, heat or expose the battery in fire.
7. Insert the battery in proper direction according to the ( + ) and ( - ) poles.
8. Store the battery in a place where children cannot reach to avoid the risk of accident.
Uninstall Battery
Slide out the battery compartment tray
at the bottom on the back of the remote
control.
Install Battery
Use button-shaped lithium battery
CR2025 (3V)” only. Insert the battery
to the battery tray with proper direction
according to the (+) and (-) poles.
Before Using
PULL OUTPUSH IN

7 8
Parking Brake Inhibit
• When the “BRAKE” cable is connected to
the brake switch, the display on the TFT
monitor will display video only when the
vehicle is applied.
• Parking brake function is overridden when
the video source is set to REVERSE.
• When the parking brake inhibit is active,
the front monitor displays “WARNING Do
not watch wideo while driving!”, preventing
the driver from watching content while
driving. Rear video screens are not
affected.
Mute
Press [ VOL / / MUTE ] knob or the [
MUTE ] button on remote control to mute
the volume from the unit. Press again to
restore the volume. [ ] is displayed on
the LCD. Adjusting the volume or using any
of the audio setup features cancels the mute
function.
Power On / Off
Press the [ VOL / / MUTE ]knob on the
unit (or the [ POWER ] button on the remote
control) to turn the unit on. The current mode
status appears in the LCD.
Press and hold the [ VOL / / MUTE ]
knob to power off the unit.
Audible Beep Conrmation
An audible beep tone conrms each function
selection. The Beep tone can be disabled
through the Setup menu.
Basic Operations
Playing Source Selection
Press the [ MENU] button on the front panel
or the [ SRC ] button on the remote to
change between available playing sources.
The playing mode is displayed on the screen.
4
3
2 1
3 5 3
1. Date and Time display. Double click to
switch to Clock mode.
2. Function icons
3. 1/2 or 2/2: Touch this page button to view
the first or second page of on-screen
buttons. You also can drag left or right on
the blank area to switch the pages.
4. Touch repeatedly to change wall papers.
5. Touch for quick access to Equalizer level
settings.
Volume Adjustment
To increase or decrease the volume level,
turn the [ VOL / / MUTE ] knob on the
front panel or press the [ VOL+ ] / [ VOL ]
button on the remote control. The volume
ranges from “0”to “39”. The LCD or TFT
screen displays the volume level for 3
seconds.
EQ Menu
The Audio Control feature allows you to
easily adjust your audio system to meet the
acoustical characteristics of your vehicle,
which vary depending on the type of vehicle
and its measurements. Proper setting of the
Fader and Balance boosts the effects of the
cabin equalizer.
Basic Operations
Select Preset Equalizer
1. Enter the EQ setup mode
Touch the [ ] icon in the user interface
and the EQ setup interface will display on
the screen.
2. Select EQ mode
∙ [User] ∙ [Rock]
∙ [Flat] ∙ [Class]
∙ [Pop] ∙ [Jazz]
∙ [Techno] ∙ [Optimal]
Adjust EQ Parameters
To adjust EQ parameters, touch and drag the
parameters adjustment bar.
Touch [ ] / [ ] or drag [ ] to adjust the
parameters.
[ User ]: Set the desired audio effect.
∙ [BAS] bass range: -7 to +7
∙ [MID] middle range: -7 to +7
∙ [TRE] treble range: -7 to +7
∙ [LPH] low pass filter range: 60, 80, 100,
200
∙ [MPF] middle pass filter range: 0.5K, 1K,
1.5K, 2.5K
∙ [HPF] high pass filter rang: 10K, 12.5K,
15K, 17.5K
[ LOUD: On/Off ]: When listening to music
at low volumes, this featurewill selectively
boost certain bass and treble frequencies.
[ RESET ]: Cancel the equalizer function
settings.
Adjust Fader/Balance
You can adjust front/back/left/right balance
of the speaker and the subwoofer volume to
get balanced listening effect according to the
surroundings and your interest.
1. Enter the EQ setup mode
Touch the [ ] icon in the user interface
and the EQ setup interface will display on
the screen.
2. Adjust subwoofer volume
Touch [ ] / [ ] or drag [ ] to adjust
subwoofer volume from 0 to38.
3. Adjust fader / balance value
Touch [ ] / [ ] / [ ] / [ ] to adjust
fader / balance value
∙ [ ]: Front speaker, fader range: 0 to 7.
∙ [ ]: Rear speaker, fader range: 0 to 7.
∙ [ ]: Left speaker, balance range: 0 to 7.
∙ [ ]: Right speaker, balance range: 0
to 7.
Note:
1. The parameters of the EQ modes has
been preset and you can not change them
besides ‘User’.
2. The EQ mode will change to ‘User’
automatically when you adjust the
frequency value under the modes besides
‘User’.
3. The value of Sub is independent of EQ
mode and can be adjusted separately.

9 10
Basic Operations
Set Date /Time
1. Touch [ ].
2. Touch [ Time ].
The date/time setup menu is displayed.
· Set Date
1. Touch [ Date ].
2. Touch the date information on the screen .
A submenu is displayed.
3. Touch [ ] or [ ] to set year, month and
day.
· Set Time Mode
1. Touch [Time Mmode].
2. Touch [12H] or [24H] to switch clock
mode.
· Set Time
1. Touch [ Time ].
2. Touch the time on the screen, a submenu
is displayed.
3. Touch [ ] or [ ] to set hour and
minute.
· Set Desk Timer
1. Touch [ Desk Timer ].
2. Touch [ Simulate Timer ] or [ Numeral
Timer ] .
· Set Time Zone
1. Touch [Time Zone].
2. A submenu will be displayed.
3. Touch to select the time zone you desire.
4. The time zone of the device default setting
is “ GMT +4:30“.
· Set Power Off Timer
1. Touch [ Power Off Timer ].
2. Touch [ On ] or [ Off ] to select whether
timer displays after power off.
Radio Mode
Select Radio as Playing Source
Open the Source Menu and then touch
[Radio].
Select One Radio Band
Press the [BAND] button on remote control
or touch the [ ] icon on the user interface
to select one radio band among FM1, FM2,
FM3, AM1 and AM2.
Tune
Auto Tuning
Press the [ ] / [ ] button on the remote
control briey or hold [ ] / [ ] icon on the
user interface more than 1 second to seek a
higher / lower station.
To stop searching, repeat the operation
above or press other keys having radio
functions.
Note:
When a station is received, searching stops
and the station is played.
Manual Tuning
Method 1:
During manual tuning, the frequency will be
changed in steps.
Press the [ ] or [ ] button on remote
control or touch the [ ] / [ ] icon on the
user interface to tune in a higher / lower
station.
Method 2:
1. Touch the numeric keypad icon [ ].
Numeric keyboard is displayed, touch
number to input frequency.
2. Touch [ ] to delete the input number
step by step.
3. Touch [ OK ] to enter.
Tuner TFT Display
7
1
5
6
8
2
9
3 4
10
11
13 14 1512
1. Touch to view the SOURCE MENU and
select a new playback source
2. Distant signal broadcasting indicator
3. Current radio band indicator
4. Clock
5. Broadcaster information stored at the
preset
6. Touch to view more on-screen buttons
7. Touch to seek backward
8. Scan preset stations
9. Touch to seek forward
10. Touch to change between AM/FM bands
11. Current radio information
12. Current band preset radio stations
13. Touch to change between Local and
Distance
14. Enter frequency directly
15. Touch for quick access to Equalizer
level settings

11 12
Radio Mode
Preset Station
The unit has 5 bands, such as FM1, FM2,
FM3, AM1, AM2, and each band can store 6
stations; hence the unit can store 30 stations
in total.
Intro/Scan
Press the [ ] icon to intro. Each stored
station will play for 5 seconds automatically.
Hold down the [ ] icon to scan. Only
stations with sufficient signal strength will
be detected and stored in the memory. After
scaning, P1 will play automatically.
Manual Store
1. Tune to a station.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ].
4. Touch one of the channels P1 to P6 to
save the select band.
Tune to a Preset Station
1. Touch [Radio].
2. Select a band (if needed).
3. Touch one of the preset channels (P1 to
P6) on the screen.
Local Seeking
Touch the [ ] icon and choose the Radio
Local or Distance.
When the [ ] icon turns bright, only
stations with sufcient signal strength will be
detected.
EQ Selection
Press the [ ] icon and enter the EQ setup.
Playback Mode
Load a Disc
You can play video, audio or images stored
on the following discs:
• DVD Video, DVD-R, DVD-RW
• VCD
• Audio CD, CD-R, CD-RW
Note:
Ensure that the disc contains playable
content.
Eject a Disc
Press the [ ] button on the front panel
or remote control to eject the disc. When
the disc is ejected, the unit switches to the
previous source.
Touch Screen Controls
The touch key areas for DVD playback are
outlined below:
B
C
A
A: Return to the main menu
B: Play the video and display playback
information
C: Display onscreen control menu
D: Time display
Playback Mode
Controlling Playback
To access the on-screen controls, touch the
screen except upper left corner, and touch
again to cancel display. Touch [ ] to view
all function icons.
Connect a USB Device
1. Open the USB cover.
2. Insert the USB device into the USB slot.
Play starts automatically.
Remove a USB Device
1. Select other source on the main menu.
2. Remove the USB device.
Insert/Remove a SD Card
• Insert
1. Open SD card cover.
2. Insert the SD card into the SD card slot.
Play starts automatically.
• Remove
1. Select other source on the main menu.
2. Press the card unit you hear a click sound.
3. Remove the SD card.
Play/Pause
1. Once a disc, USB is inserted, play starts
automatically.
For DVD movie, if a menu appears, press
[ ] to start play.
2. To pause, touch [ ].
To resume play, touch [ ].
3. Skip to previous / next track / chapter,
press [ ] / [ ] icon.
Previous/Next
Touch [ ] / [ ] icon on the screen to skip
to previous / next track / chapter.
Search for a Folder
For Video Files
1. Touch [ ] to display all available video
folders.
2. Touch a folder,then touch the desired le.
3. Touch the le again to start play.
For Audio Files
1. Touch [ ] to display all available audio
folders.
2. Touch a folder,then touch the desired le.
3. Touch the le again to start play.

13 14
Playback Mode
For Picture Files
1. Touch [ ] to display all available
picture folders
2. Touch a folder,then touch the desired le.
3. Touch the le again to start play.
Repeat
For DVD/VCD movie disc:
1. Touch bottom half of the screen to display
menu on the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to select:
DVD
[ ] Repeat chapter: Play the current
chapter repeatedly.
[ ] Repeat title: Play all chapters in the
title repeatedly.
[ ] Repeat off: Play all in the all
repeatedly.
Repeat off: Cancel repeat play.
VCD
[ 1 ] Repeat single: Play the current
single repeatedly.
[ ] Repeat all: Play all in the all
repeatedly.
Repeat off: Cancel repeat play.
For CD/MP3/WMA les:
1. Touch anywhere except the upper left
corner to display menu on the screen, if
necessary.
2. Touch [ ] repeatedly:
[ 1 ] Repeat single: Play the current
single repeatedly.
[ ] Repeat all: Play all in the all
repeatedly.
[ ] Repeat folder: Play all in the current
folder.
[ ] Repeat off: Cancel repeat play.
Repeat A-B
You can repeat a specic of video le (repeat
A-B).
1. Touch the screen to display control menu,
if necessary.
2. Touch [ ] to display the 2nd menu, if
necessary.
3. Touch [ A-B ] repeatedly to mark:
Repeat A-: the start of the section to
repeat.
Repeat A-B: the end of the section to
repeat.
The selected section plays repeatedly.
4. To exit A-B repeat mode, touch A-B
repeatedly, [Repeat A-B off] is displayed.
Shufe (Random) Play
You can play audio tracks/files in random
order.
1. Touch the screen to display control menu,
if necessary.
2. Touch [ ] to display the 2nd menu, if
necessary.
3. Touch [ ] on the screen remote control
repeatedly to turn random play on or off.
Select Audio Mode
When you play VCDs, you can select an
audio mode (R/L/Stereo).
1. During play, touch bottom half of the
screen to display menu on the screen, if
necessary.
2. Touch [ ] to display the 2nd menu.
Touch [ ] repeatedly until the audio
mode is selected.
Select Subtitle Language
For DVD or Divx discs that contain two or
more subtitle languages.
1. During play, touch the screen to display
menu on the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to select a
language.
The selected language is displayed.
Change View Angle
Some DVDs contain alternate scenes, such
as scenes recorded from different camera
angles.
For these DVD disc, you can select from the
available alternate scenes.
Press [ Angle ] repeatedly on the remote
control.
The view angle is changed.
Playback Mode
Video Setup
Touch [ ] to access video setup mode,
touch [ ] or [ ] to set the desired
effect.
You may set the brightness, contrast, and
saturation of the video output from 0 to 16.
Playback Information
Touch the screen when playing back DVD
and VCD discs and the playback information
will be displayed on the top area of the TFT.
For DVD
1. Disc type.
2. DVD Title information. “1/8” indicates that
this DVD has 8 titles and the title playing
back now is the first title.
3. DVD Chapter information. “5/12” indicates
that current title has 12 chapters and
the chapter playing back now is the fifth
chapter.
12 3
DVD TTL:1/8 CHP:5/12
For VCD
1. Disc type.
2. VCD Track information. “1/8” indicates
that this VCD has 8 tracks and the track
playing back now is the first title.
12
VCD 1/8
Elapsed Time
1. Elapsed time of the current track.
2. Total time of the current track.
12
00:01:20 00:30:17
Direct Track Entry
To select a track directly, touch the [ ]
icon on screen control to displaythe direct
entry menu. Enter the desired track using the
on-screen number pad. Press [ OK ] to the
selected track.
Rotate Pictures
1. When you view pictures, touch the
screen to display menu on the screen, if
necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to rotate the
picture.
Zoom
You can zoom in pictures for a close view.
1. When you view pictures, touch the
screen to display menu on the screen, if
necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to zoom in or out
the picture.

15 16
You can make or receive phone calls with
Bluetooth-enabled phones through the
unit. You can also listen to music from a
Bluetooth-enabled device.
Pair the Bluetooth-enabled Devices
To connect your Bluetooth device to the
unit, you need to pair the device to the unit.
Pairing needs only to be done once. You can
pair up to ve devices. You also can search
for Bluetooth devices by mobile phone.
1. Turn on the Bluetooth function on the
device.
2. Touch [ + ] to search for Bluetooth device
with the device.
3. Select the Bluetooth device ID in the
pairing list.
4. Touch [ Link ].
5. Enter default password “0000”.
Note:
• The operational range between this unit
and a Bluetooth device is approximately 5
meters .
• Before you connect a Bluetooth device
to this unit, familiarize yourself with the
Bluetooth capabilities of the device.
• Compatibility with all Bluetooth device is
not guaranteed.
• Any obstacle between this unit and
a Bluetooth device can reduce the
operational range.
• Keep this unit away from any other
electronic device that may cause
interference.
Bluetooth Mode
Disconnect Bluetooth Device
To disconnect one device, touch [ ] .
Note:
• The device will also be disconnected
when the device is moved beyond the
operational range.
• If you want to reconnect the device to the
unit, place it within the operational range.
• If you do not want to reconnect the device
to the unit automatically, touch [ ], then
set [ Auto Connect ] to [ Off ].
For details, see the “Adjust Bluetooth
Settings” section.
Make a Call
1. Select Bluetooth function in the home
menu.
2. Pair the phone with the unit.
3. Search for phone number from the
following list:
[ ]: Phone Book
[ ]: Call Log
[Missed calls]
[Received calls]
[Dialed calls]
Or touch the number pad directly.
Answer an Incoming Call
By default, all incoming calls are received
automaticaly.
1. If there is an incoming call, the screen will
appear “Incoming”.
Bluetooth Mode
2. You may touch the screen to select [ Hang
up ] or [ Answer ].
Speak into the Bluetooth microphone.
∙ [ ]: Touch to mute the microphone
audio from the unit.
Touch the icon again to restore the
microphone audio from the unit.
∙ [ ]: Touch to access the direct dial
screen.
∙ [ ]: Touch to transfer a call back to the
mobile phone.
Note:You can select to receive calls
manually by set [Auto Answer] to [ Off ]
status.
Adjust Bluetooth Settings
1. In Bluetooth menu,touch [ ].
The option menu is displayed.
2. Touch on the selected option to change
the setting.
∙ [BT]: To turn on or off “Bluetooth” function.
∙ [Auto Connect]: To turn on or off “Auto
connect” function.
∙ [Auto Answer]: To turn on or off “Auto
answer” function.
∙ [Pair Password]: To set paring code.
∙ [Phone Book]: To synchronize phone
book, touch [ Download ] on the sub-menu
popped out.
Phonebook sync may take several minutes
to load on initial setup.
Music Mode
A2DP
A2DP is short for Advanced Audio
Distribution Profile. The mobile phones
supporting this function can transmit stereo
audio, whereas the ones not supporting this
function can transmit mono audio only.
AVRCP
AVRCP is short for Audio/Video Remote
Control Profile. The mobile phones
supporting this function can control the
playback of a Bluetooth audio player.
In the mode of the music player working,
if you want to make a phone call, you can
press the number keys on the mobile phone.
At the same time the music player will stop.
The TFT screen will display “Calling”, after
the call received, the voice will be transferred
to the unit. When the call ends, the screen
will display music playing menu.
If there is an incoming phone call, the music
player will stop, and the screen will display
“Incoming Call”. When the call ends, the
screen display music playing menu.

17 18
Display System
1. Touch the upper left corner to display main menu.
2. Touch [ Settings ].
The settings menu is displayed.
3. Touch the upper left corner of the screen to exit.
Adjust General Settings
1. Touch [ General ], if necessary.
2. Touch to select a setting.
3. Touch on the option to display/select an option.
General settings Options Description
Language Select on-screen display language.
Radio Area
Europe
Select one that matches your location.
America
America4
East Europe
Australia
China
Beep On Turn on the beep sound. Each time you press a button,
the unit beeps.
Off Turn off the beep sound.
Calibration Yes Calibrate the touch screen.
Wallpaper Ok You can select a wall paper.
Gps path setup.
Key Color Adjust You can select the color of the key.
Mic Setup Internal Internal microphone for Bluetooth calls.
External External microphone for Bluetooth calls.
Calibration
When the touch operation is not sensitive or valid, you should
calibrate the touch screen through calibration setting function.
Adjust the response positions of the touch panel as followings:
1. Press the [ Calibration ] option on the setup menu to enter.
2. Touch [ Start ] to enter.
3. Press and hold the center of [ + ] for 2 seconds, the [ +] will
move automatically.
4. Aim at center of [ + ], follow the path as shown of the gure, after
steps from 1 to 5, the system will exit calibrating automatically.
Adjust Time Settings
1. Touch [ Time ].
2. Touch an option repeatedly to select.
Time settings Options Description
Date Year/
Month/Day Touch [ ] or [ ] to set year, month and day.
Time Mode 12H/24H Touch [12H] or [24H] to switch time mode.
Time Touch [ ] or [ ] to set hour and minute.
Desk Timer Touch to select [ Simulate Timer] or [ Numeral Timer ].
Time Zone Touch to select the time zone you desire.
Power Off Time On/Off Touch to select whether the time displays after power off.
Settings
Adjust Sound Settings
1. Touch [Sound].
2. Touch an option repeatedly to select.
Sound settings Options Description
Sub Woofer Filter
Flat
Touch to select a crossover frequency.
80Hz
120Hz
160Hz
Loud On/Off When listening to music at low volumes, this feature will selectively boost certain
bass and treble frequencies.
Reverse Mute On/Off Turn on/off the reverse sound.
Adjust Video Settings
1. Touch [Video].
2. Touch an option repeatedly to select.
Video settings Options Description
Backview Mirror Mirror When you drive in reverse, the rear view is displayed in mirror.
Normal When you drive in reverse, the rear view displayed in normally.
Brightness Setup
Night
Touch to select the desired brightness setting.
Dark
Normal
Brightness
Parking On / Off Enable video / disable video.
When in Park “On” mode, the screen will display “WARNING” [if you play the video disc]. The
above warning screen will prevent the driver watching images.
Adjust Disc Rating
1. Touch [Disc].
2. Touch an option repeatedly to select.
DVD rating Options Description
Set password Set password to restrict the play of discs. The default password is 0000.
Rating level
Kid safe Acceptable for children.
G Acceptable for general viewers.
PG Parental guidance suggested.
PG-13 Unsuitable for children under age 13.
PG-R Recommend parents to restrict children under 17 to view.
R Restricted recommend parents to guide children under 17 to view.
NC-17 Unsuitable for children under age 17.
Adult Acceptable for adults only.
DVD Audio Select DVD audio language. Options available depend on DVD disc.
DVD Subtitle Select DVD subtitle language. Options available depend on DVD disc.
DVD Menu Select DVD menu language. Options available depend on DVD disc.
Aspect Ratio Touch to select display ratio: [ 4:3 PS ], [ 4:3 LB ], or [16:9 ].
Settings

19 20
Adjust Volume Settings
You can set different volume for different modes.
1. Touch [Volume].
The volume setting sub-menu is displayed.
2. Touch on a source.
∙ [Media]
∙ [Radio]
∙ [Bluetooth]
∙ [AV-IN1]
∙ [AV-IN2]
3. Touch [ ] or [ ] to assign value: 0 to 12.
When switching to the source, the volume increases automatically.
Adjust Reset Settings
1. Touch [Reset].
2. Touch an option repeatedly to select.
Language settings Description
Reset Factory
Touch to restore to default settings.
Reset Volume
Reset Video
Settings
Listen to Other Devices
You can connect an external audio/video
device to the unit.
1. Connect the external device with the
supplied AV cable.
2. Touch the upper left corner to display the
main menu.
3. Touch [AV-IN 2] = Rear input
[AV-IN 1] = Rear input
Reset
When the unit hangs up, you can reset it.
Press [ RESET ] with a ball-point pen or
similar tool.
Reset
Note:
When the unit has been reset, all the settings
will return to default settings.
GPS
1. Touch the upper left corner to display
home menu.
2. Touch [Navi], the navigation menu will
display.
3. Refer to the map manual to operate the
navigation tool.
For the GPS system is independent and
complicated, for more details, please refer
to “Navigation manual” (Not included in
this manual) .
Other Modes
Steering Wheel Control
Programming
1. Touch the upper left corner to display
home menu.
2. Touch [ SWC ], the SWC menu will display.
3. Press each individual steering wheel
control button for each corresponding
function.
4. Once the final steering wheel control
button is programmed, the functions are
saved and the programming will end.
5. Touch [ Reset ] to reset the programming.

21 22
General
Reference Supply Voltage .................................................................... 12V(DC)
Operating Voltage Range ........................................................10.5 - 15.8V(DC)
Max Operating Current .................................................................................15A
Maximum Output Power ........................................................ 45W x 4 channels
RMS Power Output ............................................................... 25W x 4 channels
Grounding System .................................................... Car Battery Negative Pole
Dimensions(WXHXD) .................................................178.0x101.5x174.6mm
Weight(main unit) ................................................................................... 1.82kg
FM
Signal Noise Ratio ................................................................................ ≥55dB
Residual Noise Sensitivity (S/N=30dB) ............................................... 18dBμV
Frequency Response (±3dB) ...................................................20Hz~12.5KHz
Station Seeking Level .................................................................... 20~28dBμV
Distortion .............................................................................................. ≤1.0%
Stereo Separation (1KHz) .................................................................... ≥25dB
Antenna Impedance ...................................................................................75Ω
AM
Residual Noise Sensitivity (S/N=20dB) ............................................... 30dBμV
Selectivity (±9KHz) ............................................................................... ≥50dB
LCD
Screen size .......................................................................................6.2 inches
Display resolution ........................................................................800X480dots
Contrast ratio .............................................................................................4002
DVD Player
Signal / Noise Ratio ..................................................................................80dB
Dynamic Range ........................................................................................80dB
Distortion (line out) ............................................................................... ≤0.1%
Frequency Response (±3dB) ......................................................20Hz~20KHz
Load Impedance ...........................................................................................4Ω
AUX IN
Distortion .............................................................................................. ≤0.5%
Frequency Response (±3dB) ......................................................20Hz~20KHz
Audio Input Level .................................................................................0.5Vrms
Audio
Audio Output Impedance ..........................................................................100Ω
Audio Output Level ....................................................................... 1Vrms(Max)
Video
Normal Video Input Level (CVBS) ......................................................1.0±0.2V
Video Input Impedance...............................................................................75Ω
Video Output Impedance ............................................................................75Ω
Video Output Level .............................................................................1.0±0.2V
Environment
Operating Temperature .............................................................-10°C ~ +60°C
Storing Temperature..................................................................-20°C ~ +70°C
Operating Humidity ..................................................................... 45%~80%RH
Storing Humidity ......................................................................... 30%~90%RH
Note:
When the unit is operated to extremes, such as with maximum power output for a long time,
or the temperature is over 70°C, it will enter heat protection mode, the volume will be reduced
automatically. This is normal.
Specications
Supported Formats:
·USB or memory le format: FAT32
·Mp3 bit rate(date rate): 32-320 Kbps and variable bit rate
·WMA v9 or earlier
·Directory nesting up to a maximum of 8 levels
·Number of albums/folders: maximum 99
·Number of tracks/titles: maximum 999
·ID3 tag v2.0 or later
·File name in Unicode UTF8(maximum length:128 bytes)
Unsupported Formates:
·Empty albums:an empty album is an album that does not contain MP3/WMA les,and is not be
shown in the display.
·Unsupported le formats are skipped.For example,Word documents(.doc) or
Mp3 les with extension.dlf are ignored and not played.
·AAC,WMV,PCM audio les
·DRM protected WMA les(.wav,.m4a,.m4p,.mp4,.aac)
·WMA les in Lossless format
Supported MP3 Disc Format:
·ISO9660,Joliet
·Maximum title number: 512(depending on le name length)
·Maximum album number: 255
·Supported sampling frequencies: 32kHz,44.1kHz,48kHz
·Supported Bit-rates: 32-320Kbps and variable bit rate
Supported Video Formats:
·DVD
·MP4
·Xvid
Region Code
According to DVD sale region, the whole world is divided into six regions. A DVD disc can be
played back only when its region code is compatible with that of the player in use.
Region 1: USA, Canada, East Pacic Ocean Islands;
Region 2: Japan, West Europe, North Europe, Egypt, South Africa, Middle East;
Region 3: Taiwan of China, Hong Kong of China, South Korea, Thailand, Indonesia, South East
Asia;
Region 4: Australia, New Zealand, Mid & south America, South Pacic Ocean Islands/Oceania;
Region 5: Russia, Mongolia, India, Middle Asia, East Europe, North Korea, North Africa, North
West Asia;
Region 6: Chinese Mainland.
Cautions when using Discs
1. DO NOT use irregular shaped disc.
2. Disc Cleaning
Use a dry, soft cloth to wipe the disc from center to edge, only neutral detergent can be used.
3. When playing a new disc
New disc may have some rough spots around the inner and outer edges. If such a disc is used,
remove these rough spots with a pencil or ball-point pen, etc.
Specications

23 24
Troubleshooting
What appears to be trouble is not always serious. Please check the following points before calling
a service center.
Problem Cause Corrective action
General
Unit can not power on
Unit fuse blown. Install new fuse with correct rating.
Car battery fuse blown. Install new fuse with correct rating.
Illegal operation Reset the unit.
Remote control does not work Battery depleted. Change the battery.
Battery installed incorrectly. Install the battery correctly.
No/low audio output
Improper audio output connection. Check wiring and correct.
Volume set too low. Increase volume level.
Speakers damaged. Replace speakers.
Heavily biased volume balance. Adjust the channel balance to center
position.
Speaker wiring is in contact with metal part of car. Insulate all speaker wiring connections.
Poor sound quality or
distortion
Pirated disc is in use. Use original disc.
Speaker power rating does not match unit. Replace speakers.
Wrong connections. Check wiring and correct.
Speaker is shorted. Check wiring and correct.
Unit resets itself when engine
is off Incorrect connection between ACC and BATT. Check wiring and correct.
TFT monitor
Warning information is shown
at all times Parking break wiring is not correct. Check wiring and correct.
Flashing image or interference
appears on screen
The color system of DVD disc does not match the
monitor.
Adjust the color system of the DVD disc
playing back or the monitor in use.
Pirated disc is in use. Use original disc.
Video cable damaged. Replace cables.
Improper video signal connections. Check wiring and correct.
Disc playback
Cannot insert disc A disc is already inside the unit. Eject current disc and insert new one.
Disc does not play back
Disc is warped or scratched. Use disc in good condition.
Disc is dirty or wet. Clean disc with soft cloth.
Incompatible disc is used. Use compatible disc.
Disc is inserted upside down. Insert disc with label side up.
Disc region code is not compatible with unit. Use disc with proper region code.
PBC cannot be used during
VCD playback PBC is not available on the disc. Use disc with PBC available.
Repeat or search function is
invalid during VCD playback PBC is on. Turn PBC off.
Error messages
No disc
Disc is dirty. Clean disc with soft cloth.
Disc is upside down. Insert disc with label side up.
No disc inside. Insert disc.
Bad disc Disc is dirty. Clean disc with soft cloth.
Disc is upside down. Insert disc with label side up.
Unknown disc Disc format is not compatible with this unit. Use disc with compatible format.
Region Error DVD region code is not compatible with
this unit. Use disc with compatible region code.
Installation
Disconnecting the Battery
To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable
prior to installation.
Note:
If the unit is to be installed in a car equipped with an on-board drive or navigation computer, do
not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost.
Under these conditions, use extra caution during installation to avoid causing a short circuit.
Remove Transport Screws
WARNING! Remove these two transport screws before installation. Otherwise, the DVD player
will not work.
Replacing the Fuse
When replacing the fuse, use a new 15A replacement fuse. Using a fuse with an improper rating
could damage the unit and cause a fire.

25
Wire Connections
yellow
yellow
blue
white
white
white
red
red
red
FRONT
AV IN REAR
AV system
rear display
SUB OUT
VIDEO OUT
black
MIC
RADIO ANT
MIC
USB
CAMERA IN
CAMERA
black
yellow

P/N:127075005483