Marathon 105-DT01 User manual

800.840.1228 /MARATHONHARDWARE.COM 800.840.1228 /MARATHONHARDWARE.COM
Undermount Slide Drawer Assembly Tool
Technical Specications & Assembly
Undermount Slide Drawer Assembly Tool
 Essential tool for installing DTC Undermount Slides
 Drill hole using 6mm bit for rear hooks
 Drill pilot hole with 2.5mm bit for mounting screws
Product Features
Undermount Slide Drawer Assembly Tool
Description Part#
Undermount Slide Drawer Assembly Tool 105-DT01
Assembly Tool Dimensions(mm)
The Undermount Slide Drawer Assembly Tool is the ideal
jig for drilling precise holes that are used for fixing an
undermount slide to the drawer box.

800.840.1228 /MARATHONHARDWARE.COM
Technical Specifications & Assembly
Drawer Assembly
Undermount Slide Drawer Assembly Tool
Drawer Assembly
Drill a hole using 6mm drill bit to a depth of 10mm. Mark the position of the fourth hole
for standard drawer
Mark the position of the locking device and drill a pilot hole using 2.5mm drill bit. Fix the locking device onto the
drawer bottom.