Mareli PureAIR User manual

MARELI LTDMARELI LTDMARELI LTD
Owner’s Manual
Read and Follow All Safety Instructions
Save These Instructions
PureAIR
High performance professional Air Sanitizers
UV-C technology
Hisar #1 str. v. Duvanlii 4174 region Plovdiv, Bulgaria
00359 887 27 33 47
[e-mail]
www.mareli-bg.com

Hisar #1 str. v. Duvanlii 4174 region Plovdiv, Bulgaria
00359 887 27 33 47
[e-mail]
www.mareli-bg.com
3
MARELI LTDMARELI LTDMARELI LTD
Hisar #1 str. v. Duvanlii 4174 region Plovdiv, Bulgaria
00359 887 27 33 47
[e-mail]
www.mareli-bg.com
2
MARELI LTDMARELI LTDMARELI LTD
PureAIR High performance professional Air Sanitizers
Chemical and ozone-free air disinfection with simultaneous
odour reduction.
The UV-FAN is predestined for use in rooms where people are
present and can be used in 24h operation.
The PureAIR®
Air Sanitizers are germicidal ultraviolet xtures that
effectively destroy airborne microbes including bacteria, mold
and virus in enclosed spaces
The continuous disinfection of the air is an essential measure
against the spread of microorganisms and viruses.
Nosocomial infections are reliably prevented and people with
weakened immune systems are optimally protected.
Likewise, the health risk for employees due to
infections and the development of multi-resistance due to the
otherwise high use of chemical disinfectants is reduced.
The PureAIR®
Air Sanitizers to protect occupants including but not limited to
personnel, clients and patients from infection
due to airborne microbes, particularly in crowded or poorly
ventilated areas, and in situations where the risk of cross in-
fection is high.
The PureAIR®
Air Sanitizers utilize Germicidal Ultraviolet Lamps which are
completely enclosed within a stainless steel exposure cham-
ber and are safe for use in every application
SAFE
No risk of over-exposure.
FAST
Disinfects air in seconds.
EASY
Plug feed cable and Switch on
AUTOMATIC
Continuous disinfection without special attention.
DURABLE
Stainless Steel and Antibacterial Powder coated steel
The PureAIR®
design has been carefully conceived to provide adequate germicidal ultraviolet
exposure for air disinfection in occupied areas.
The dosage, as it applies to ultraviolet disinfection, is a function of time, and
the intensity, of ultraviolet radiation, to which the air is exposed.
HIGHLY RECOMMENDED FOR:
• Hospital rooms
• Operating
• Clinics, Laboratories
• Pharmaceutical and food industry
• Ofces
• Retail outlets
• Hotels and public places
PRE-FILTER Included
Additionally equipped with a TiO2 ltr (photocatalys) tfor odour reduction.
Unpleasant odours caused by humans and other organic compounds are re-
duced. The escaping air is simultaneously enriched with oxygen.

Hisar #1 str. v. Duvanlii 4174 region Plovdiv, Bulgaria
00359 887 27 33 47
[e-mail]
www.mareli-bg.com
5
MARELI LTDMARELI LTDMARELI LTD
Hisar #1 str. v. Duvanlii 4174 region Plovdiv, Bulgaria
00359 887 27 33 47
[e-mail]
www.mareli-bg.com
4
MARELI LTDMARELI LTDMARELI LTD
::::::::::::::::::::::::::::::::::::::::::::::::::::::: CONTENT :::::::::::::::::::::::::::::::::::::::::::::::::::::::
I Conventional symbols noticed on devices page 5
II Warning / Caution page 6
III How it’s work / Construction / Technical Characteristics page 7
IV Commissioning / Safety and Maintenance instructions page 8 / 9
V Additional Equipment / Standards page 10
VI Service / Warranty conditions / Ecology page 11
Notes / Service history page 12 / 15
Content I. Conventional symbols noticed on devices
Follow all instructions on any labels or tags.
Carefully inspect all packing materials before discarding to prevent the loss of accessories,
mounting hardware, spare parts or instructions.
Mareli company takes all possible precautions when packaging equipment to prevent damage.
Carefully inspect and report all damages immediately.
Do not install damaged equipment.
This appliance must not be used by children under the age of 8 and persons with limited physi-
cal, sensory or mental abilities, or with insufcient experience and knowledge, unless they have
been observed or instructed in the safe use of the appliance and understand the dangers. Chil-
dren should not play with the appliance. Children should not be clean or service the appliance.
Type a message
• All personnel should be alerted to the potential haz-
ards indicated by the product safety labeling on this unit.
• The following conventions are used to indicate and
classify precautions in this manual and on product safe-
ty labeling. Failure to observe precautions could result in
injury to people or damage to property.
WARNING!
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
CAUNTION!
Caution indicates a POTENTIALLY hazardous situation,
which, if not avoided, MAY result in minor or moderate
injury.
Do not do this
Follow the instructions
WARNING! UV-C Exposure
It is forbidden to touch with ngers, insert objects, etc.
No standing or sitting on the unit
ELECTRICAL SHOCK or ELECTROCUTION hazard
Make sure you disconnect the power plug from the socket.
Make sure you turn off the power.
Wear approved ultraviolet blocking eyewear
Wear protective gloves
Wear approved ultraviolet blocking face shield
Fire hazard
The meaning of symbols

Hisar #1 str. v. Duvanlii 4174 region Plovdiv, Bulgaria
00359 887 27 33 47
[e-mail]
www.mareli-bg.com
7
MARELI LTDMARELI LTDMARELI LTD
Hisar #1 str. v. Duvanlii 4174 region Plovdiv, Bulgaria
00359 887 27 33 47
[e-mail]
www.mareli-bg.com
6
MARELI LTDMARELI LTDMARELI LTD
CAUTION!
Indoor Use Only – The equipment must be sheltered from exposure to the elements and extremes in temperature.
The sanitizer must not be exposed to moisture, condensation, water vapor or vibration.
The sanitizer should only be used and stored in dry rooms with a temperature range from 10° to 40°
Do not cover the unit.
No standing or sitting on the unit
Avoid exposure to direct or reected germicidal ultraviolet rays. Germicidal ultraviolet rays are harmful to the
eyes and skin. Use all protective equipment
Always use protective equipment when replacing the UV-C light source.
Do not change the design and construction of the unit.
Do not use the unit for any purpose other than those intended in this guide.
Do not remove any warning signs or stickers from the unit.
UV-C light sources should be cleaned every month carefully with a cotton cloth and alcohol.
The germicidal ultraviolet lamps used in the PurAIR® have a manufacturer’s rated average effective life of
9000 hours.Lamps may operate longer than their rated effective life, but the reduction in ultraviolet output
will make it impractical to use past the manufacturer’s rated life. For maximum efciency lamp replacement is
recommended every six months of continuous operation.
Repair of the unit or replacement of electrical parts must only be carried out by the manufacturer or a
authorized services.
WARNING!
Avoid exposure to direct or reected germicidal ultraviolet rays.
Germicidal ultraviolet rays are harmful to the eyes and skin.
To prevent the risk of severe or fatal electrical shock, special precautions must be taken since liquid is
present near electrical equipment.
• Always disconnect power before performing any service or maintenance.
Make sure the power plug is clean and insert it all the way into the socket.
• A dirty plug can cause a re or electrical shock.
The unit must not be modied or repaired by the customer. Contact with the manufacturer.
• If the power cord is damaged, it must be replaced by the manufacturer or authorized services to avoid haz-
ardous situations.
Do not insert ngers or any objects into the holes for inlet or outlet air.
• This may cause serious injuries.
In case you notice any unusual signs (in case of a burnt smell, for example), stop the unit and pull the plug of
the power cord from the socket or switch off the main power supply.
• Continued operation of the unit in the event of an abnormal condition may result in damage, re or electrical
shock. In such cases, contact the manufacturer or authorized services.
Do not wind, pull, damage, or modify the power cord.
Do not expose it to heating or place any objects on it.
• This may cause a re or electric shock.
UV-C light sources contain a small amount of mercury - beware of breakage! If you break a lamp, ventilate the
room where the breakage occurred.
Clean with a mercury vacuum cleaner or other suitable means that avoid the formation of dust and mercury va-
pors, such as a towel or syringe, which are also discarded after use, as well as personal protective equipment.
Hand over the hazardous waste to the local branch of the Ministry of Environment and Water with the help of a
closed container.
II. Warning / Caution III. How it’s work / Construction / Technical Characteristics
• Original PHILIPS® bactericidal ultraviolet lamps, which delivers ultraviolet energy with a specic wavelength of 254
nanometers (nm) and are highly effective against microbes in the air, including: virus, bacteria and mold spores.
• The device consists of a special UV powder coated outer housing and a stainless-steel inner housing in which the UV-C
tube is installed.
• With the help of two fans, air is forced into the disinfection chamber.
• The special construction prevents direct and indirect radiation of UV radiation.
• The device also has lters for capturing solid particles.
• Quick and easy access to replace the UV-C light source.
• Designed for use in hospital rooms, operating rooms, clinics, laboratories, pharmaceutical and food industries, ofces,
retail outlets, schools, kindergartens, homes.
How it’s work / Construction
Input Voltage, Frequency 220-240V / 50-60Hz
Electrical Power 95W (UV-C lamp with 2G11 socket)
Ingress protection IP20
Recommended room volume [m3/h] up to 120 m3/h
Noise emission [dB] 47 dB (+/- 5%)
Operating temperature [C°] 5° to 40°
Dimensions (mm)
Height: 1192
Width: 350
Depth: 107
UV-C tube
Brand: PHILIPS
Installed light 1
Consumption 95W
Wavelenght 254 nm
Tube replacement interval [h] 9000 hrs (75 % ±5 % output
performance)
Technical Characteristics
1192
443
350 107
187
A A
B B
C C
D D
E E
F F
4
4
3
3
2
2
1
1
DRAWN
CHK'D
APPV'D
MFG
Q.A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
SURFACE FINISH:
TOLERANCES:
LINEAR:
ANGULAR:
FINISH:
DEBURR AND
BREAK SHARP
EDGES
NAME
SIGNATURE
DATE
MATERIAL:
DO NOT SCALE DRAWING
REVISION
TITLE:
DWG NO.
SCALE:1:10 SHEET 1 OF 1
A4
WEIGHT:
Assem UVC_FACE

Hisar #1 str. v. Duvanlii 4174 region Plovdiv, Bulgaria
00359 887 27 33 47
[e-mail]
www.mareli-bg.com
9
MARELI LTDMARELI LTDMARELI LTD
Hisar #1 str. v. Duvanlii 4174 region Plovdiv, Bulgaria
00359 887 27 33 47
[e-mail]
www.mareli-bg.com
8
MARELI LTDMARELI LTDMARELI LTD
IV. Commissioning / Safety and Maintenance instructions
• Remove the PurAIR® Sanitary from its shipping container.
• Carefully inspect all packing materials to prevent the loss of accessories, mounting hardware, spare parts or instruc-
tions. Do not discard packing materials until sterile conditioner is assembled and all components are accounted for.
• Mareli Ltd takes all possible precautions when packaging this model to prevent damage.
Carefully inspect the Sanitary Conditioner for damage, report all damage immediately.
Do not assemble or operate if there is any damage, visible or suspected.
Unpacking
CAUTION!
1. After removing of packaging and product verication that everything is without defects, injuries, missing parts
and accessories you can proceed to plugging in the Schuko socket.
Plug the unit into an approved ground fault circuit interrupter (GFCI) receptacle.
Do not operate without proper electrical ground.
2. Switch on through using the switch, located in the lower left corner of the unit
3. After switching on, only a slight noise should be heard from the operation of the air fans.
If you hear loud noise or any other disturbing circumstances, please switch off the appliance immediately and
inform the manufacturer / supplier.
Installation
Maintenance
1. Replacement or maintenance of a light
source.
Attention! Unplug the power cord.
Make sure that the unit does not work.
Step #1
Turn the device from the back and
push down the special fasteners and
pull towards you. Fig. №1
Step #2
Using a screwdriver or electric screw-
driver, unscrew the middle cover of the
appliance as shown in Fig. №2 and
pull it towards you to open it and have
access to the light source. Fig №2.1
Step #3
Maintenance:
UV-C light sources should be carefully
cleaned only with a cotton cloth and
alcohol. Do not touch the light source
with bare hands.
Light source Replacement:
Always use the protective equipment
described in this manual!
Carefully remove the UV-C light source
and place it in a place where it will
not break. Then transfer it to special
disposal points.
Install the new light source.
Close the appliance in reverse order.
.
Fig. #1 Fig. #2
Fig. #3
Fig. #2.1
IV. Commissioning / Safety and Maintenance instructions
Maintenance
2. Maintenance
WARNING! Always disconnect power to
the unit before performing any service
or maintenance.
Step #1
Turn the device from the back and
push down the special fasteners and
pull towards you. Fig. №4
Step #2
Using a screwdriver or screwdriver, un-
screw the lters located at the bottom
of the appliance.
Step #3
Maintenance:
Wash them with warm water and let
them dry completely.
Then install them in reverse order.
Filter Replacement:
Replace them with new ones that you
can order from your supplier or manu-
facturer.
Fig #4
• When transporting the devices, follow the rules prescribed on the packaging by the manufacturer.
• Switch on the device after transport, only after staying in the room for at least 1 hour for acclimatization.
• The normal operating temperature of the devices is different and is noted in the accompanying documentation.
• The devices are connected to the mains only by means of a straight and zero schuko socket.
• The mains voltage must be 230V ± 10% with a frequency of 50 Hz, in accordance with the EN IEC 60038 standard.
• No objects should be placed on or around the devices that would impede their ventilation and cooling.
• In case of thunderstorms, disconnect the devices from the sockets
• The devices must be protected from shocks and shocks
• Device is not moisture and waterproof and should be installed in rooms with humidity not exceeding 85% RH.
• If a device is connected to a power strip, no other large power consumers, such as electric radiators, stoves, air condi-
tioners, etc., should be connected to the power strip

Hisar #1 str. v. Duvanlii 4174 region Plovdiv, Bulgaria
00359 887 27 33 47
[e-mail]
www.mareli-bg.com
11
MARELI LTDMARELI LTDMARELI LTD
Hisar #1 str. v. Duvanlii 4174 region Plovdiv, Bulgaria
00359 887 27 33 47
[e-mail]
www.mareli-bg.com
10
MARELI LTDMARELI LTDMARELI LTD
VI. Service / Warranty conditions / Ecology
Complaints
COMPLAINTS
• The customer lodges a complaint during the warranty period immediately after noticing the damage.
• The complaint is submitted to the specied phone number:
[phone] or email:
Stoyan Mishinkov - [e-mail]
• The repair of the defective product is carried out within the legal term up to 30 days.
IRREVOCABLE DEFECTS.
• In case of an irreparable defect during the warranty period, the SUPPLIER replaces the defective product with a new
one within 30 days after establishing the irreparable defect.
• Replacing a defective product with a new one is done with the same model. If at the moment, the given model is no
longer offered for sale by the SUPPLIER, it is replaced with its new analogous model, without the customer having to pay
for it.
For damages caused by non-fulllment of item 1 described below by this warranty card / conditions or circumstances
independent of the SUPPLIER, the same is NOT responsible, the warranty is void and the elimination of damages is only
against payment.
Warranty conditions
• Warranty - 24 months from the date of purchase of the product.
• The warranty period of 24 months only applies to the disinfection device.
The sources of UV-C radiation (light sources) have a guarantee of 9000 working hours.
WARRANTY DISCLAIMER
Warranty void. The customer loses his right to warranty in the following cases
1. In the absence, deletion or damage of an identication / serial number or warranty, warning or information sticker.
1.2 In case of damage caused by improper transportation, relocation,
storage and installation.
1.3. In case of damage caused by thunderstorms, lightning, re, ood and all other natural disasters.
14. In case of malfunction or large uctuations in the electrical network, including instantaneous starting overvoltage /
electric shock /.
1.5. In case of an attempt to eliminate a defect by an incompetent and unauthorized person from the SUPPLIER.
1.6. If the power cord is cut or damaged
Ecology
• Electrical and electronic appliances contain many valuable materials.
• They also contain certain substances, mixtures and components that were necessary for their functioning and safety.
• In household waste, as well as in improper handling, they can harm human health and the environment.
• Therefore, do not dispose of the used appliance in the household waste.
V. Additional Equipment / Standards
Additional Equipment
TIO2 FILTER
The reduction of the environmental atmospheric pollution can
be achieved by a natural reaction, called photocatalysis.
TiO2 photocatalytic air lters help you enhance productiv-
ity by radically improving air quality, reducing odors, and
destroying microscopic particles that can lead to illness.
This, in turn, can have a measurable effect when preventing
illness from disrupting the workplace. Photocatalytic tech-
nology goes a step beyond air lters you might have used in
the past due to its ability to attack mold, viruses, and bacte-
ria in the air and on surfaces.
AVAILABLE SOON
• SMART CONTROL PANEL
• REMOTE CONTROL SYSTEM
Monitor and control remotely by Remote / App
• PIR SENSOR
Standards
• 60335-2-65
• 55014-1,2
• 61000-3-2,
• EN 60335-1
• EN 60335-2-65
• EN 55014-1
• EN 55014-2
• EN 61000-4-6

12 13

14 15

MARELI LTD
Hisar 1 str. v. Duvanlii, region Plovdiv
Bulgaria
00359 887 27 33 47
[e-mail]
www.mareli-bg.com
последна промяна
01/09/2020 - Док №00101092020