SAFETY WARNINGS
xAll the safety and operating instructions should be read before the units is operated.
xThe wiring of your electrical installation is live (230 V) and extremely dangerous. Never connect the
module when plugged into the mains. Always turn off the main switch before starting the installation.
Precautions for anti-lightning and anti-surging should be taken if necessary.
xDuring the course of transportation, storage and installation, the product should be avoided from
incorrect operations such as heavy pressing, strong vibration etc., which can cause damage of the
product as there are sophisticated optical and electronic devices inside the machine.
xThis product is for professional use and should be installed by a certified installer.
xDo not operate it in case temperature, humidity and power supply are beyond the limited stipulations.
xDo not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing
serious injury to a person and serious damage to the unit. Use only with a stand, tripod, bracket, or
mount recommended by Marmitek or sold with the product. Any mounting of the unit should follow
the manufacturer’s instructions and should use mounting accessory recommended by manufacturer.
xIf necessary, use a commercial lens cleaning paper to clear the lens windows. Gently wipe the lens
window until clean.
xIn case of improper usage or if you have altered and repaired the product yourself, all guarantees
expire. Marmitek does not accept responsibility in the case of improper usage of the product or when
the product is used for purposes other than specified. Marmitek does not accept responsibility for
additional damage other than covered by the legal product responsibility.
xThis product is not a toy. Keep out of reach of children.
© MARMITEK
4
