Marquette Eagle 4000 Quick start guide
FIELD SERVICE MANUAL
NOTE
Theproceduresinthismanualreflectsoftwareversion
6.
Trademarked names appear throughout this document. Rather
than list the names and entities that own the trademarks or
insert a trademark symbol with each mention of the trademarked
name, the publisher states that it is using the names only for
editorial purposes and to the benefit of the trademark owner with
no intention of improperly using that trademark.
ACCUSKETCH, APEX, AQUA-KNOT, ARCHIVIST, BABY MAC,
CASE, CD TELEMETRY, CENTRA, CHART GUARD, CINE 35,
CORO, COROMETRICS, CRG PLUS, DIGISTORE, Digital DATAQ,
E for M, EAGLE, Event-Link, HELLIGE, IMAGE STORE, LASER
SXP, MAC, MAC-LAB, MACTRODE, MARQUETTE, MARQUETTE
UNITY NETWORK, MARS, MAX, MEI, MEI in the circle logo,
MEMOPORT C, MIDAS SYSTEM, MIDASNET, MINISTORE,
MINNOWS, Monarch 8000, MULTI-LINK, MULTISCRIPTOR,
MUSE, Neo-Trak, OXYMONITOR, PRESSURE-SCRIBE, PRES-R-
CUFF, QMI, QS, Quantitative Medicine, Quantitative Sentinel,
Qwik Connect Spiral, RAMS, SAM, SEER, SOLAR, Spectra 400,
Spectra-Tel, ST GUARD, TRAM, TRAM-NET, TRAM-RAC,
TRAMSCOPE, TRIM KNOB, UNITY NETWORK, UNITY twist logo,
Vari-X, Vari-X Cardiomatic, and VAS are trademarks of Marquette
Medical Systems, Inc. registered in the United States Patent and
Trademark Office.
12SL, 15SL, AccuVision, ADVANTAGE, AUTOSEQ, BODYTRODE,
CardioMail, CardioServ, CardioSmart, CardioSpeak, CardioSys,
CD TELEMETRY‚-LAN, CENTRALSCOPE, Corolation, Corometrics
Sensor Tip, CV Mail, CV-Web, DASH, EDIC, HI-RES, IMAGE
VAULT, INTELLIMOTION, INTER-LEAD, LIFEWATCH,
MARQUETTE MEDICAL SYSTEMS, MARQUETTE‚RESPONDER,
MENTOR, MIDAS Com, MRT, MUSE CardioWindow, MUSE CV,
MUSEWord, O2SENSOR, OMRS, OnlineABG, Premium, RSVP,
SILVERTRACE, SMART-PAC, SMARTLOOK, SOLARVIEW,
Spectra-Overview, Trimline, UNITY, and Universal are trademarks
of Marquette Medical Systems, Inc.
© 1997 Marquette Medical Systems, Inc. All rights reserved.
Registered trademarks
Trademarks
EAGLE 4000 PATIENT MONITOR
T-2 407300-123 REVISION E
TRADEMARKS AND COPYRIGHT
DOCUMENT DATE DOCUMENT PART NUMBER
12 MAY 1997 407300-123
Copyright
GENERAL
EAGLE 4000 PATIENT MONITOR
REVISION E 407300-123 III
The following are telephone numbers and addresses for
contacting various Marquette Electronics Service and Supplies
Division departments.
Supply items are generally items used during normal operation
of a product. Leadwires, electrode paste, patient cables, and
printer paper are examples of supply items.
Make telephone inquiries about supply items at:
1-800-558-5102 (U.S. only),
1-407-575-5000 (outside the U.S.), or
1-407-575-5050 (fax).
Address orders or inquiries to:
Attn: Supplies Department
Marquette Electronics Service & Supplies Division
P.O. Box 9100
100 Marquette Drive
Jupiter, FL 33468-9100
Service parts are items that are not expended in the normal
operation of the product. They are generally replacements for
defective or malfunctioning items inside the product. Service
parts include PCB assemblies, electronic components, internal
cables and harnesses, software or firmware, and operator and
service manuals. When ordering additional operator manuals,
remember to notate the software version from the start-up
screen.
A part number for the item to be replaced is necessary for
ordering a service part. If the part number for the desired item is
unobtainable, the following will be necessary to order the item:
• model and serial number of the equipment,
• part number/name of the assembly where the item is used,
• item name, and
• where applicable, reference designation (ex., R3, S1, U32).
To open a service call with Marquette Electronics Service
Department, contact Service Dispatch at:
1-800-558-7044 (U.S. only), or
1-407-575-5000 (outside the U.S.).
For questions regarding service maintenance agreements,
contact the service and supplies division at:
1-800-552-3248, or
1-407-575-5000 ext. 4206.
HOW T OREACH US...
TELEPHONE NUMBERS AND
ADDRESSES
ORDERING SUPPLY ITEMS
ORDERING SERVICE PARTS
SERVICE MAINTENANCE
AGREEMENTS
SERVICE CALLS
GENERAL
EAGLE 4000 PATIENT MONITOR
IV 407300-123 REVISION E
HOW TOREACH US... (CONT)
Technical Support has the most current information about your
equipment and can provide assistance with any technical
questions or problems.
For technical advice concerning any equipment in your
Marquette Electronics monitoring system, contact Tech
Support—Monitoring Hardware at:
1-800-558-7822, or
(407) 575-5000 ext. 4216.
For technical advice concerning your Telemetry system, contact
Tech Support—Telemetry at:
1-800-552-3243, or
(407) 575-5000 ext. 4202.
For technical advice concerning Series 3000, 7000/7010 patient
monitoring equipment, contact Tech Support:
1-800-443-0980, or
(407) 575-5000 ext. 4217.
Some Marquette products (Input Modules, Tram modules, Series
7700 ECG Telemetry Transmitters, and CD Telemetry
Transmitters) are repaired on a 48-hour turnaround basis.
To inquire about status of 48-hour turnaround repair items, or if
you have questions before shipping an assembly to be repaired,
call: 1-800-552-3243, or
(407) 575-5000.
Send items for 48-hour repair and all monitoring repair items to:
Attn: Monitoring Repair
Marquette Electronics Service and Supplies
P.O. Box 9100
100 Marquette Drive
Jupiter, FL 33468-9100
The main switchboard operator will direct your call to the person
most able to assist you. For any other questions or problems,
contact the main switchboard operator at:
1-800-558-5120, or
(407) 575-5000.
TECHNICAL SUPPORT
For All Hardware
Series 7000/7010
Telemetry
48-HourTurnaround Repair
Service Address
MAIN SWITCHBOARD
GENERAL
EAGLE 4000 PATIENT MONITOR
REVISION E 407300-123 V
Trademarks and Copyright..............................................ii
How To Reach Us ............................................................... iii
Telephone numbers and addresses.................................iii
Ordering supply items....................................................iii
Ordering service parts ....................................................iii
Service calls ...................................................................iii
Service maintenance agreements....................................iii
Technical Support .......................................................... iv
Main switchboard........................................................... iv
Product Description ..........................................................1-2
About the monitor ....................................................... 1-2
Marquette Unity Network ..................................................1-3
Monitor application ..................................................... 1-3
Patient monitoring system application......................... 1-3
Hospital-wide network application............................... 1-3
Front Panel Controls/Connectors ......................................1-4
Rear Panel Controls/Connectors........................................1-5
About the remote alarm connector .............................. 1-6
Performance Specifications ...............................................1-7
Preparation For Use.........................................................1-16
Power requirements .................................................. 1-16
Equipment ground requirements............................... 1-16
Fuse and voltage setup.............................................. 1-17
Voltage selector card setup ........................................ 1-17
Monitor ventilation requirements .............................. 1-18
Mounting recommendations ...................................... 1-18
Software setup .......................................................... 1-18
Theory of Operation ........................................................1-19
Overall block diagram ............................................... 1-19
Overall block theory .................................................. 1-20
Power supply PCB block diagram .............................. 1-21
Power supply PCB block theory ................................. 1-22
Acquisition PCB block diagram.................................. 1-23
Acquisition PCB block theory .................................... 1-24
Processor PCB block diagram .................................... 1-25
Processor PCB block theory....................................... 1-26
(Optional) EtCO2 PCB block diagram ........................ 1-27
(Optional) EtCO2 PCB block theory ........................... 1-28
Maintenance Schedule.......................................................2-2
Manufacturer recommendation ................................... 2-2
Manufacturer responsibility ........................................ 2-2
Visual Inspection...............................................................2-3
Inspecting the monitor ................................................ 2-3
Cleaning The Monitor ........................................................2-4
Cleaning the display.................................................... 2-4
Cleaning the external surfaces .................................... 2-4
Manufacturer recommendation ................................... 2-4
TABLE OF CONTENTS
GENERAL
SECTION 1
EQUIPMENT OVERVIEW
SECTION 2
MAINTENANCE
Table of contents
Other Marquette Monitor manuals
