Marshall Electronics V-R70P-HDSDI User manual

Marshall Electronics
1910 East Maple Ave.
El Segundo, CA 90245
Tel.: [phone] • Fax: [phone]
www.LCDRacks.com
Email: [email protected]
1
2
3
4
5
Product Overview
Features
Standard Accessories
Optional Accessories
Electrical Specifications
Mechanical Specification
Faceplate Cleaning
Operational Setup
Input Connectors
Switch Settings, Functions and Indicators
Warranty
6
7
8
9
10
11
11 Warranty
Marshall Electronics warranties to the first consumer, that this V-R70P-HDSDII portable monitor will, under normal use, be free from defects in
workmanship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase pro-
vided with a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor and parts may be
charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in
design or construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than
those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
Due to constant effort to improve products and product features, specifications may change without notice.
©Marshall Electronics • 1910 East Maple Avenue • El Segundo, CA • Product and features subject to change
V-R70P-HDSDI
Users Guide
Users Guide

V-R70P-HDSDI Users Guide Marshall Electronics
The V-R70P-HDSDI features Marshall’s proprietary TFT-MegaPixel™ display system and represents leading edge technology in
LCD imaging for broadcast and professional video applications. This is a low cost HDSDI stand alone monitor and is constructed
with a durable enclosure featuring an optical grade polycarbonate protective cover for the antiglare/antireflective screen. A V-Mount
battery adapter is also included and the monitor can be powered for over 5 hours with a 50WH battery. The 1.2-million pixel TFT
screen has 130 degree viewing angles and incorporates completely digital signal processing to provide image reproduction that
exceeds all CRT displays available in a similar form factor. All SMPTE/ITU High Definition and Standard Definition digital video
standards and signal types are accepted and displayed on this model. All video formats are scaled to fit on screen in the highest
resolution using a state of the art LSI that incorporates 4x4 pixel interpolations with precision Gamma correction to produce the
best images available. Additional features include, three LED tally, setup memory, Blue Gun, and direct access for all adjustment
and selection functions.
1Product Overview
2Features
High Definition Displays Capable of displaying more than 900 TV Lines resolution. Standard definition is internally up converted to High
Definition. All signals remain completely digital to provide the most exact images available.
Standard Input (BNC) • HDSDI (SMPTE292M/296M) (reshaped and re-clocked output)
• SDI (SMPTE259M) (ITR-U601) (reshaped and re-clocked output)
Durable metal enclosure • Protection for all connections and controls with strategically placed ventilation for use in harsh environments
Protective Screen Cover • Optical grade polycarbonate screen cover with Antireflective / Antiglare coating
Display Multiple Screen
Formats and Frame Rates
• 525 –60i / 625 - 50i (Interlaced)
• 720 x 1280 - - 23.97P, 24P, 25P, 50P, 59.94P, 60P (Progressive)
• 1035 x 1920 - 59.94i, 60i (Interlaced)
• 1080 x 1920 – 50i, 59.94i, 60i / 23.973Psf, 24Psf, 25Psf, 29.97Psf, 30Psf
Memory Function • Adjustment Settings Memory stored on shutdown and recalled when power is applied
Blue Screen • Use for adjustment to SMPTE color Bars
Built in color bars • For screen testing purposes
Tally (DB-15) • Three LEDs (Red, Green, Amber) produce 7 different tally indications
3Standard Accessories Accessories Supplied with the V-R-70P-HDSDI
4Optional Accessories
Stand V-LCD4-ST Use for table top mount
Camera Hot Shoe Mount V-LCD4-MT Attaches monitor to camera
Sun Hood V-H700P Use for viewing in bright lighting or outdoors
27
• Users manual
• “Brick” type 12vdc power supply with 4 Pin Female XLR connector
• “V” Mount battery adapter
• ¼”-20 mounting plate
10 Switch Settings, Functions and Indicators
Tally Indicators
Power On/Off switch
Illuminates red when
system power is
present
Illuminates Green when
monitor is ON
BLUE GUN for
adjustment using
SMPTE color bars
HDSDI/SDI Signal indication Lights for active format
Screen aspect ratio switch 4:3 or 16:9 selector and indicators
16:9 Aspect 4:3 Aspect

Marshall Electronics
Optional Accessories (continued)
Power Adapter Cable V-PAC-D-XLR Use with Anton Bauer D-type connection
Power Adapter Cable V-PAC-XLR-1 Use with 4 Pin XLR connections
Sequential 2 channel charger IDX-VL-2Plus
2-channel sequential charger with a built-in 60W power sup-
ply. Charges 2 ENDURA E series batteries in fewer than 5
hours. One 10’ XLR cable included.only 2 lbs
Sequential 4 channel charger IDX-VL-4
Economically charges 4 ENDURA E series batteries in
under 6 hours using Full Power Charge (FPC) method
Simultaneous 4 channel charger IDX-VL-4S Charges 4 ENDURA E series batteries in 2.5 hours or less
55 W Lithium Battery IDX-E50S V-Mount battery pack with 3 LED power Indicator
55 W Lithium Battery
with Power Link IDX-E50 V-Mount Battery Pack with PowerLink includes accurate
Power Status Display and supports Digi-View
82 W Lithium Battery IDX-E80S V-Mount battery pack with 3 LED power Indicator
82 W Lithium Battery
with Power Link
IDX-E80
V-Mount Battery Pack with PowerLink includes accurate
Power Status Display and supports Digi-View
Protective Carry Case V-CC1 Manufactured by Storm Case
Analog to Digital Converter BC-0909-AD Converts analog Composite, YC, or component to
HDSDI/SDI
Mounting Plate Attaches to any side for mount to ¼-20 threaded component
Cleaning Wipes V-HWP-K Package of 10 non-toxic, antistatic, alcohol and ammonia
free cleaning wipes.
3
6V-R70P-HDSDI Users Guide
Signal Frames per Second Aspect Active Lines Scanning Method Data Rate
525-60i 30/29.97 4:3/16:9 483 Interlaced 270Mb/s
625-50i 25 4:3/16:9 576 Interlaced 270Mb/s
1280x720P 60/59.94/30/29.97/24/23.97 16:9 720 Progressive 1.5Gb/s
1920x1035 60/59.94 4:3/16:9 1035 Interlaced 1.5Gb/s
1920x1080 60/59.94/50 4:3/16:9 1080 Interlaced 1.5Gb/s
1920x1080 30/29.97/25/24/23.97 4:3/16:9 1080 Progressive 1.5Gb/s
TABLE-1 HDSDI/SDI Input BNC Connector Signals

Marshall Electronics
5Electrical Specifications
Display (Viewing Area) 7” (6.14”H × 3.27”V) (156.0mm x 83.28mm)
Viewing Angles 130°H x 120°V
Resolution (RGB Dots) 800H x RGBx480V (1.2 million pixels)
Contrast Ratio 400:1
Color temperature D65 (65000 Kelvin)
Dot Pitch 0.163 mm
Pixel Response 30ms average
Screen Refresh Rate 50/60 Frames per second
Brightness 400 cd/m²
System NTSC/PAL auto recognition via SDI
Inputs HDSDI/SDI with re-clocked output (BNC)
6Mechanical Specification
Dimensions 7.44”W x 5.0”H x 2.5”D (18.89cm x 12.7cm x 6.35cm)
Approx. Weight 3 lbs
Power Consumption 12VDC, 9.6Watt nominal, 3.0Amps max - UL Class 2 (supply included)
7Faceplate Cleaning
When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean
micro fiber clothe, or cheese clothe. Do not use paper towels. Paper towel fibers are coarse and may scratch the sur-
face of the Polycarbonate faceplate. Paper towels may also leave streaks on the surface. Antistatic and fingerprint
resistant cleaning agents are recommended.
V-R70P-HDSDI shown with V-LCD4-MT camera hot shoe mount attached plus rear mount
configuration of V-R65-BA adaptor and IDX-E50S battery
IDX-E50S
V-R70P-HDSDI shown with V-H700P hood attached
4V-R70P-HDSDI Users Guide
1.Unpack the V-R70P-HDSDI and accompanying power supply. Physically inspect for any damage that may have
occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608.
If you are not located within the continental united states call [phone].
2.Connect required cables for signal input and output.
Please note that power must be applied to the V-R70P-HDSDI for the HDSDI/SDI outputs to be activated. All BNC
connectors should be rated for 75Ω.
3. Plug the power supply into the A.C. source
Please note that power can be supplied from a variety of DC sources, such as batteries or Vehicle power. Input
power range is 10.7 to 15 Volt D.C. In operation, the V-R70P-HDSDI will draw approx. 0.8 amp.
Attach twist lock power connection from V-PS12-V-5 power supply to the back of the unit.
4.Turn on the V-R70P-HDSDI by depressing the power switch located on the front of the unit.
8Operational Setup
* Tally lamps active when connected to ground
HDSDI or SDI in.
270Mbs to 1.5Gbs
Automatically terminates to 75Ω
Refer to Table 3 for signal types
Re-Clocked
HDSDI/SDI Output.
Signal in equals
signal out
10.7 to 15 VDC.
V-PS12-V-5 power supply is included
Left Pin - Pos
Right Pin- Neg
Input Connectors
9
5
Pin1- Green
Pin2- Red
Pin3-Amber
Pin4 Gnd -
Pin5-
Pin6-
Pin7-
Pin8-
Pin 9-
Pin10-
Pin11-
Pin12-
Pin13-
Pin14-
Pin15-
Tally IN DB-15 Female