Marshall Electronics VS-WM202-HDSDI User manual

Marshall Electronics
VS-WM202-HDSDI
Heavy Duty Exterior PTZ Camera
20x Zoom and IR LED
User Manual

VS-WM202-HDSDI – V 1.3.0 Page 2 of 48 9/28/12
Copyright © May 2012, Marshall Electronics, Inc.
All Rights Reserved. This document may not be copied.
Trademarks
Other trademarks used in this document are registered trademarks or manufacturer or vendor
trademarks associated with the products.
Disclaimer
Product options and specifications can be changed without notice. The information in this
manual is furnished for informational use only and should not be construed as a commitment
by Marshall Electronics, Inc. Marshall Electronics, Inc. assumes no responsibility or liability for
any errors or inaccuracies that may appear in this publication.
Safety Precaution
Make sure to turn off the power before installing the system.
Do not install under the direct sunlight or in dusty areas.
Make sure to use the product within the temperature and humidity specified.
Do not operate the product in the presence of vibrations or strong magnetic fields.
Do not put electrically conducting materials in the ventilation hole.
Do not open the top cover of the products. It may cause a failure or electric shock on the
components.
To prevent from overheating, make sure to keep the distance at least 10 cm from the ventilation
hole.
Make sure proper voltage before connecting the power.
We appreciate your
IP Camera
Purchase
.
Before installing the product, please read the following with care .

TABLE OF CONTENTS
__________________________________________________
VS-WM202-HDSDI – V 1 .0 Page 3 of 48
1. INFORMATION FOR USER...................................................................................................................................5
1. 1 WARNING. ...............................................................................................................................................5
1. 2 EXPLANATION OF GRAPHICAL SYMBOLS .........................................................................................5
1. 3 FCC COMPLIANCE STATEMENT. .........................................................................................................5
2. PRECAUTIONS. ....................................................................................................................................................6
3. FEATURES. ...........................................................................................................................................................7
4. SETTINGS & INSTALLATION................................................................................................................................8
4. 1 Unpacking ................................................................................................................................................8
4. 2 DIP Switch Settings .................................................................................................................................9
4. 3 Cable Connection ....................................................................................................................................10
4. 3. 1 Basic Diagram of Cable Connection ...........................................................................................10
4. 3. 2 Video Output Connection 2 . ........................................................................................................10
4. 3. 3 RS-485 / RS-422 Communication Connection ...........................................................................10
4. 3. 4 Alarm Connections . .....................................................................................................................10
4. 3. 5 Power Connections .....................................................................................................................10
4. 4 Installation . ...............................................................................................................................................11
4. 5 Basic Configuration. .................................................................................................................................12
5. MAIN SETUP MENU ............................................................................................................................................13
5. 1 Initialize ....................................................................................................................................................13
5. 2 Motion Setting ..........................................................................................................................................13
5. 2. 1 Preset ..........................................................................................................................................13
5. 2. 2 Tour .............................................................................................................................................16
5. 2. 3 Scan ............................................................................................................................................17
5. 2. 4 Pattern. ........................................................................................................................................19
5. 2. 5 Area. ............................................................................................................................................21
5. 2. 6 Alarm ...........................................................................................................................................22
5. 2. 7 Privacy Zone Masking. ................................................................................................................23
5. 3 Dome Setting ...........................................................................................................................................24
5. 3. 1 Set the Dome Camera Title. ........................................................................................................25
5. 3. 2 Set the Power Up Action .............................................................................................................25
5. 3. 2 Park Action . .................................................................................................................................25
5. 3. 4 Display ON/OFF Set ...................................................................................................................26
5. 3. 5 Speed by Zoom ON/OFF Set. .....................................................................................................26
5. 3. 6 Auto Flip ON/OFF Set .................................................................................................................27
5. 3. 7 Factory Set . .................................................................................................................................27
5. 4 Camera Settings ......................................................................................................................................27
9/28/12

VS-WM202-HDSDI – V 1.3.0 Page 4 of 48 9/28/12
5. 4. 1 CAMERA MENU (EH-6300). .......................................................................................................27
5. 4. 1 CAMERA MENU (EH-6300). .......................................................................................................35
5. 5 Clear Settings ..........................................................................................................................................41
5. 6 Special Settings .......................................................................................................................................41
5. 7 PTZ Reset . ...............................................................................................................................................43
5. 8 Other Quick Operation Guide ..................................................................................................................44
6. SPECIFICATIONS. ..............................................................................................................................................44
6. 1 Mechanical Specifications. .......................................................................................................................44
6. 1. 1 MECHANICAL. ............................................................................................................................44
6. 1. 2 ENVIRONMENTAL .....................................................................................................................44
6. 1. 3 FUNCTIONS ...............................................................................................................................44
6. 1. 4 ELECTRICAL ..............................................................................................................................45
6. 1. 5 CERTIFICATES ..........................................................................................................................45
6. 2 Camera Specifications .............................................................................................................................45
6. 2. 1 Zoom Camera .............................................................................................................................45
6. 2. 2 LED Specification . .......................................................................................................................46
7. DIMENSIONS (mm)..............................................................................................................................................47

___________________________________________________________________________
VS-WM202-HDSDI – V 1.3.0 Page 5 of 48 9/28/12
1. INFORMATION FOR USER
1. 1 WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS
THROUGH THE VENTILATION GRILLS OR OTHER OPENINGS ON THE EQUIPMENT.
CAUTION
RISKOF ELECTRIC SHOCK
DONOTOPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
1. 2 EXPLANATION OF GRAPHICAL SYMBOLS
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of un-insulated "dangerous voltage" within
the product's enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
1. 3 FCC COMPLIANCE STATEMENT
FCC INFORMATION - This equipment has been tested and found to comply with limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
1. 4 CE COMPLIANCE STATEMENT
WARNING - This is a CLASS A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
CAUTION - Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
**This installation should be made by a qualified service person and should conform to all
local codes.

___________________________________________________________________________
VS-WM202-HDSDI – V 1.3.0 Page 6 of 48 9/28/12
2. PRECAUTIONS
•Do not install the camera in extreme temperature conditions.
Do use the camera under conditions where temperatures are within -20°C to 60°C (in
continuous operation). Under high temperatures, ensure proper ventilation.
•Do not install or use the camera in an environment where the humidity is high.
It can cause the image quality to be poor.
•Do not install the camera under unstable lighting conditions.
Severe lighting change or flicker can cause the camera to work improperly.
•Never use the camera close to a gas or oil leak.
It can cause malfunctions to occur.
•Do not disassemble the camera.
There are no user-serviceable parts inside it.
•Do not drop the camera or subject them to physical shocks.
It can cause malfunctions to occur.
•Do not allow direct sunlight into the camera.
It can damage CCD.
•Do not expose the camera to rain or spill beverages on it.
If it gets wet, wipe it dry immediately. Liquids can contain minerals that corrode the
electronic components.
•To prevent electric shock and risk of fire hazards.
•Do not use power sources other than that specified.
Note: If the camera is exposed to spotlight or object reflecting the strong light, smear or
blooming may occur. Please check the power whether it satisfies the normal specification
before connecting the camera.

___________________________________________________________________________
VS-WM202-HDSDI – V 1.3.0 Page 7 of 48 9/28/12
3. FEATURES
Outdoor Heavy-Duty PTZ Camera
Heavy-duty aluminum die-cast body makes the VS-WM-202-HDSDI ideal for traffic control,
harbor and airport surveillance, oil fields & refineries, the military & police, sport stadiums, town
& city centers, bus & rail stations and other high security outdoor installations.
Unobstructed 360˚ Rotation and 180 ˚ Flip
Heavy-duty long life slip ring allows for 360˚endless panning and unobstructed 180˚flip.
Light Function
The built-in 30 pcs Super IR LED(Infra-red or white),provides visible distance up to 200m in
the dark. (Osram 870n 1w)
Built-In Fan & Heater
Built-In Wiper System
True Day & Night (ICR Filter Change)
The IR cut filter is when the camera is operating as a color camera for precise color repro-
duction. With ICR, the filter is removed which allows for much greater light sensitivity in mono-
chrome mode.
Break and Clutch Protected Pan and Tilt
OSD (On Screen Display)
The camera IDs, camera preset numbers, preset names, area names, and camera operation
status are displayed on the monitor, allowing set up of various camera functions through the
OSD menu screen.
Auto-Focus 20X Optical Zoom
The built-in 20X optical zoom lens with auto-focus is combined with a 12X digital
zoom(20x), providing a maximum of 240X zoom.
Wide Range Auto Functions
Preset: Up to 255 programmable presets.
Tour: Up to 8 programmable Tours consisting of presets with individual dwell time.
Scan: Repeatedly pan & tilt operating between two positions. (Max.8)
Pattern: Up to 4 programmable Patterns memorizing the PTZ movement.
Privacy: Up to 8 programmable Privacy masking.
Alarm: Move the camera to programmed Preset position with Alarm trigger.(Max.2)
Area: Up to 16 programmable Area display sets.

___________________________________________________________________________
VS-WM202-HDSDI – V 1.3.0 Page 8 of 48 9/28/12
WDR (Wide Dynamic Range)
The Camera delivers clear, high quality pictures even in backlight, by increasing exposure in
dark areas while decreasing it in bright areas a corrected image with clear details results.
Variable Speed Pan/Tilt Control
In manual mode, sophisticated operating is possible at zoom in state by speed correcting
function.
Eco-Friendly Green Energy Product
Minimize power consumption and save the earth by utilizing the VS-WM202 all-in-one
camera system.
4. SETTINGS & INSTALLATION
4. 1 Unpacking
Guiding sticker for installation Manual Detaching Hook
M8 X10 bolts
4PIN Communication Terminal Accessories Switched-Mode Power Supply
L-wrench, alarm cable
M8 wrench-bolt, M8 nut
MAIN CABLE POWER CABLE

___________________________________________________________________________
VS-WM202-HDSDI – V 1.3.0 Page 9 of 48 9/28/12
4. 2 DIP Switch Settings
Before starting up the camera, set the protocol, camera address and details with dip-switches
referring to the following.
Each camera must have a unique address (ID). Identical ID’s on the
same line may damage the control circuit caused by an electric short.

___________________________________________________________________________
VS-WM202-HDSDI – V 1.3.0 Page 10 of 48 9/28/12
4. 3 Cable Connection
4. 3. 1 Basic Diagram of Cable Connection
4. 3. 2 Video Output Connection 2
Connect the video out (BNC) connector to the monitor or HD SDI video input of DVR.
4. 3. 3 RS-485 / RS-422 Communication Connection
It can be remotely controlled by an external device or control system, such as a control
keyboard or DVR, using RS-485 half-duplex, RS-422 duplex or simplex serial communication
signals. After inserting 4pin communication terminal of accessory package to green port of
main cable, connect marked RX+, RX- to TX+ and TX- of the RS-485 control system. If control
system is RS-422, connect TX+,TX- of controller to RX+ and RX- of the camera. And also
connect the TX+, TX- of camera to RX+, RX- of the control device respectively. Total length of
the cable for communication should not exceed 1.2Km.
4. 3. 4 Alarm Connections
It can operate specific motion receiving external Alarm Device (Sensor) signal (Max 2 Alarm.)
Connect the alarm cable to external Alarm Device referring to below, directions.
- Green color line: Ground / Brown & Orange color lines: Alarm 1 & 2.
4. 3. 5 Power Connections
- After connecting above 3 connections (Video/Communication/Alarm), Connect the power
cable last.
- There are 3 lines: Red, Black, Gray. Connect red and black lines to + and - of power. And
connect the gray line for Ground.
- Connect the power of DC 24V, 10A to this camera.
- Use certified Class 2 power supply transformers only.