Marvel CRISIS PROTOCOL CP 178 User manual

Step 1 Step 2 Step 3
Step 4
Step 7 Step 8 Step 9
Step 5 Step 6
CP 178
READ THIS FIRST
Be sure to use a pair of sharp hobby clippers to remove the miniature components from the sprue. Carefully
clean the excess material and mold lines with a sharp hobby knife. Check the t of each part before gluing. Use
a small amount of hobby plastic glue to assemble the components. Use caution with all products and follow all
manufacturer instructions. Adult supervision is recommended for children under the age of 16. Have fun!
JOIN THE COMMUNITY
Use #PaintingProtocol to share your miniature photos and be a part of the Marvel: Crisis Protocol community!
AtomicMassGames AtomicMassGames Atomic_Mass_Transmissions
HYDRA POWER STATION ASSEMBLY GUIDE
Permission granted to print or photocopy for personal use.
Atomic Mass Games and logo are TM of Atomic Mass Games.
Atomic Mass Games, 1995 County Road B2 W, Roseville, MN, 55113, USA, 1-651-639-1905.
Actual components may vary from those shown.
©MARVEL
C01
C02 C03
C14
C11 C09
C10
C07
C08
C12
C13
C15
C16
C06
C17
C18
C04
C05

Step 10 Step 11 Final
HYDRA POWER STATION ASSEMBLY GUIDE (CONTINUED)
Permission granted to print or photocopy for personal use.
Atomic Mass Games and logo are TM of Atomic Mass Games.
Atomic Mass Games, 1995 County Road B2 W, Roseville, MN, 55113, USA, 1-651-639-1905.
Actual components may vary from those shown.
©MARVEL
C19