Date of purchase: _____/ _____/ _____
STANTON 5PCS DINING SET
1
Securely tighten all bolts and nuts.
1
2
3
A Chair Top
B Chair Base
C Cushion
ITEM DESCRIPTION QUANTITY
4
4
4
Da x 4
Bolt
Db x 4
Nut
Product code: D71 M12200
UPC code: 769455 761217
Vendor Item: SC-K-032N/4
Repeat procedures for the remaining three chairs.
Your chairs are now ready for use. Enjoy!
A
B
C
A
B
A
B
Db
Da
Da
Db
C
Repeat procedure for the other side.
Thank you for your purchase
Thank you for your purchase
We are pleased that you have chosen Sears for your outdoor furniture purchase.
We hope that you enjoy the unmatched quality, comfort, and style of your new patio
set. Every piece is meticulously considered all the way down to the smallest details,
exclusively for you, by our world class design team. We know you have a choice when
it comes your patio furniture needs, so from our team to yours, thank you for letting us
be a part of your outdoors.
Table of Contents
Table of Contents.................................... 2
Safety Information................................... 3
Set Up your Furniture Properly..............3
Examine your furniture..........................3
Warranty................................................... 3
Care and Maintenance............................ 4
Pre-Assembly.......................................... 4
Planning Assembly.............................. 4
Observe weight Limits......................... 4
Hardware Included.............................. 4
Assembly Instructions
Package Contents................................. 5
chair........................................................5
Customer Service..................................6
2
Safety Information
SET UP YOUR FURNITURE PROPERLY
Ensure that all parts are assembled properly and fully tightened as per the instructions.
When placing in the desired location, ensure that all legs are resting on the same
surface. You may adjust the legs levelers as required to ensure that the item stands
in a rigid position.
EXAMINE YOUR FURNITURE
Examine occasionally to ensure that there are no loose parts. If loose parts are found,
they must be retightened fully before additional use.
Warranty
WARRANTY
We warrant our products to be free of manufacturing defects to the original purchaser for
the period listed below. We reserve the right to make substitutions with similar merchandise,
if the model in question is no longer in production.
EXCLUSIONS
This warranty does not cover: Furniture used for commercial or non-residential purposes;
failures caused by improper care; unreasonable or abusive use; freeze damage; acts of
nature. Steel products are not covered against rust. Tempered glass table tops are not
covered against breakage.
FINISH
Frame finish is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
FABRIC
Fabric is warranted to be free of manufacturing defects for a period of one (1) year.
Discoloration or fading of the finish as a result of exposure to the elements, chemicals, or
spills is not covered.
FRAMES
Frame is warranted to be free from defects in material or workmanship for a period of
one (1) year for steel frame.
FREIGHT & PACKAGING
Freight and packaging are the responsibility of the original purchaser.
CUSTOMER SERVICE
3
In case of a problem, call
1-800-457-4652
between 9:00 am to 5:00 pm Eastern standard
time Monday through Friday or contact us at www.numarkcustomerservice.com
for
any question or problems you may have.
Care and Maintenance
Pre-Assembly
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
4
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
Wash frames and cushions with a mild solution of soap and water; rinse thoroughly.
Dry completely and drip-dry cushions. Do not use bleach or solvents.
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Chair: 225 lbs
CAUTION: If you overload your
furniture, injuries can occur.
HARDWARE INCLUDED
NOTED: Hardware not shown
to actual size.
Da (16 + 1 spare)
Bolt
De (1)
Assembly
Instructions Sheet
Db (16 + 1 spare)
Nut
Dd (2)
Allen Wrench
Dc (1)
Open Hex Wrench
Safety Information
Do not completely tighten bolts and nuts until indicated in assembly step.
Package Contents
Assembly Instructions
5
Assembly Instructions
Attaching the chair base to the chair top
Attaching the chair base to the chair top
Putting the seat cushion onto the chair
6
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
Made in / Hech en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
For questions or comments about product:
Call toll-free: 1-
800-457-4652
Please refer to part numbers when reordering
between 9:00 am to 5:00 pm Eastern standard time Monday through Friday
or contact us at www.numarkcustomerservice.com
