Master Garden BC-46S User manual

Master Garden Products.
1-800-574-7248
Bamboo Solid Arm Chair. BC-46S
Important Note: Do Not tighten the bolts until you have all of them in place. Use the Pre-
Drilled holes and hand tighten to hold its place.
1. Verify you have received all required pieces of your Bamboo Arm Chair. BC-46S comes
with six (6) chair components, eight (8) screws, and one (1) tightening tool.
2. Now place side 1 on the ground with the side with 4 larger holes facing up. Side 1 is
indicated with a number 1. Next take the leg supports and match their numbers up. Be
sure to get the bamboo knobs on the supports to go into the holes on side 1.

3. Next, fit the seat and back pieces into the holes by matching the numbers. Note: you
may have to force the knobs into the holes by movement or by a rubber mallet.
4. Finally take the final side and work the knobs into the holes on side 2. Take 4 screws
and place them in the 4 holes along the side. Hand tighten them until they hold. Note:
Be Sure to Use the Pre-Drilled Holes! Now carefully flip the chair onto the other side. If
side 1 falls off, do what you did with side 2, work the knobs into the holes on side 1.
Take the last 4 screws and hand tighten them in just like you did on side 2. Now that you
have all screws in, go back and tighten them the rest of the way creating a secure hold.
If done properly it should look like this.
Thank you for your Business!
If you have any questions please call us at: 1-800-574-7248