Master Tailgaters MR-10-M2DVR4 User manual
USER MANUAL
Serial No.: 2020YV0960114
9.66” 1080P Streaming Media Mirror Monitor
With Built-in Dash Cam
CAUTIONS:
1. Please format the card before power on, otherwise video errors and freezes will occur during video playback. Please
use a high-speed TF card. If a low-speed card is used, problems are likely to occur.
4. About touch buttons: When two touch areas are touched at the same time, the touch buttons will malfunction
temporarily. Function resumes after 15 seconds.
2. You can view the video through the mirror. Or you can connect to the mobile APP to view through the mobile phone.
3. WiFI account: YV09-XXXXXX, Password: 12345678
Note: For the best performance and durability of video recording, we recommend to use C10 U1 level TF card or
better.
NG
Class 4 Class 10 Class U1
OK GOOD
Class U3
This manual is only for your reference, please check the actual product as the standard!
2
PACKAGE
SPECIFICATIONS
FEATURES
1
Front recording 1080P
Rear recording 1080P
9.66 inch full display screen
Touch screen button
Wi-Fi connection
Parking mode
Time lapses video
Night mode
LCD power save
G-sensor
Super Capacitor
Real-time view on app
IP67 waterproof rear camera
Back up camera display
SD card (MAX 64GB)
9.66 inch MIPI IPS, 1280*320
DDR3 1GB
MSC8339D
Solution
Flash
Display Screen
Front 1400/ rear 1200
Recording Angle
H.264, MOV
Video Format
Memory
0-10m
Support
Wi-Fi
Video Resolution Front 1080P / rear 1080P
Super Capacitor
Supporting platform RTK
Operation Temperature -200C-700C
Storage Temperature -200C-700C
Working Voltage 10-16V
Language English,Traditional Chinese, ..
The package contains the following:
01 Rear view mirror 02 Wire harness 03 Rear canera
04 User manual 05 Accessories
06 SD card (optional)
For the items listed above, please check your packing contents. If any damage, please contact the distributor
or the agent as soon as possible.
BASIC OPERATING INSTRUCTIONS
3 4
6: Video switch button ( available to use after connecting rear camera)
5: Short press to adjust the screen display range; Long press to take photo
7: Lock the current video when recording;
1: short press to turn on/ off the screen; Long press to turn off the mirror, then short press to restart
2: Light sensor 3: Indicator 4:
8: Short press to enter the “menu setting” interface when stop recording
9: Night mode icon;
stop recording; start recording;
Enter the “playback” interface when stop recording;
10: Parking monitoring icon; 11: G-sensor icon;
Black to GND
Red to ignition +12V
Yellow to battery
Rear camera
To reversing light
(If do not connect with this line, the mirror screen will
not switch to the rear view when reversing)
HOW TO WIRE
08:00
SAT
2019.07.17
0:00:54
2456 7 813
91011 Follow this direction to insert the SD card.
Touch area
NOTED: The touch area of the keys is not on the glass screen, but on the plastic frame below the key icon.
When wiring, please align the two white
arrows shown in the picture, otherwise,
the wire interface may be damaged.
5 6
HOW TO INSTALL MIRROR MONITOR
Remove the original mirror
Car factory original mirror The plate on the windshield
CAUTION!
NOTE: Always use caution, DO NOT force the mount. We will not be responsible for broken windshields. If you
are not sure how to remove or re-install the mirror seek trained, qualified help.
Dangerous Ok
Windshield
Windshield
Dangerous Ok
1. 2.
Different cars have different brackets. It depends
on your vehicle maker and manufacturer.There are
many methods to remove the original rear view
mirror, however, please don’t force the mirror off
the bracket.
The manufacturer will not be responsible for
damage caused to your car by wrong installation of
the mirror.
Install mirror monitor on the plate
Install rear view mirror along this directionTake down your original mirror, and make
the mirror monitor ready
windshield
Please make sure to install the mirror to
the end of the bottom without any loose
Contrarotate the xed rear view mirror
Torque is about 0.8-1.3 N.m
windshield
windshield
6
7 8
ReturnPrevious Next Conrm/ Back to previous
Stop recording, tap the icon “ ” in the main interface to proceed to the menu settings.
MENU SETTINGS
Movie Clip Time:
Can set “
1min / 3min/ 5min”.Default 3 minutes.
Night Mode: Can set “on / off”. When the light is dark at night, turn on this function to increase the sensitivity of the lens and take
brighter and higher-quality videos.
Movie Mode FHD 30fps
HD 30fps
Movie Clip Time
Night Mode
Sound Record
15:30
TUE
2019.12.03
Movie Mode: Can set “
FHD30 / HD30”.
This setting is only for the front camera, not useful for the rear camera.
Sound Record: Can set“on / off”. Default On.
Video Time Lapse:
Can set “
Off / 1FPS / 4FPS”.
Timelapse Rec Time: Can set “2 hours /8 hours /12 hours /24 hours”. Default 2 hours.In “Video Time Lapse option”, select “1FPS” or
“4FPS”. When the car is turned off and the machine is in the ACC disconnected state, the machine will prompt to enter the “Timelapse
Rec Time”video. When the voltage reaches 11.3±0.15V setting, the machine will stop recording automatically to avoid car engine can’t
start properly because of low voltage. When playing a video, it turns a long video of slow motion into a short video of fast motion, similar
to fast forward playback in movies. For example, when recording for 1 minute, the video is compressed to 1 second, and the recording
for 1 hour is changed to 1 minute to play.
Exposure -2
-1
1
2
0
Video Time Lapse
Timelapse Rec Time
Protect Level
15:30
TUE
2019.12.03
Exposure: Can set “
-2 / -1/ 0 / 1 /2”. The default is 0. This setting is only for the front camera, not useful for the rear camera.
Protect Level (G-sensor):Can set “Off / High / Middle / Low”.
With G-sensor function, dash camera can automatically save the video as event le when it detects acceleration of gravity changes
greatly. For example, when car crash happens. The event le will be locked and cannot be overwritten in record cycle mode. It can only
be manually deleted one by one or formatted.
9 10
Clock Settings: Users can adjust the time and date by themselves, or connect the mirror to the phone via WIFI, the time will be updated
automatically.
Flicker: Can set “50Hz / 60Hz”.
Each country has different supply frequency due to geographical reason. Standard frequency of dash camera lens is constant 50Hz.
When the supply frequency inconsistent with frequency standard the image on the device will appear joggling phenomenon. At this
point users should adjust Frequency to consistent with supply frequency.
Reset Setup: After making a lot of custom settings,users can reset the device to the original factory settings.
Format SD-Card: If it’s not necessary to save the videos in card, user can delate all videos (both normal video and event les) by
formatting.
Parking Monitoring: Can set “Off /On”.
When this function is turned on, when the recorder is shaken when it is turned off, it will start the machine to record for 30 seconds and
then turn it off.
Language:
“
English / Simplied Chinese / Traditional Chinese”etc. There are 8 languages.
LCD Power Save: Can set “off / 1min / 3mins”.
After exiting the menu, the mirror will start to count the time once there are no operations. The screen will auto turn off when it reaches
the time you set.
Parking Monitoring Off
On
LCD Power Save
Language
Volume
15:30
TUE
2019.12.03
Volume:
Can set “
Off / High / Middle / Low”, default Middle.
Flicker 50 Hz
60 Hz
Clock Settings
Wifi ON/OFF
Format SD-Card
15:30
TUE
2019.12.03
Wifi ON/OFF: Can set “On / Off”.
11 12
Stop recording, tap the icon “ ” in the main interface to proceed to the playback interface. There are 6 sub-menus.
They are: 1. Front-view normal video; 2. Rear-view normal video; 3. Front-view locked video; 4. Rear-view locked
video; 5. Front-view picture; 6. Rear-view picture.
Press “ ” to switch to “Rear View Normal Video”, as shown in the gure below:
Press “ ” to select, as shown in the gure below:
PLAYBACK
FILE191205-131524-000365R
FILE191205-132138-000366R
FILE191205-151022-000367R
FILE191205-152247-000368R
15:30
THU
2019.12.05
F
R
F
R
[1/18] [00:03:00]
Return
Previous Next Select
FILE191205-131524-000365R
FILE191205-132138-000366R
FILE191205-151022-000367R
FILE191205-152247-000368R
15:30
THU
2019.12.05
F
R
F
R
[1/18] [00:03:00]
ReturnPrevious Next Conrm
Lock the
selected video
ReturnPrevious video Next video Play
Lock the
current video
2/18 00:00:03 /00:00:28
FILE191205-132138-000366R.MOV
PS: Press and hold “ ” to delete the current video.
Press “ ” to select and enter the playback interface, as shown below:
13 14
Built- in WiFi module system allows to connect mobile
phone through Android or IOS APP, please check below
for its setup.
1. Download “ RoadCam” APP.
2. Turn on the rearview mirror, stop recording, tap the
icon “ ” in the main interface to proceed to the menu
settings. Find “Wi ON/OFF” by “ ” and “ ” buttons.
Press “ ” to choose “ON”. as shown in Figure 1.
3. The WiFi account and password are displayed in the
lower right corner of the screen, as shown in Figure 2.
MOBILE PHONE APP CONNECTION and OPERATION
3. Enter mobile phone interface, turn on Wi-Fi and
connect Wi-Fi ID, enter initial password: 12345678,
then connect. Please see gure 3
08:00
SAT
2019.07.17
YV09_208125
12345678
Figure 2
Figure 4
Figure 2
Figure 1
5. In Figure 4, click the “ ” icon, the phone and
rearview mirror are successfully connected, as shown
in Figure 5.
Flicker On
Off
Clock Settings
Wifi ON/OFF
Format SD-Card
Click “ ” to enter the list of recorded videos, Press and hold the le thumbnail to select the le, download the video to the local,
delete videos in batches, etc. See the gure below.
6. Once connected, user can check the recording video and operate accordingly.
Figure 5
Setting
Record
Photo
Image les
Disconnect
Recorded les
Switch
DeleteDownload to local album
15 16
Table of contents
