Master EWS 115 User manual

EWS 115
EWS 125
EWS 125-E
Bedienungsanleitung
Operating Instructions
Istruzioni d’uso
Notice d’utilisation
Instrucciones para el manejo
Instruções de utilização
Gebruiksaanwijzing
Betjeningsvejledning
Bruksanvisning
Käyttöohje
Bruksanvisning
Οδηγίες χειρισµού
Kullanım kılavuzu
Instrukcja obs∆ugi
Kezelési Utasítás
Návod k obsluze
Návod na obsluhu
Instrucøiuni de utilizare
Navodila za uporabo
Ръководство на потребителя
Kasutusjuhend
Vartojimo informacijà
EkspluatÇcijas instrukcija
Руководство по эксплуатации
EWS 115-125.book Seite 1 Freitag, 10. September 2004 11:43 11
All manuals and user guides at all-guides.com
all-guides.com

6
1
3
4
1
2
5
6
7
8
9
10*
11**
12
13*
14*
15*
16*
18*
13*
17**
EWS 115-125.book Seite 3 Freitag, 10. September 2004 11:43 11
All manuals and user guides at all-guides.com

10
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions con-
tained therein are strictly followed.
In addition, the general safety in-
structions in the enclosed booklet
must be followed.
If the mains cable is damaged or cut
through while working, do not touch
the cable but immediately pull the
mains plug. Never use the machine
with a damaged cable.
Wear protective goggles, ear protec-
tion and a dust protection mask.
Wear protective gloves and sturdy
shoes. When necessary, also wear an
apron.
When working with the machine, al-
ways hold it firmly with both hands
and provide for a secure stance.
❏For all work with the machine, the auxiliary han-
dle 4 must be mounted.
❏For work with roughing or cutting discs, the protec-
tive guard 8 must be mounted. For work with the
rubber sanding plate 14 or with the cup
brush 18/disc brush/flap disc, mounting the hand
protector 13 (optional extra) is recommended.
❏Observe the manufacturer’s instructions for mount-
ing and using grinding tools.
❏Use only grinding tools with a permissible speed at
least as high as the no-load speed of the machine.
❏Check grinding tools before use. The grinding tool
must be properly mounted and turn freely. Perform
a test run for at least 30 seconds without load. Do
not use damaged, out-of-round or vibrating grind-
ing tools.
❏Pay attention to the dimensions of the grinding
disc. The mounting hole diameter must fit the
mounting flange 9 without play. Do not use reduc-
er pieces or adapters.
❏Protect the grinding tool from impact, shock and
grease.
❏The machine must be used only for dry cut-
ting/grinding.
❏Use a vacuum cleaner for drawing off the dust
when working with stone and wear a dust mask.
The vacuum cleaner must be approved for mason-
ry dust. When cutting stone, use the cutting guide.
❏Do not work with materials containing asbestos.
❏Do not clamp the machine in a vice.
❏Always direct the cable to the rear away from the
machine.
❏Insert the mains plug only when the machine is
switched off.
❏Apply the machine to the workpiece only when
switched on.
❏Keep hands away from rotating grinding tools.
❏Be careful of hidden electrical lines or gas and wa-
ter pipes. Check the working area, e. g. with a
metal detector.
❏Be careful when cutting grooves, e. g. in load-car-
rying walls: See information on structures.
❏When grinding metal, flying sparks are produced.
Take care that no persons are endangered. Due to
danger of fire, no combustible materials should be
located in the vicinity (spark flight zone).
❏Pay attention to the direction of rotation. Always
hold the machine so that sparks and grinding dust
fly away from the body.
❏Blocking the cutting disc leads to jerking reaction
forces on the machine. In this case switch off the
machine immediately.
❏Caution! The grinding tool runs on after the ma-
chine is switched off.
❏Never use cutting discs for rough grinding. Do not
exert any lateral pressure on the cutting discs.
❏Always switch off the machine and allow to come
to a stop before placing it down.
❏For mains failure or when the main plug is pulled,
unlock the On/Off switch immediately and turn it
to the off position. This prevents uncontrolled re-
starting.
❏Connect machines that are used in the open via a
residual current device (RCD) with an actuating
current of 30 mA maximum. Use only extension
cables that are approved for outdoor use.
❏Do not drill into housing or attach rivets in order to
mark the machine. The double insulation is then no
longer ensured. Use stickers.
❏Use only original Würth parts and accessories.
For Your Safety
GB
☞For further notes on safety refer to the enclosed sheet.
EWS 115-125.book Seite 10 Freitag, 10. September 2004 11:43 11
All manuals and user guides at all-guides.com

11
Tool Specifications
Machine Elements
1 Ventilation slots
2 Speed selector thumbwheel
3 On/Off switch
4 Auxiliary handle
5 Spindle lock
6 Grinder spindle
7 Clamping lever
8 Protective guard
9 Mounting flange with O-ring
10 Roughing/cutting disc*
11 Clamping nut**
12 Face spanner
13 Hand protector*
14 Rubber sanding plate*
15 Sanding sheet*
16 Round nut*
17 Quick clamping nut**
18 Cup brush*
* Optional accessories
**depends on design
Not all of the accessories illustrated or described are included
as standard delivery.
Intended Use
The machine is intended for cutting, roughing and
brushing metal and stone materials without using water.
For cutting stone, a cutting guide is required.
For machines with electronic control: With approved
sanding tools, the machine can be used for sanding and
polishing.
For damage caused by usage other then intended, the
user is responsible.
Information Structures
Slots in load carrying walls are subject to the Standard
DIN 1053, Part 1 or country-specific regulations.
These regulations are to be observed under all circum-
stances. Before beginning work, consult the responsible
structural engineer, architects or the construction super-
visor.
Mounting the Protective
Devices
❏Before any work on the machine itself, pull the
mains plug.
Protective Guard
❏For work with roughing or cutting discs, the protec-
tive guard 8 must be mounted.
Open the clamping lever 7.
Place the protective guard 8 with
coded cams into the respectively
coded grooves on the spindle col-
lar of the machine head and turn
anti-clockwise to the required po-
sition (working position).
To fasten the protection guard 8,
close the clamping lever 7.
The closed side of the protection
guard 8 must always point to the
operator.
Note: Coded notches on the protective guard 8 ensure
that only a protective guard that fits the machine type
can be mounted.
Angle Grinder EWS 115 EWS 125 EWS 125-E
Article number 702 480 X 702 482 X 702 484 X
Rated input 750 W 1 020 W 1 020 W
Output power 450 W 600 W 600 W
No-load speed 11 000 RPM 11 000 RPM 2 800 - 11 000 RPM
Grinding disk dia. max. 115 mm max. 125 mm max. 125 mm
Grinder spindle threads M 14 M 14 M 14
Starting current limiter – • •
Constant electronics – • •
Speed selection – – •
Weight approx. 1.55 kg approx. 1.60 kg approx. 1.60 kg
Safety class / II / II / II
8
7
EWS 115-125.book Seite 11 Freitag, 10. September 2004 11:43 11
All manuals and user guides at all-guides.com

12
Auxiliary Handle
❏For all work with the machine, the auxiliary han-
dle 4 must be mounted.
Screw the auxiliary handle 4 on the right or left of the
machine head depending on the working method.
Hand Protector (Optional extra)
For work with the rubber sanding plate 14 or with the
cup brush 18/disc brush/flap disc, mounting the hand
protector 13 (optional extra) is recommended. The
hand protector 13 is fastened with the auxiliary han-
dle 4.
Approved Grinding Tools
The permissible speed [RPM] or the circumferential
speed [m/s] of the grinding tools used must be at least
in accordance with the values given in the table.
Therefore, always observe the permissible rotation-
al/circumferential speed on the label of the grinding
tool.
Mounting the Grinding Tools
(Optional Accessories)
Before any work on the machine itself, pull the mains
plug.
Use only grinding tools with a permissible
speed at least as high as the no-load speed of
the machine.
Roughing and cutting discs become very hot while
working; do not touch until they have cooled.
❏Clean the grinder spindle and all parts to be mount-
ed. For clamping and loosening the grinding tools,
lock the grinder spindle 6 with the spindle locking
button 5.
Actuate the spindle locking button 5 only when the
grinder spindle is at a standstill!
Roughing/Cutting Disk
The hole of the roughing/cutting disk must fit on the
centring shoulder of the mounting flange 9 without
play. Do not use reducer pieces or adapters.
When using a diamond cutting disk, take care that the
direction of rotation arrow on the diamond cutting disk
and the direction of rotation of the machine (direction of
rotation arrow on the machine head) agree.
For mounting, see the illustration page.
Screw on the clamping nut 11 and tighten with the
two-hole spanner (see Section “Quick Clamping Nut”).
An O-ring (plastic part) is insert-
ed in the retainer flange 9
around the spigot.
If the O-ring is missing or is
damaged, it must in all cases be
replaced before the retainer
flange 9 is mounted.
☞After mounting the grinding tool and before
switching on, check that the grinding tool is cor-
rectly mounted and that it can turn freely.
Flap disc
Remove the protective guard 8 and mount the hand
protector 13. Place the mounting flange 9 (accessory)
and the flap disc onto the grinding spindle 6. Screw on
the clamping nut 11 and tighten with the face spanner.
Rubber Sanding Plate 14
Remove the protective guard 8 and mount the hand
protector 13. For mounting, see the illustration page.
Screw on the round nut 16 and tighten with the
two-hole spanner.
Cup Brush 18/Disc brush
Remove the protective guard 8 and mount the hand
protector 13.
The grinding tool must be able to be screwed onto the
grinding spindle 6 until it rests firmly against the grinder
spindle flange at the end of the grinder spindle threads.
Tighten with an open-ended spanner.
max.
[mm] [mm]
Dbd[RPM] [m/s]
115
125 6 622.2 22.2 11 000 11 000 80 80
125 – – 11 000 80
75 30 M 14 11 000 45
b
d
D
D
D
b
d
9
EWS 115-125.book Seite 12 Freitag, 10. September 2004 11:43 11
All manuals and user guides at all-guides.com

13
Quick Clamping Nut
Use only for roughing- and cutting discs upto
150 mm Ø.
After assembly of the mounting flange and the rough-
ing-/cutting disc, the free length of the grinding-spindle
thread “X” must be at least 4 mm.
Fold up the locking shackle of the quick clamping nut
and screw the quick clamping nut onto the locked grind-
ing spindle by hand in clockwise direction, until it sits
tight on the roughing-/cutting disc. Fold back the lock-
ing shackle again.
To release the roughing-/cutting disc, fold up the locking
shackle and unscrew the quick clamping nut by hand in
counterclockwise direction with the grinding spindle
locked. If necessary, the quick clamping nut can also be
loosened with the fitting face spanner. The two holes for
the face spanner are located under the locking shackle.
Initial Operation
Check for correct mains voltage: The voltage of the
power source must agree with the voltage specified on
the nameplate of the machine.
Switching On and Off
Switching on: Slide the On/Off switch 3 forward.
Switching off: Release the On/Off switch 3.
Locking: Slide the On/Off switch 3 forward and
press down to the front until it latches.
Switching off: Press down the On/Off switch 3 to the
rear - the switch springs to the off posi-
tion.
Starting Current Limiting (EWS 125/125-E)
As a result of soft starting, a 13-A fuse is adequate.
Constant Electronics (EWS 125/125-E)
The constant speed electronics hold the speed at
no-load and when under load nearly constant and en-
sure uniform working performance.
Speed Selection (EWS 125 E)
Select the required speed with the thumb wheel 2 ac-
cording to the Table (guideline).
Material Application Thumbwheel
Plastic Polishing 1
Finish polishing 1
Metal Finish grinding 1
Removing paint 2 - 3
Wood, Metal Brushing,
Removing rust 3
Metal, Stone Grinding 4 - 6
Metal Roughing 6
Stone* Cutting* 6
* Cutting of stone is permitted only with the cutting guide
(optional extra).
Operating Instructions
❏Clamp the workpiece if it does not remain station-
ary due to its own weight.
❏Do not load the machine so heavily that it comes to
a standstill.
❏Roughing and cutting discs become very hot while
working; do not touch until they have cooled.
Rough Grinding
With an approach angle of 30° to 40°,
the best roughing results can be
achieved. Move the machine back and
forth with moderate pressure. In this
manner, the work piece will not become
too hot, does not discolour and no ridg-
es are formed.
Never use a cutting disc for roughing.
Flap disc
With the flap disc (optional extra), curved surfaces and
profiles (contour sanding) can be worked.
Flap discs have a considerably higher service life than
sanding sheets, lower noise level and lower sanding
temperatures.
Cutting
When cutting, do not press, tilt or oscil-
late. Work with moderate advancing
that is adapted to the material being
worked.
Do not brake coasting cutting disks with
side pressure.
X
EWS 115-125.book Seite 13 Freitag, 10. September 2004 11:43 11
All manuals and user guides at all-guides.com
all-guides.com

14
Important is the direc-
tion in which cutting is
performed.
The machine must al-
ways work opposite to
the direction of rotation.
Therefore, never move
the machine in the other
direction! Otherwise,
the danger exists of it
being pushed uncon-
trolled out of the cut.
Cutting Stone
❏The machine must be used only for dry cut-
ting/grinding.
It is best to work with a
diamond cutting disc. To
ensure against tilting,
the cutting guide with
special protective vacu-
uming hood must be
used.
The machine must be operated only with dust extrac-
tion. Suitable vacs are available from Würth. In addi-
tion, wear a dust mask.
Switch on the machine
and place the front part
of the cutting guide on
the workpiece.
Slide the machine with
moderate advancing
that is adapted to the
material to be worked
(Figure).
For cutting especially hard material, e. g., concrete with
high gravel content, the diamond cutting disc can over-
heat and become damaged as a result. This is indicated
clearly by a ring of sparks that rotates with the diamond
cutting disc.
In this case, interrupt the cutting process and allow the
diamond cutting disc to cool by running frely at no-load
speed for a short time.
Noticeable decreasing work progress and a rotating
spark ring are indications of a diamond cutting disc that
has become dull. With brief cuts in an abrasive material
(e. g., chalky sand stone), it can be sharpened again.
Rotating the Machine Head
❏Before any work on the machine itself, pull the
mains plug.
The machine head can
be rotated with respect
to the machine housing
in 90° steps. In this
manner, the on/off
switch can be brought to
an advantageous han-
dling position for spe-
cial working situations,
e. g., for cutting work
with the cutting guide/
cut-off stand (optional
extra) or for left-handed
persons.
Unscrew completely the four screws.
Rotate the machine head carefully and without remov-
ing from the housing to the new position.
Screw in the screws again and tighten.
Maintenance and Cleaning
❏Before any work on the machine itself, pull the
mains plug.
☞For safe and proper working, always keep the
machine and the ventilation slots clean.
In extreme working conditions, conductive dust
can accumulate in the interior of the machine
when working with metal. The protective insula-
tion of the machine can be degraded. The use of a sta-
tionary extraction system is recommended in such cases
as well as frequently blowing out the ventilation slots
and installing a residual current device (RCD).
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorized customer service agent
for Würth power tools.
For all correspondence and spare parts orders,
always include the article number on the type plate
of the machine.
For the current spare parts list of this machine, log
into the Internet under “http://www.wuerth.com/
partsmanager” or ask for a copy at your nearest
Würth branch office.
EWS 115-125.book Seite 14 Freitag, 10. September 2004 11:43 11
All manuals and user guides at all-guides.com

15
Warranty
For this Würth tool, we provide a warranty in ac-
cordance with statutory/country-specific regulations
from the date of purchase (proof of purchase by in-
voice or delivery note). Damage that has occurred
will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can be recognised only when the tool is pre-
sented undisassembled to a Würth branch office or
a Würth field service employee.
Environmental Protection
Recycle raw materials instead of
disposing as waste
The machine, accessories and
packaging should be sorted for
environmental-friendly recycling.
The plastic components are labelled for categorized
recycling.
Noise/Vibration Information
Measured values determined according to EN 50 144.
Typically the A-weighted noise levels of the product are:
sound pressure level: 88 dB (A);
sound power level: 101 dB (A).
Wear ear protection!
The typical weighted acceleration is 5,0 m/s2.
Declaration of Conformity
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardisation documents: EN 50 144, EN 55 014,
EN 61 000-3-2, EN 61 000-3-3, according to the pro-
visions of the directives 89/336/EEC, 98/37/EC.
04
Adolf Würth GmbH & Co. KG
M. Wölfle R. Bauer
Subject to change without notice
EWS 115-125.book Seite 15 Freitag, 10. September 2004 11:43 11
All manuals and user guides at all-guides.com

Würth
worldwide:
Würth Albania Ltd.
Rr. Asim Vokshi
Pall 49/1 Ap. 9
AL-Tirana
Albania
Tel. ++355/42/29748
Fax. ++355/42/29748
[email protected]
Würth Armenia Co. Ltd.
63 Tigran Mets Ave.
AM-375005 Yerevan
Armenia
Tel. ++3741/559970
Fax. ++3741/559972
[email protected]
Würth Handelsges.m.b.H.
Würth Strasse 1
AT-3071 Böheimkirchen
Austria
Tel. ++43/2743/70700
Fax. ++43/2743/70703333
[email protected]
Würth Australia Pty Ltd
4 Redwood Drive
AU-Dingley VIC 3172
Australia
Tel. ++61/3/95517244
Fax. ++61/3/95512994
[email protected]
Wurth Aztur Ltd
Mir Galal Str.63.
AZ-370134 Baku
Azerbaijan
Tel. ++994/12/601934
Fax. ++994/12/601934
[email protected]
Wurth BH d.j.l.
Dzemal Biedia 162
BA-71000 Sarajevo,BIH
Bosnia
Tel. ++387/33/461770
Fax. ++387/33/461825
Würth Belux N.V.
Everdongenlaan 29
BE-2300 Turnhout
Belgium
Tel. ++32/14/445566
Fax. ++32/14/423077
[email protected]
Wuerth Bulgaria EOOD
Iskarsko Chaussee Boul. 12
BG-1592 Sofia
Bulgaria
Tel. ++359/2/9659955
Fax. ++359/2/9659966
[email protected]
Würth Belarus Ltd.
Botanitscheskaja Str. 5a-603
BY-220038 Minsk
Belarus
Tel. ++375/172/363919
Fax. ++375/172/852512
[email protected]
Würth AG
Dornwydenweg 11
CH-4144 Arlesheim
Switzerland
Tel. ++41/61/7059111
Fax. ++41/61/7059494
[email protected]
Würth Guangzhou
International Trading Co., Ltd.
Room 601, North Tower,
Nantian Building,
3 Jiangong Road
Tianhe High and New
Technology
Industry Development Zone
CN-510665 Guangzhou
China
Tel. ++86/20/85552840
Fax. ++86/20/855550245
[email protected].
cn
Würth Hong Kong Co. Ltd.
Unit B 6/f Prince Ind Bidg
106 King Fuk St.,
San Po Kong, Kowloon
CN-Hong Kong
China
Tel. ++8/52/27508118
Fax. ++8/52/27530084
[email protected]
Wuerth China-Shanghai
Langsheng Trading Co., Ltd.
2nd Floor (West)
No. 18 Factory Site
No. 481 Gui Ping Road
CN-200233 Shanghai
China
Tel. ++86/21/64951418
Fax. ++86/21/64848610
[email protected]
Würth Tianjin International
Trade Co., Ltd.
Jie Fang Nan Lu Str. 518-1
CN-300221 Tianjin
China
Tel. ++86/22/88242263
Fax. ++86/22/88243813
[email protected]
Wuerth Cyprus LTD
Strovolos industrial estate
P.O. Box 8899
CY-2083 Nicosia
Cyprus
Tel. ++357/2/512086
Fax. ++357/2/512091
[email protected]
Würth, spol. s r.o.
Sazecská 2
CZ-10800 Praha 10
Czech Republic
Tel. ++420/2/72106111
Fax. ++420/2/72106119
[email protected]
Adolf Würth GmbH
& Co. KG
Postfach
D-74650 Künzelsau
Reinhold-Würth-Str. 12-16
DE-74653 Künzelsau
Germany
Tel. ++49/7940/15/0
Fax. ++49/7940/15/1000
[email protected]
Würth Danmark A/S
Montagevej 6
DK-6000 Kolding
Denmark
Tel. ++45/79/323232
Fax. ++45/75/517250
Würth Estonia AS
Liimi 3 A
EE-10621 Tallinn
Estonia
Tel. ++372/6563509
Fax. ++372/6563494
[email protected]
Würth Egypt for Trading
S.A.E.
27th. Km Alexandria Cairo
Desert Road, Behind Mercedes
EG-Amriya Alexandria
Egypt
Tel. ++2/03/4700432
Fax. ++2/03/4700432
[email protected]
Würth España S.A.
Poligono Riera de Caldes
Carrer Dels Joiers 21-23
ES-08184 Palau de Plegamans
Barcelona
Spain
Tel. ++34/93/8629500
Fax. ++34/93/8646203
[email protected]
Würth Oy
Herajoki
FI-11710 Riihimäki
Finland
Tel. ++358/19/7701
Fax. ++358/19/729010
Würth France S.A.
Z.I. Ouest
Rue Georges Besse
FR-67158 Erstein Cedex
France
Tel. ++33/3/88645300
Fax. ++33/3/88646200
Wurth U.K. Ltd.
1 Centurion Way
Erith
GB-Kent DA 18 4 AE
Great Britain
Tel. ++44/208/3196000
Fax. ++44/208/3196400
[email protected]
Würth Georgia Ltd.
Marshal Gelovani Avenue 36
GE-380059 Tbilisi
Georgia
Tel. ++995/32/530610
Fax. ++995/32/250610
[email protected]
Würth Hellas S.A.
23. Klm. National Road
Athens-Lamia
145 68 Krioneri Attikis
P.O. Box 51877
Attikis
GR-145 02 Agios Stefanos
Attikis
Greece
Tel. ++30/1/6290800
Fax. ++30/1/8134756
[email protected]
Würth- Hrvatska d.o.o.
Franje Lucica 23/III
HR-10000 Zagreb
Croatia
Tel. ++385/1/3498784
Fax. ++385/1/3498783
[email protected]
Würth Szereléstechnika KFT
Gyár utca 2
HU-2040 Budaörs
Hungary
Tel. ++36/23/418130
Fax. ++36/23/421777
[email protected]
PT Wuerth Indah
JI. Meruya Ilir Raya No. 82 A-B
ID-Jakarta 11360
Indonesia
Tel. ++62/21/5860036
Fax. ++62/21/5861043
[email protected]
Würth Ireland Ltd.
Monaclinoe Industrial Estate
Ballysimon Road
IR-Limerick
Ireland
Tel. ++353/61/412911
Fax. ++353/61/412428
Würth Israel Ltd.
Alon Hatavor 2
Zone 1
IL-Caesarea Industrial Park
P.O. Box 3585
IL-Caesarea Industrial Park
Zip 38900
Israel
Tel. ++972/4/6273939
Fax. ++972/4/6270999
Wuerth India Pvt. Ltd.
33, Santosh Building,
Marol Co-operative Industrial
Estate,
M V Road, Andheri (East)
IN-Mumbai 400 059
India
Tel. ++91/22/8507023
Fax. ++91/22/8507020
[email protected]
Würth Teheran Ltd.
Pasdaran St.-Corner of
Negarestane 5-No.183
IR-16619 Teheran-Iran
Iran
Tel. ++98/21/2842828
Fax. ++98/21/2856171
[email protected]
Würth á Íslandi ehf.
Veslurhraun 5
IS-210 Gar
∂ abær
Iceland
Tel. ++354/5302000
Fax. ++354/5302001
[email protected]
Würth S.r.l. - GmbH
Via Stazione, 51
I - 39044 Egna (BZ)
Tel. ++39/0471/828 111
Fax. ++39/0471/828 600
[email protected]
Wurth-Jordan Co. Ltd.
Al-yadoudeh
P.O. Box 951
JO-Amman-11592
Jordan
Tel. ++962/6/4122512
Fax. ++962/6/4122510
[email protected]
Würth Japan Co., Ltd.
MT Building
33 Sanmaicho, Kanagawa-ku
JP-Yokohama 221-0862
Japan
Tel. ++81/45/4884186
Fax. ++81/45/4884187
[email protected]
[email protected]
Würth Nippon GmbH
& Co. KG
6F Tsuruga Bldg., 1-29-15
Shinyokohama, Kohoku-Ku
JP-Yokohama 222-0033
Japan
Tel. ++81/45/4704633
Fax. ++81/45/4704621
[email protected]
Wuerth Kenya Ltd.
P.O. BOX 16751
Meru Road
KE-Mombasa
Kenya
Tel. ++254/11/312403
Fax. ++254/11/312437
[email protected]
Würth Foreign Swiss
Company Ltd.
3 Erkindik Boulevard
KG-Bishkek, 720040
Kyrgyzstan
Tel. ++996/312/227976
Fax. ++996/312/661025
[email protected]
Würth Kosova
No. 36 Pashe Dibra
Bregu i diellit
Prishtina
Tel. ++377/44/186514
[email protected]
Wurth Korea Co. Ltd.
128-1, O-Keum Dong,
KR-Song Pa-Gu, Seoul, Korea
(138-859)
South Korea
Tel. ++82/2/4009311
Fax. ++82/2/4009315
[email protected]
Wuerth Kazakhstan Ltd.
Abai 125, 2nd floor
KZ-480008, Almaty
Kazakhstan
Tel. ++7/3272/622432
Fax. ++7/3272/622495
[email protected]
Würth Lietuva
Dariaus ir Gireno 21
LT-2038 Vilnius
Lithuania
Tel. ++370/2/263045
Fax. ++370/2/264108
[email protected]
Würth Reinsurance
Company, S.A.
B.P. 2217
L-1022 Luxembourg
Siège social
65, Avenue de la gare
LU-1611 Luxembourg
Tel. ++352/494177
Fax. ++352/494188
Würth Maroc SARL
48 Avenue Pasteur
MA-Casablanca 20150
Marocco
Tel. ++212/2/2405700
Fax. ++212/2/2405706
Würth Moldova Ltd.
b-dul Stefan cel Mare, nr 4
Hotel National
MD-Chisinau
Moldavia
Tel. ++373/2/540398
Fax. ++373/2/540398
Würth Makedonien GmbH
ul. Gorce Petrov 108a
MK-91000 Skopje
Macedonia
Tel. ++389/233/2230
Fax. ++389/233/2083
[email protected]
Würth Caraibes Sarl
Z.I. Cocotte Canal
MQ-97224 Ducos-Martinique
Tel. ++596/560701
Fax. ++596/564369
[email protected]
Würth Limited
Würth House
Triq il- Masgar
MT-Qormi QRM09
Malta
Tel. ++356/494604
Fax. ++356/441081
[email protected]
Wuerth (Malaysia) Sdn.
Bhd.
6, Jalan Permas 9/13
Taman Permas Jaya
MY-81750 Masai Johor
Malaysia
Tel. ++60/7/3876280
++60/7/3881712
Fax. ++60/7/3884391
[email protected]
Würth Nederland B.V.
Moeskampweg 13
NL-5222 AW 's-Hertogenbosch
Postbus 344
NL-5201 AH 's-Hertogenbosch
Netherlands
Tel. ++31/73/6291911
Fax. ++31/73/613137
[email protected]
Würth Norge AS
Postboks 84
NO-1483 Skytta
Morteveien 12, Gjellerasen
Naeringspark
NO-1481 Hagan
Tel. ++47/670/62500
Fax. ++47/670/62711
[email protected]
Würth New Zealand Ltd.
42 Hobill Avenue,
P.O. Box 97079
Manukau City
NZ-South Auckland/Mail
Centre
New Zealand
Tel. ++64/9/2623040
Fax. ++64/9/2623030
[email protected]
Wuerth Philippines, Inc.
Air-Rich Building
Km. 19.5 East Service Road,
South Expressway
PH-Parañaque City,
Philippines
Tel. ++63/2/8382697
Fax. ++63/2/8382195
[email protected]
Würth Polska Sp. z o.o.
ul. Plochinska 33
PL-03-044 Warzawa
Poland
Tel. ++48/22/819041
Fax. ++48/22/8117190
[email protected]
Würth Portugal Tecnica
de Montagem, Ldo.
Estrada Nacional, 249-4
Abrunheira
P-2710-089 Sintra
Portugal
Tel. ++351/21/9157200
Fax. ++351/21/9151038
[email protected]
Würth Romania S.R.L.
Zapada Mielior 16-18
Sector 1
P.O. 18-85
RO-Bucarest 71529
Romania
Tel. ++40/1/2323282
Fax. ++40/1/2328933
[email protected]
Wuerth Mittelrussland
c/o Logovaz
Transportnaja Ul. 20
RU-394043 Voronezh
Russia
Tel. ++7/0732/727065
Fax. ++7/0732/727065
[email protected]
Würth Irtysch
Ul. Dobrovolskogo 8/1
RU-644099 Omsk
Russia
Tel. ++7/3812/245291
Fax. ++7/3812/245291
[email protected]
Würth Russia
Bulwar Generala
Karbyschewa, 8, Of.504
RU-123154 Moskau
Russia
Tel. ++7/095/9468028
Fax. ++7/095/9468028
[email protected]
Würth Nordkaukasus Ltd.
Krasnoarmejskaja Str. 206
RU-344010 Rostow am Don
Russia
Tel. ++7/8632/618051
Fax. ++7/8632/618054
[email protected]
ZAO Wuerth-Siberia
Serebrennikovskaja, 14, of. 501
RU-630007 Novosibirsk
Russia
Tel. ++7/3832/234673
Fax. ++7/3832/234673
[email protected]
Würth St. Petersburg
Prospekt Dunaiski 68
RU-192 288 St. Petersburg
Russia
Tel. ++7/812/1726166
Fax. ++7/812/1726085
[email protected]
ZAO Wuerth-Ural
Institutskaja, 6, of. 202
RU-620016 Ekaterinburg
Russia
Tel. ++7/3432/432393
Fax. ++7/3432/432393
[email protected]
ZAO Wuerth-Volga
Novosadovaja st., 221, of. 205
RU-443011 Samara
Russia
Tel. ++7/8462/703252
Fax. ++7/8462/703252
[email protected]
Würth Svenska AB
Würth´s väg
Hjälmarberget
Box 1705
SE-70117 Örebro
Sweden
Tel. ++46/19/351000
Fax. ++46/19/351001
Würth Singapore Pte. Ltd.
Bukit Batok central Post Office
P.O. box 365
SG-Singapore 916513
Tel. ++65/487/4238
Fax. Box 1705
Würth d.o.o.
Plemljeva 86
SI-1210 Ljubljana
Slovenia
Tel. ++386/1/5128690
Fax. ++386/1/5121472
[email protected]
Würth s.r.o.
Pribylinská ul. c. 2
SK-83104 Bratislava
Slovakia
Tel. ++421/7/49201211
Fax. ++421/7/49201299
[email protected]
Wuerth Verbindungs-
technik Co., Ltd.
41/198 Sukhontasawad Road
TH-Ladprao Bangkok 10230
Thailand
Tel. ++66/2/9078880
Fax. ++66/2/9078877
[email protected]
Würth Otomotiv ve Montaj
San. Ürün. Paz. Ltd. Sti.
Eski Silivri Caddesi No. 22
TR-34900 Mimarsinan
Büyükcekmece
Turkey
Tel. ++90/212/8634603
Fax. ++90/212/8634608
[email protected]
Wurth Taiwan, Co., Ltd.
4th Fl., 28 Lane 80,
Sec. 3 Nan-Kang Rd.,
TW-Taipei, Taiwan, R.O.C.
Taiwan
Tel. ++886/2/27857122
Fax. ++886/2/27857027
[email protected]
Würth Ukraine Ltd.
Maschynobudiwna, 44
UA-Kiew 03680
Ukraine
Tel. ++380/44/4465376
Fax. ++380/44/4466467
[email protected]
Würth Central Purchasing
America, Inc.
91 Grant Street
US-Ramsey, NJ 07446
USA
Tel. ++1/201/9951111
Fax. ++1/201/9959908
Würth Technik
Halklar Dustligi 132-1
UZ-706800 Nawoi
Uzbekistan
Tel. ++998/79/2235207
Fax. ++998/79/2235207
[email protected]
Cong ty TNHH Vu Viet
9/3 Ly Van Phuc-
Tan Dinh Ward- Dist 1
VN- Ho Chi Minh City
Vietnam
Tel. ++84/8/8205635
Fax. ++84/8/8205634
[email protected]
Wurth d.o.o. za trgovinu
montaznom opremom
Zrenjaninski put 153 h
YU-11211 Beograd
Yugoslavia
Tel. ++381/11/3320198
Fax. ++381/11/3320242
[email protected]
Würth South Africa Co (Pty)
Ltd.
P.O. Box 616
ZA-Isando 1600
South Africa
Tel. ++27/11/9747191
Fax. ++27/11/9746169
[email protected]
For more countries and information see
http://www.wuerth.com
EWS 115 - 125 - Adressen Seite 0 Montag, 13. September 2004 1:40 13
All manuals and user guides at all-guides.com

Nieder-
lassungen:
Aachen
Jülicher Straße 236-248
52070 Aachen
Telefon [phone]
Telefax (02 41) 5 68 79 50
[email protected]
Aalen
Robert-Bosch-Straße 47
73431 Aalen
Telefon [phone]
Telefax (0 73 61) 92 30 50
[email protected]
Augsburg
Flotowstraße 15
86368 Gersthofen
Telefon [phone]
Telefax (08 21) 2 97 61 50
[email protected]
Backnang
Gewerbegeb. Backnang-Süd
Beim Erlenwäldchen 8
71522 Backnang
Telefon [phone]
Telefax (0 71 91) 90 40 50
[email protected]
Bad Mergentheim
Industriepark Würth, Gebäude 1
97980 Bad Mergentheim
Telefon [phone]
Telefax (0 79 31) 92 40 59
nl.bad-
[email protected]
Bamberg
Biegenhofstraße 24
96103 Hallstadt
Telefon [phone]
Telefax (09 51) 7 00 84 50
[email protected]
Bayreuth
Hasenweg 6
95448 Bayreuth
Telefon [phone]
Telefax (09 21) 7 92 05 50
[email protected]
Berlin-Charlottenburg
Spandauer Damm 60-64
14059 Berlin
Telefon [phone]
Telefax (0 30) 32 67 83 51
nl.berlin-charlottenburg
@wuerth.com
Berlin-
Hohenschönhausen
Grenzgrabenstraße 4
13053 Berlin
Telefon [phone]
Telefax (0 30) 98 60 01 55
nl.berlin-hohenschoenhausen
@wuerth.com
Berlin-Reinickendorf
Osramhöfe
Seestraße/Oudenarderstraße 16
13347 Berlin
Telefon [phone]
Telefax (0 30) 45 08 27 53
nl.berlin-
[email protected]
Biberach
Riss-Center
Riss-Straße 19
88400 Biberach
Telefon [phone]
Telefax (0 73 51) 5 87 98 50
[email protected]
Bielefeld
Obere Hillegosser Str. 37
33699 Bielefeld
Telefon [phone]
Telefax (05 21) 9 24 18 27
[email protected]
Bochum
Harpener Feld 27
44805 Bochum
Telefon [phone]
Telefax (02 34) 9 55 43 50
[email protected]
Böblingen
Hanns-Klemm-Straße 46
71034 Böblingen-Hulb
Telefon [phone]
Telefax (0 70 31) 2 11 76 50
[email protected]
Braunschweig
Hansestraße 66
38112 Braunschweig
Telefon [phone]
Telefax (05 31) 3 54 78 90
[email protected]
Bremen
Gewerbegebiet Bayernstraße
Straubinger Straße 11
28219 Bremen
Telefon [phone]
Telefax (04 21) 3 99 88 51
[email protected]
Chemnitz
Gewerbegebiet
Südring/Neefestraße
Carl-Hamel-Straße 5
09116 Chemnitz
Telefon [phone]
Telefax (03 71) 2 71 47 50
[email protected]
Cottbus
Gewerbegebiet
An der Reichsbahn
Am Gleis 15
03042 Cottbus-Sandow
Telefon [phone]
Telefax (03 55) 7 56 61 50
[email protected]
Crailsheim
Industriegebiet Zur Flügelau
Roßfelder Straße 60
74564 Crailsheim
Telefon [phone]
Telefax (0 79 51) 96 37 50
[email protected]
Darmstadt
Weiterstadt Park
Brunnenweg 19
64331 Weiterstadt
Telefon [phone]
Telefax (0 61 50) 18 18 50
[email protected]
Dortmund
Wilhelmstraße 35A
59439 Holzwickede
Telefon [phone]
Telefax (0 23 01) 91 26 50
[email protected]
Dresden-Löbtau
Malterstraße 37
01159 Dresden
Telefon [phone]
Telefax (03 51) 4 38 47-50
[email protected]
Dresden-Mickten
Marie-Curie-Straße 6
01139 Dresden
Telefon [phone]
Telefax (03 51) 4 14 53-50
[email protected]
Düsseldorf
Lierenfelder Straße 53
40231 Düsseldorf
Postfach 105532
40046 Düsseldorf
Telefon [phone]
Telefax (02 11) 9 73 06 50
[email protected]
Erfurt
Über dem Feldgarten 11
99198 Erfurt-Linderbach
Telefon [phone]
Telefax (03 61) 4 20 57 50
[email protected]
Essen
Heinz-Bäcker-Straße 15
45356 Essen
Telefon [phone]
Telefax (02 01) 8 66 45 50
[email protected]
Esslingen
Plochinger Straße 45
73779 Deizisau
Telefon [phone]
Telefax (0 71 53) 92 94 50
[email protected]
Frankfurt
Weiskirchen, Gewerbegeb. Ost
Daimlerstraße 19
63110 Rodgau
Telefon [phone]
Telefax (0 61 06) 84 01 50
[email protected]
Frankfurt II
Hanauer Landstraße 338
60314 Frankfurt/Main
Telefon [phone]
Telefax (0 69) 42 69 38 50
[email protected]
Freiburg
Industriegebiet Nord
Mitscherlichstraße 5
79108 Freiburg
Telefon [phone]
Telefax (07 61) 5 59 66 50
[email protected]
Gera
Gewerbegebiet Bieblach Ost
Heinrich-Hertz-Straße 14
07552 Gera
Telefon [phone]
Telefax (03 65) 4 37 28 50
[email protected]
Gießen
Gewerbegebiet Gießen-West
Robert-Bosch-Straße 16
35398 Gießen
Telefon [phone]
Telefax (06 41) 9 62 36 50
[email protected]
Göppingen
Industriegebiet Ost
Heilbronner Straße 12
73037 Göppingen
Telefon [phone]
Telefax (0 71 61) 6 89 00
[email protected]
Goslar
Gewerbegebiet Bassgeige
Alte Heerstraße 15
38644 Goslar
Telefon [phone]
Telefax (0 53 21) 3 51 93 50
[email protected]
Halle (Saale)
Delitzscher Straße 70
06112 Halle (Saale)
Telefon [phone]
Telefax (03 45) 5 75 56 54
[email protected]
Hamburg
Industriegebiet Nettelkrögen
Gutenbergring 44
22848 Norderstedt
Telefon [phone]
Telefax (0 40) 53 43 61 50
[email protected]
Hamburg-Süd
Helmspark Hittfeld
Helmsweg 6-16
21218 Seevetal-Hittfeld
Telefon [phone]
Telefax (0 41 05) 58 44 50
[email protected]
Hannover
Gewerbegebiet Godshorn
Bayernstraße 37
30855 Langenhagen-Godshorn
Telefon [phone]
Telefax (05 11) 7 86 80 50
[email protected]
Heidelberg
Gewerbegebiet Rohrbach-Süd
Redtenbacher Straße 1/1
69126 Heidelberg
Telefon [phone]
Telefax (0 62 21) 5 89 88 50
[email protected]
Heilbronn
Dieselstraße 8
74076 Heilbronn
Telefon [phone]
Telefax (0 71 31) 95 56 50
[email protected]
Ingolstadt
Eriagstraße 8
85053 Ingolstadt
Telefon [phone]
Telefax (08 41) 9 31 87 51
[email protected]
Jena
Löbstedter Straße 80
07749 Jena
Telefon [phone]
Telefax (0 36 41) 45 12 50
[email protected]
Karlsruhe
Printzstraße 2a
76139 Karlsruhe
Handwerk Holz:
Telefon [phone]
Telefax (07 21) 6 25 22 50
[email protected]
Kassel
Industriegebiet Waldau West
Otto-Hahn-Straße 18
34123 Kassel
Telefon [phone]
Telefax (05 61) 9 98 68 50
[email protected]
Kempten
Messerschmittstraße 16
87437 Kempten
Telefon [phone]
Telefax (08 31) 5 74 48 50
[email protected]
Kiel
Seekoppelweg 7a
24113 Kiel
Telefon [phone]
Telefax (04 31) 6 47 40 50
[email protected]
Koblenz
Auf dem Hahnenberg 51
56218 Mülheim-Kärlich
Telefon [phone]
Telefax (0 26 30) 94 70 50
[email protected]
Köln
Köhlstraße 43
50827 Köln-Ossendorf
Telefon [phone]
Telefax (02 21) 95 64 42 50
(08 00) 8 65 13 90
[email protected]
Künzelsau-Gaisbach
Verkaufsniederlassung
Schliffenstraße 22
74653 Gaisbach
Telefon [phone]
Telefax (0 79 40) 15 45 55
[email protected]
Landshut
Sonnenring 17a
84032 Altdorf
Telefon [phone]
Telefax (08 71) 9 53 71 50
[email protected]
LE Stetten
Industriegebiet Stetten
Sielminger Straße 65
70771 LE-Stetten
Telefon [phone]
Telefax (07 11) 22 06 29 50
nl.leinfelden-echterdingen
@wuerth.com
Leipzig
Zum Bahnhof 20
04178 Leipzig/Rückmarsdorf
Telefon [phone]
Telefax (03 41) 4 90 14 40
[email protected]
Würth Service-Container
Am Airport 2000
Postfach 1244
04029 Leipzig
Telefon [phone]
Telefax (03 41) 2 24 19 77
Funk (01 70) 6 33 70 73
[email protected]
Leonberg
Hertichstraße 10
71229 Leonberg-Eltingen
Telefon [phone]
Telefax (0 71 52) 9 28 24 29
[email protected]
Lübeck
Taschenmacherstraße 10
23556 Lübeck (Roggenhorst-
Nord)
Telefon [phone]
Telefax (04 51) 8 71 92 50
[email protected]
Magdeburg
Silberbergweg 29
39128 Magdeburg
Telefon [phone]
Telefax (03 91) 2 55 87 50
[email protected]
Mainz
Carl-Zeiss-Straße 13
55129 Mainz-Hechtsheim
Telefon [phone]
Telefax (0 61 31) 6 27 39 50
Mannheim
Fraunhoferstraße 7
68309 Mannheim
Telefon [phone]
Telefax (06 21) 7 27 46 50
[email protected]
Minden
Ringstraße 49-51
32427 Minden
Telefon [phone]
Telefax (05 71) 3 98 38 53
[email protected]
Mönchengladbach
Gewerbegebiet Engelbleck
Borsigstraße 13
41066 Mönchengladbach
Telefon [phone]
Telefax (0 21 61) 4 77 69 50
(08 00) 7 24 16 70
[email protected]
om
München
Am Lenzenfleck 2
85737 Ismaning
Telefon [phone]
Telefax (0 89) 96 07 03 50
nl.muenchen-
[email protected]
München 2
Ridlerstraße 65
80339 München
Telefon [phone]
Telefax (0 89) 43 19 72 50
[email protected]
Münster
Harkortstraße 11
48163 Münster
Telefon [phone]
Telefax (02 51) 2 65 37 50
[email protected]
Neubrandenburg
Gneisstraße 8
17036 Neubrandenburg
Telefon [phone]
Telefax (03 95) 4 30 48 50
[email protected]
Nordhausen
Freiherr-vom-Stein-Straße 30c
99734 Nordhausen
Telefon [phone]
Telefax (0 36 31) 47 89 50
[email protected]
Nürnberg
Lenkersheimer Straße 10a
90431 Nürnberg
Telefon [phone]
Telefax (09 11) 9 31 92 50
[email protected]
Offenburg
Robert-Bosch-Straße 2
77656 Offenburg-Elgersweier
Telefon [phone]
Telefax (07 81) 9 69 84 50
[email protected]
Oldenburg
Ammerländer Heerstaße 246
26129 Oldenburg
Telefon [phone]
Telefax (04 41) 2 19 89 50
[email protected]
Osnabrück
Hettlicher Masch 12
49084 Osnabrück
Telefon [phone]
Telefax (05 41) 9 09 01 50
[email protected]
Paderborn
Frankfurter Weg 70-72
33106 Paderborn
Telefon [phone]
Telefax (0 52 51) 8 73 67 50
[email protected]
Papenburg
Siemensstraße 22-24
26871 Papenburg
Telefon [phone]
Telefax (0 49 61) 66 87 50
[email protected]
Passau
Regensburger Straße 14
94036 Passau
Telefon [phone]
Telefax (08 51) 9 56 62 50
[email protected]
Pforzheim
Gewerbegebiet
Wilferdinger Höhe
Rastatter Straße 36
75179 Pforzheim
Telefon [phone]
Telefax (0 72 31) 56 87 99
[email protected]
Potsdam
Am Verkehrshof 1
14478 Potsdam
Telefon [phone]
Telefax (03 31) 8 88 84 50
[email protected]
Regensburg
Franz-Hartl-Straße 4
93053 Regensburg
Telefon [phone]
Telefax (09 41) 7 83 98 50
[email protected]
Reutlingen
Industriegebiet West
Ferdinand-Lassalle-Straße 55
72770 Reutlingen
Telefon [phone]
Telefax (0 71 21) 56 95 50
[email protected]
Rhein-Sieg
Redcarstraße 2b
53842 Troisdorf-Spich
Telefon [phone]
Telefax (0 22 41) 2 34 02 50
[email protected]
Rodgau
siehe bei Frankfurt/Main
Rosenheim
Isarstraße 1A
83026 Rosenheim
Telefon [phone]
Telefax (0 80 31) 2 30 89 50
[email protected]
Rostock
Gewerbegebiet
Neu-Roggentiner-Straße 4
18184 Roggentin
Telefon [phone]
Telefax (03 82 04) 6 16 50
[email protected]
Saarbrücken
Im Rotfeld 21
66115 Saarbrücken
Telefon [phone]
Telefax (06 81) 9 48 65-50
[email protected]
Schwäbisch Hall
Industriegebiet Hessental-Ost
Schmollerstraße 41
74523 Schwäbisch Hall
Telefon [phone]
Telefax (07 91) 4 07 23 50
[email protected]
Siegen
(Kaan-Marienborn)
Hauptstraße 84
57074 Siegen
Telefon [phone]
Telefax (02 71) 6 60 49 29
[email protected]
Sinsheim
In der Au 22
74889 Sinsheim
Telefon [phone]
Telefax (0 72 61) 40 21 50
[email protected]
Stuttgart
Kölner Straße 10
Hallschlag
70376 Stuttgart
Telefon [phone]
Telefax (07 11) 9 55 73 50
[email protected]
Trier
Ohmstraße 6-8
54292 Trier
Telefon [phone]
Telefax (06 51) 4 36 99 50
[email protected]
Ulm/Neu-Ulm
Carl-Zeiss-Straße 3
89231 Neu-Ulm
Telefon [phone]
Telefax (07 31) 9 78 98 50
[email protected]
Urbach
Schorndorfer Straße 22
73660 Urbach
Telefon [phone]
Telefax (0 71 81) 48 86 56
[email protected]
Villingen-Schwenningen
Industriegebiet Vockenhausen
Heinrich-Hertz-Straße 9
78052 VS-Villingen
Telefon [phone]
Telefax (0 77 21) 87 19 50
nl.villingen-schwenningen
@wuerth.com
Weingarten/Ravensburg
Hähnlehofstraße 5
88250 Weingarten
Telefon [phone]
Telefax (07 51) 5 61 04 50
nl.weingarten-ravensburg
@wuerth.com
Weißenburg
Dettenheimer Straße 11
91781 Weißenburg
Telefon [phone]
Telefax (0 91 41) 99 55 50
[email protected]
Wiesbaden
Hagenauer Straße 17-19
65203 Wiesbaden
Telefon [phone]
Telefax (06 11) 1 86 97 50
[email protected]
Wuppertal
Industriegebiet
Nächstebreck
Möddinghofe 21
42279 Wuppertal
Telefon [phone]
Telefax (02 02) 6 47 71 25
[email protected]
Würzburg
Gewerbegebiet Ost
Sandäcker 11
97076 Würzburg
Telefon [phone]
Telefax (09 31) 2 79 89 18
[email protected]
Adolf Würth GmbH & Co. KG
Postfach · 74650 Künzelsau · Telefon [phone] · Telefax (0 79 40) 15 10 00
Internet: http://www.wuerth.com · e-mail: [email protected]
0702 480 X BA 0409
- Printed in Germany - Imprimé en Allemagne MWV-OSW-09/04 • © by Adolf Würth & Co. KG • Nachdruck, auch auszugsweise, nur mit Genehmigung.
1 609 929 H24
EWS 115 - 125 - Adressen Seite 1 Montag, 13. September 2004 1:40 13
All manuals and user guides at all-guides.com