Masterbuilt 20042011 Guide

MASTERB,UILT
ASSEMBLY, CARE & USE MANUAL
WARNING & SAFETY INFORMATION
MODEL: 20042011 BARREL GRILL
THIS PRODUCT IS FOR OUTDOOR USE ONLY
q-
_o
o
8
/
/
Tools required for assembly: Adjustable Wrench, Phillips Head Screwdriver.
WARN,NO
CARBON MONOXIDE HAZARD
, ,,,,
Burning charcoalgivesoffcarbon
_n--dn=b_ideT_liic h-h-a=s-n-o-o-dovand =can....
cause death,
DO NOT burn charcoal inside homes,
vehicles, tents, garages or any enclosed
areas.
Use only outdoors where it is weg
ventilated,
--information-necessary-forthe=proper-and-=
safe use of this grill.
Read and follow all warnings and
instructions before using grill and
during use.
Keep it for future reference.
Failure to fo'l[ow these warnings and instructions properly cou'id' resu]t in fire or explosion, Which could cause
property damage, personal injury, or de,ath.

GENERAL WARNING AND SAFETY INFORMATION
• Keep a fire extinguisher accessible at all times while operating grill.
•Never leave grill unattended while in use.
• Never usa inside an enclosed area such as a patio, garage, building or tent.
• Never use inside a vehlsle, not even e recreational vehicle such as a motorhome, camper_ or truck bed.
•Never operate this grill under any overhead construction such as roof coverings, carports, awnings or overhangs.
• Maintain a minimum distance of 10 ft. (3m) from all structures.
• Keep area clear of all combustible materials such as wood, dry plants, grass, brush, paper or canvas.
• Never operate this grill within 25 ft. (7.Sin) of flammable liquids.
• Never operate this grill within 10 ft. (3m) of a gas cylinder.
• Never use this grill as a heater (READ CARBON MONOXIDE HAZARD}.
• Use thls grill only on a stable, level surface to prevent tipping.
• Use on non-combustible surfaces such as dirt, concrete, brick or rock,
• Keep children and pets away from grill at all times. Do not allow children to use grill.
• Only use charcoal lighting fluid. Never usa gasoline, aIaohol or other highly volatile fluids to ignite charcoal.
These fluids can explode causing injury or death.
•GrilI is HOT whlle in use and Will remain HOT for a period of time afterwards. Do not touch any part of the grill
without wearing protective gloves.
• Never move grill when in use. Allow gdII to cool complateIy before moving or storing.
•Never leave HOT coals or ashes unattended.
•DOnot stem grill with HOT ashes or charcoal inside grill. Store only when fire is completely out and all surfaces
are cold,
, Dispose of cold ashes by placing them in aluminum foil, soaking with w_ter and discarding in a non-combustible
container,
• Accessory attachments not supplied by Mastarbuilt Outdoor Products© are not recommended.
• Never use this product for anything other than its intended purpose, This grill is not for commercial use.
tA]_WayS=usethi_=grj!L|f!_ccqrdafice wjtl}.alI qpglicpbI=e !opaJ_ state and federal fire codas.
Combustion by-product produced when using this product contains
chemicals known to the State of California to cause birth defects,
other reproductive harm. or cancer.
The materials used in this product may contain lead a chemical known to the State of
California to cause birth defects and other reproductive harm.

iTEMNO, QUANTITYDESCRIPTION
1 1 Grill Lid
2 2 Cooking Grate
3 1 Charcoal Grate ,.
4I Gdll Body
5 2 _Air Damper
62Leg Connector
72 Leg Bracket
8 2 Short Axle Leg
9 2 Long Stationary Leg
10 1 Storage Shelf
11 t Axle
12 2Wheel
13 2 Side Shelf Bracket
14 1 rSide Shelf
15 1Smoke Stack
....=16-............. t ..... Gdll Lid Handle
(with Retainer Clip)

BLIS_EI_P_CK CONTENTS
(A)
M6x45
Phillips Head Screw
qty-14
(F)
MBx12
PhilIips Head Screw
qty-g
(G)
M6
Cardage Bolt
qty-2
Hex Flange Nut
qty-18
(H)
Axle Cap
qty*2
(c) (D) {') (e)
M6 M6 M6 Cotter Clip
Lock Washer Flat Vfasher Lock Nut qty-2
........ q__-2.................... _q_t_2 .qty-2=....................................................................
J

DO NOT RETURN TO RETAILER
For Assembly Assistance, Mlssln9 or Damaged Parts
Call: MASTERBUILT Customer Service at 1+800-489-1581
ITEM NO. DESCRIPTION
9904100045 Lid Kit
9904100046 GrJI| Body Kit
9904100029 Smoke Stack Kit
9904,!,00047__ Side Shelf Kit
9904100048 Axle Leg Kit
9904100049 Stationary Leg Kit
9904100050 Leg Connector Tube Kit
9904100051 Leg Bracket Kit
9904100052 Side SheLf Support Kit
9904100053 Axle Kit
9904100054 Wheel Kit
9904090029 Lid Handte Kit
990050018 Air Damper Kit
9904100056 Temperature Gauge Kit
9004100077 Lower Shelf (no Hardware)
9004100075 Axle Caps
9004100080 Charcoal Grate
9904100043 Hardware Bag
9804100061 Instruction Manual + English

Before assembly read
instructions carefully.
This unit is heavy. Do not
assemble without assistance.
Tools needed for assembly:
Adjustable Wrench
Philiips Head Screwdriver
Assemble griI] on aclean, fiat
surface.
CAUTION: Use caution during the
assembly process.
Some components are heavy.
STEP 1.
Pay close attention to when assem-
bling grill legs, Right legs are
shorter to accommodate wheels.
Insert fight short leg (8) and left long
stationaryleg (9) into leg connector
(6) as shown.
Repeat step 1 to assemble second set
of legs.
STEP 2.
Steps 2_3 require assistance. Get a
helper!
Inser_ storage shelf ('t0) into holes of
assembled grilt legs as shown.
STORAGE SHELF
INSERTION HOLE

STEP3.
Atta¢._ Ieg bracket (7) to right short
legs (8) as shown using phimps hea6
screws (A) and he× flange nuts (B).
Repeat step 3 on opposite side.
Do not fully tighten screws at this
time,
STEP 4.
Insert axle (11) through holeson
short right legs (8), Slide wheel (12)
onto axle end secure usingcotter clip
(E), Snap axle cap (H) ontoend of
wheel assemblyas shown.
Repeat step on opposite side for
remaining wheel.
Do not fully tighten screws at this
time.

STEP 5,
Place grill body (4) ontoassembled
legs wi_h holes for grittlid to the back.
_ghtIy secure grill body to leg connec-
tors (6) using phillips head screws (A)
and hex flange nuts (B),
Do not fully tighten screws at this
time.
Carefufly reposltion grill as shown,
STEP 6.
Note: Do not over tighten, Air
damper should move freely,
Attach air damper (5) to body (4)
using phiUips head screw (F) and
lock nut (I) as shown.
Repeat step on opposite end.

STEP 7.
Note: Position brackets so sharper
angled ends are used to connect
to leg connector.
Attach side shelf support brackets
(13) to side she(f (t4) using phii_ips
head screws (F).
Do not fu!ly tighten at this time.
STEP 8.
Align holes on assembled side shelf
(14) with holes on gri)l body (4) and leg
connector (6) as shown.
Insert phillips head screw (F) through
holes on body (4) into side shelf (t4),
Secure using hex flange nuts (B).
Attach sheJf suppozt brackets (13) to
top hofes in leg connector (6) as shown
in illustration and Fig, A, using phillips
head screws (A). Secure using hex
flange nuts (B).
Tighten all hardware at this time,

STEP 9.
Step 9 requires assistance,
Get a helped
Align gdll lid (1) with gr_iI body (4) as
shown, Secure grill lid (t) to grill body
(4) using can'iage bolt (G).
Repeat step on opposite end,
STEP 10.
Insert temperature gauge (17}
through slotted hole in grill lid (1),
Secure by turning temperature guage
(17) and lock into place with retainer
dng.