Matheo MSI 221 User manual
1
MSI 221
A
B
C
D
E
F
G
H
I
J
K
L
M
N
A
B
C
DEFG
H
I
NM
L
K
J
2
•
•
•
•
•
•
•
•
•
•
•
•
3
•
•
•
•
•
MAX•
•
••
•••
4
•
•
Burst
•
OFF
•
•
highheat
•
•
•
•
5
•
MAX•
•
•
•
•
English
MSI 221
Dear customer!
Thanks for your worthful choce and confdence to Matheo
brand. We really hope that you enjoy operatng ths product.
Important safegards
Voltage/Frequency: 230V/50Hz
Power: 2200W
For household use only
Before operating this iron, please read this instruction manualcarefully
Please read this instruction manual carefully and familiarize yourself with your
new steam iron. Before using the rst time, please retain this manual for future
reference.
A. Spray Nozzle
B.Water lling inlet
C.Steam control dial
D. Burst of steam button
E.Spray Button
F. Temperature control dial
G.Up cover
H. Power cord protector
I.Rear cover
J. Body
K.Skirt
L. Self clean button
M. Water tank
N. soleplate
1
A
B
C
DEFG
H
I
NM
L
K
J
Know your steam station iron
Important safeguards
2
• When using your iron, basic safety precautions should always be
followed:
• Make sure the power used corresponds with the one indicated on the
rating label.
• Use the iron only for needed use as descried in the instruction manual.
• Close supervision is necessary when any appliance is used near children.
Do not leave iron unattended while connected or on an ironing board.
Burns can occur from touching hot metal parts, hot water or steam.
• Keep the iron out of reach of children.
• The iron should never be left unattended while it is connected to the
mains supply mains.
• The plug must be removed from the sock-outlet before the water
reservoir is lled with water.
• Unplug the iron from the mains electrical supply before:
1) Cleaning
2) Filling with water or emptying the water tank
3) Immediately after use
• Never operate the iron with damaged power cord or plug, or after it
has fallen or been damaged in any way. To avoid the risk of electric
shock, do not disassemble the iron, take it to a qualied serviceman for
examination and repair.
• Do not let cord touch hot surfaces.
• To protect against a risk of electric hazards, do not immerse the iron in
water or any other liquid.
• The iron must be used and rested on a stable surface.
• When placing the iron on its stand, ensure that the surface on which the
stand is placed is stable.
• The iron is not to be used if it has been dropped, if there are visible signs
of damage or if it is leaking.
• This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by
children without supervision.
• keep the iron and its cord out of reach of children less than 8 years of
age when it is energized or cooling down.
Before rst use
Filling with water
Setting temperature
3
• It is normal for small amount of smoke to be produced the rst time,this
will quickly disappear.
• When using the steam function for the rst time, do not direct the steam
towards the laundry, as there could be debris from the steam vents.
• We recommend the use of distilled water.
• Make sure that both the Steam Control turning Knob and Temperature
Control Dial are in “OFF”position.
• Hold the iron upright so that the water-lling inlet is in a horizontal
position.
• Fill with water throughWater Filling Inlet until the water reach the“MAX”
mark indicated on the side of the iron, and never ll above this mark.
• Follow the ironing instructions on the garment label. If there is no
instruction but you do know the kind of fabric, please consult the
following table.
• Note: If the fabric consists of various kinds of fabrics, always select the
temperature required by the most delicate fabrics.
Fabric Temperature control Temperautre requirement
Silk ●Low temperature
wool ●● Medium temperature
Cotton,
linen ●●● High temperature
Steam ironing
• Place the iron in a vertical position and set the temperature control dial
at the minimum/low heat setting.
• Insert the plug into the socket, and then turn the temperature control
dial to the “high heat” marking. The pilot light will come on, indicating
that the iron is heating up.
• When the pilot light turns o, the set temperature has been reached
and the iron is ready to use.
• During ironing,the pilot light on the iron automatically switches on/
o as the thermostat maintains the set temperature(you may continue
ironing during this process).
• Turn the steam control turning knob to the required position.
• Steam is produced as soon as the iron in held horizontally.
• SPRAYING
• Press the spray button to spray water on clothes, as often as required.
• Note: When using the water spray function, ensure that there is enough
water in the water tank, and you may have to pump the spray button
serval times at rst time you use the iron in order to start the spraying
function.
• BURST OR VERTICAL STEAM IRONING
• Press the burst of Steam button to generate a powerful burst of steam
that can penetrate the fabrics and smooth the most dicult and tough
creases. Wait for a few seconds before pressing again.
• By pressing the Burst of Steam Button at intervals you can also iron
vertically (curtain,hung garments, etc.)
• Note: The burst steam function can only be used at high temperature.
Stop the emission when the pilot light turns on, then start ironing again
only after the pilot light has turned o.
4
5
Dry ironing
• For ironing without steam, follow the instruction in section “steam
ironing”, however, the steam control turning knob should remain in
position“OFF”(no steam).
ANTI-CALC SYSTEM
• A special lter inside the water tank softens the water and prevents
scale build-up in the soleplate. The lter is permanent and does not
need replacing.
• Note:Use tap water only. Distilled and demineralized water makes
the anti-calc system ineective by altering its physicochemical
characteristics.
ANTI-DRIPPING SYSTEM
• This iron is equipped with drip stop function: the iron automatically
stops steaming when the temperature is too low to prevent water from
dripping out of the soleplate.
• With the anti-dripping system, you can perfectly iron even the most
delicate fabrics.
FABRIC & TEMPERATURE INDICATOR
• Press on the Electronic Temperature Control to select the desired fabric
setting. The lights in the water tank will light up ,at the same time lights
will start to ash,they will stop ashing when the iron reaches the
sellected temperature,.
How to clean and store
• After using, lift the iron with the lling hole downwards to empty the
remaining water from the Water tank.
• Insert the plug into the socket, and set the Temperature Control Dial
to “MAX” for 1-2 minutes to evaporate the remaining water, and then
unplug the iron and let it cool down before storing it.
ATTENTION:
When the plug connecting with the power socket, the user is not allowed
to leave.
When the power cord is damaged, contact your dealers or an authorized
Meaning of crossed –out wheeled dustbin
• Do not dispose of electrical appliances as unsorted mu-
nicipal waste, use separate collection facilities.
• Contact you local government for information regarding
the collection systems available.
• If electrical appliances are disposed of in landlls or
dumps, hazardous substances can leak into the ground-
water and get into the food chain, damaging your health
and well-being.
• When replacing old appliances with new ones, the retail-
er is legally obligated to take back your old appliance for
disposals at least free of charge.
6
service center for repair.
In case of any repairs, replacement of cord or plug, or adjustment, please con-
sult a qualied technician, or take appliance to an authorized service facility.
This manual suits for next models
2
Table of contents
Languages:
