Matrix Simado GDT11 User guide

SIMADOGDT11
SystemManual
Magyarországon a Matrix Telecom Ltd. képviselete,
Matrix termékek importőre, kizárólagos forgalmazója:
1095 Budapest, Mester u. 34.
Telefon: *218-5542, 215-9771, 215-7550, 216-7017, 216-7018
Fax: [phone] Mobil: 30 940-1970, 20 949-2688
E-mail: [email protected] Web: www.delton.hu

Documentation Information
This is a general documentation and it covers many models with
different specifications. A particular product may not support all the
features and facilities described in the documentation.
Matrix Telecom reserves the right to revise information in this
publication for any reason without prior notice. Information in this
documentation may change from time to time. Matrix Telecom
makes no warranties with respect to this documentation and
disclaims any implied warranties. While every precaution has been
taken in preparation of this system manual, Matrix Telecom
assumes no responsibility for errors or omissions. Neither is any
liability assumed for damages resulting from the use of the
information contained herein.
Matrix Telecom reserves the right without prior notice to make
changes in design or components of the equipment as engineering
and manufacturing may warrant.
Neither Matrix Telecom nor its affiliates shall be liable to the
purchaser of this product or third parties for damages, losses, costs
or expenses incurred by purchaser or third parties as a result of:
accident, misuse or abuse of this product or unauthorized
modifications, repairs or alterations to this product or failure to
strictly comply with Matrix Telecom’s operating and maintenance
instructions.
All rights reserved. No part of this system manual may be copied or
reproduced in any form or by any means without the prior written
consent of Matrix Telecom.

Contents
Section1:Introduction ................................................................5
Welcome ...................................................................................... 7
Packing List ................................................................................. 8
Warranty Statement ..................................................................... 9
Introducing the System .............................................................. 12
Installing the System ................................................................. 13
Getting Started ........................................................................... 15
Section2:Features and Facilities ............................................. 21
Data Services ............................................................................. 23
FaxServices .............................................................................. 37
GPRS (General Packet Radio Service) .................................... 47
SMS (Short Message Service) .................................................. 76
Voice Services ........................................................................... 80
Section3: Appendix .................................................................. 91
Appendix A: Technical Specifications ....................................... 93
Notes .......................................................................................... 95
Programming Register ............................................................ 96

Section 1: Introduction

Matrix
SIMADO GDT11 System Manual 7
Welcome
Thanks for purchasing a Matrix product.
We want you to get the maximum performance from our product. If
you run into technical difficulties, we are here to help. But please
consult this system manual first.
If you still can’t find the answer, gather all the information or
questions that apply to your problem and, with the product close to
you, call your dealer. Matrix dealers are trained and ready to give
you the support you need to get the most from your Matrix product.
In fact, most problems reported are minor and can be easily solved
overthephone.
In addition, technical consultation is available from Matrix engineers
every business day. We are always ready to give advice on
application requirements or specific information on installation and
operation of our products.
The system manual is divided in following sections:
Section 1: Introduction
Section 2: Features and Facilities
Section 3: Appendix
We suggest the first time users to read this system manual in the
followingsequence.
• Section 1
• Section 2
The user can use page named ‘Notes’ for making note of
customer’s requirement and ‘Programming Register’ for
registering the programming changes datewise. These could be
used for future reference.

Matrix
8 SIMADO GDT11 System Manual
PackingList
The ideal sales package for SIMADO GDT11 is as mentioned below:
Sr. Accessories Qty.
01 SIMADO GDT11 1
02 Antenna 1
03 System Manual 1
04 Modem Cable 1
05 Adapter 9VDC 1Amp 1
06 Screw M 7/30 1
07 Screw Grip 1
08 Warranty Card Set 1
09 Support Card 1
10 SIMADO GDT11 CD 1
Sr. Accessories Qty.
01 SIMADO GDT11 1
02 Antenna 1
03 System Manual 1
04 Modem Cable 1
05 Adapter 9VDC 1Amp 1
06 Screw M 7/30 1
07 Screw Grip 1
08 Warranty Card Set 1
09 Support Card 1
10 SIMADO GDT11 CD 1
• Please make sure that these components are present.
• In case of short supply or damage detection, contact the source
from where you have purchased the system.
=X=X=

Matrix
SIMADO GDT11 System Manual 9
WarrantyStatement
Matrix Telecom Pvt. Ltd. (Matrix) warrants to its consumer
purchaser any of its products to be free of defects in material,
workmanship and performance for a period of 15 months from date
of manufacturing or 12 months from the date of installation which
everisearlier.
During this warranty period, Matrix will at its option, repair or replace
the product at no additional charge if the product is found to have
manufacturing defect. Any replacement product or part/s may be
furnished on an exchange basis, which shall be new or like-new,
provided that it has functionality at least equal to that of the product,
being replaced. All replacement parts and products will be the
property of Matrix. Parts repaired or replaced will be under warranty
throughout the remainder of the original warranty period only.
This limited warranty does not apply to:
1. Products that have been subjected to abuse, accident, natural
disaster, misuse, modification, tampering, faulty installation, lack
of reasonable care, repair or service in any way that is not
contemplated in the documentation for the product, or if the
model or serial number has been altered, tampered with,
defacedorremoved.
2. Products which have been damaged by lightning storms, water
or power surges or which have been neglected, altered, used for
a purpose other than the one for which they were manufactured,
repaired by customer or any party without Matrix’s written
authorization or used in any manner inconsistent with Matrix’s
instructions.
3. Products received improperly packed or physically damaged.
4. Products damaged due to operation of product outside the
products’ specifications or use without designated protections.
Warranty valid only if:
• Primary protection on all the ports provided.
• Mains supply is within limit and protected.
• Environment conditions are maintained as per the product
specifications.

Matrix
10 SIMADO GDT11 System Manual
Warranty Card:
• When the product is installed, please return the warranty card
with:
• Date, signature and stamp of the customer.
• Date, signature and stamp of the channel partner.
• Matrix assumes that the customer agrees with the warranty
terms even when the warranty card is not signed and returned
as suggested.
The Purchaser shall have to bear shipping charges for sending
product to Matrix for testing/rectification. The product shall be
shipped to the Purchaser at no-charge if the material is found to be
under warranty. The Purchaser shall have to either insure the
product or assume liability for loss or damage during transit.
Matrix reserves the right to waive off or make any changes in its
warranty policy without giving any notice.
If Matrix is unable to repair or replace, as applicable, a defective
product which is covered by Matrix warranty, Matrix shall, within a
reasonable time after being notified of the defect, refund the
purchase price of the product provided the consumer/purchaser
returns the product to Matrix.
In no event will Matrix be liable for any damages including lost
profits, lost business, lost savings, downtime or delay, labor, repair
or material cost, injury to person, property or other incidental or
consequential damages arising out of use of or inability to use such
product, even if Matrix has been advised of the possibility of such
damages or losses, or for any claim by any other party.
Except for the obligations specifically set forth in this Warranty
Policy Statement, in no event shall Matrix be liable for any direct,
indirect, special, incidental or consequential damages whether
based on contract or any other legal theory and where advised of
the possibility of such damages.
Neither Matrix nor any of its distributors, dealers or sub-dealers
makes any other warranty of any kind, whether expressed or

Matrix
SIMADO GDT11 System Manual 11
implied, with respect to Matrix products. Matrix and its distributors,
dealers or sub-dealers specifically disclaim the implied warranties of
merchantability and fitness for a particular purpose.
This warranty is not transferable and applies only to the original
consumer purchaser of the Product. Warranty shall be void if the
warranty card is not completed and registered with Matrix within 30
days of installation.

Matrix
12 SIMADO GDT11 System Manual
Introducing the System
The Matrix SIMADO GDT11 is a compact, ready to use unit
providing a standard 9 pin RS232 port (serial) for data
communication. When a PC is connected to the serial port, the
SIMADO GDT11 can efficiently be used for web browsing, sending
and receiving SMS, data transfer and fax services.
The SIMADO GDT11 which can be setup with minimal effort, finds
its application in business establishments, SOHO, Institutions, etc.
The SIMADO GDT11 offers advanced features like:
1. Short Message Services (Sending and Receiving of SMS).
2. Data Services (Sending and Receiving Data files).
3. Web Browsing (Exploring the Internet).
4. Fax Services (Sending and Receiving fax).
The SIMADO GDT11 is shown in the figure given below:
=X=X=

Matrix
SIMADO GDT11 System Manual 13
Installing the System
Safety Instructions
• Never do telephone wiring during a lightening storm.
• Avoid using telephone other than a cordless type during an
electric storm. There may be a remote risk of electric shock from
lightening.
• Never use a telephone to report gas leaks if it is near gas leak.
• Do not touch non-insulated telephone wires or terminals before
disconnecting at the network interface.
• Do not install this product near water, for example near a bathtub,
washing bowl, kitchen sink, laundry tub, swimming pool etc.
• Slots on enclosure are for proper ventilation. They will protect the
system from overheating. Never cover the slots.
• Never place this product on heated place or any other equipment.
• Never push objects of any kind inside this product. This may
short-circuit various parts.
• Unplug this product from electric wall outlet in following cases
and contact authorized service personnel.
• Liquid spills on to the product.
• Product exposed to rain or water.
• Product does not operate normally by following operating
instructions.
• Product dropped from height.
• Product exhibits unusual change in performance.
• Do not open the system in power ON condition. Never try to
remove the SIM card in power ON condition.
Installing the SIMADO GDT11
• Don’t power the system.
• Do not use the unit with damaged antenna.
• Fix the system on the selected site. Please refer ‘SIMADO
GDT11 Mechanical Drawing’ at the end of this topic. The site
chosen should ensure best call quality (Maximum signal
strength)
• Check the voltage at the power point from where the supply is to
be accessed via the adapter. It should be between 90 to 265VAC,
47-65Hz.

Matrix
14 SIMADO GDT11 System Manual
• Insert the SIM Card in the SIM card holder provided in the bottom
of the SIMADO GDT11.
• Please note that the SIM card gets easily damaged by scratches
or bending. Be careful when handling, inserting or removing the
card.
• Connect the power supply to the system. Ensure proper
contacts.
• To avoid the damage to the SIM card, do not power ON the
system till the SIM is installed.
• Connect the PC to the COM port of the SIMADO GDT11 using
the communication cable provided by Matrix.
SIMADO GDT11 Mechanical Drawing:
104.00 mm (4.09 Inch)
80.00 mm(3.15 Inch)
27.00 mm
(1.06 Inch)
SIMADO GDT11
=X=X=

Matrix
SIMADO GDT11 System Manual 15
GettingStarted
After strictly following the safety instructions and installing the
SIMADO GDT11 the system is now ready to be switched on.
• Switch on the system. The LED labelled ON glows.
• The SIM card detection takes place automatically.
• The system now searches for the network and when successfully
registered on the network, LED marked ‘NW’ flashes slowly.
• When the network is available LED marked ‘NW’ starts blinking
slightly faster.
• The SIMADO GDT11 is now ready for use.
Testing the Installation
1. Click on Start → Programs → Accessories → Communication
→ HyperTerminal.

Matrix
16 SIMADO GDT11 System Manual
2. Double click on Hypertrm Icon.
3. A New Connection Dialog Box with a text box for connection
description appears.

Matrix
SIMADO GDT11 System Manual 17
4. Enter a relevant name in the text box (such as the SIMADO
GDT11 connection), choose an Icon from the Icon list provided
and click on OK button.
5. In the “Connect To” Window, to fill up the ‘Connect Using’ text
box select the relevant COM Port. The rest of the options are
disabled automatically. Click on OK button.

Matrix
18 SIMADO GDT11 System Manual
6. In the COM Properties Window make the following entries. Bits
per seconds=115200, Data bits = 8, Parity = None, Stop bits =
One, Flow control = Hardware. Click on OK button.
7. In the HyperTerminal Window, Click on the Call Menu and then
Click on Menu Item Disconnect.

Matrix
SIMADO GDT11 System Manual 19
• The installation is complete.
Relevant Topic:
1. Installing the System 13
=X=X=