Matsing MS-MBA-4.2-H2-L2 User manual
TABLE OF CONTENTS:
BEAMS & CONNECTORS:
Plan View Resultant Beam Layout
Connector Ports Table
Connector Detail
Connector Layout
PATTERN DIAGRAM
Frequency: 1695 - 2690 MHz
Frequency: 698 -960 MHz
MANUAL TILT ADJUSTMENT
BRACKET, BOLT & NUTS REQUIREMENT
Bolts & Nuts
Bracket
Installation Sample (MBA Model's mostly identical installation)
TOOLS
Adjustable Spanner
M12 Spanner
Revision History:
INSTRUCTION MANUAL MS-MBA-4.2-H2-L2
MS-MBA-4.2-H2-L2
Instruction Manual
Date
Prepared by
Approved by
Document nos
Revision
21 Apr 2020
Ray Ling
Patrick Yeo
MBA-4.2-H2L2-IM-001
0
Date
Description
Revised by
Revision
nos.
email:
website:
Page
4.30
2.00
1.00
1.10
1.20
1.30
1.40
5.00
5.10
5.20
2.10
2.20
3.00
4.00
4.10
4.20
BEAMS & CONNECTORS:
Plan View Resultant Beam Layout Connector Ports Table
Connector Detail Connector Layout
2 / 5
1.20
1.40
1.30
Page
1.00
1.10
REAR VIEW CONNECTOR DETAIL
MS-MBA-4.2-H2-L2
PATTERN DIAGRAM
Frequency: 1695 - 2690 MHz
Frequency: 698 -960 MHz
3 / 5
Page
2.00
2.10
2.20
MANUAL TILT ADJUSTMENT
BRACKET, BOLT & NUTS REQUIREMENT
Bolts & Nuts
Bracket
4 / 5
Page
MBA-4.2-H2-L2
nos
1
3
When done, push the handle back in, screw the waterproof cap back to the position.
1
3.00
2
By Default the knob is on engaged mode, pull out the handle for manual tilt adjustment, turn the
handle to change the tilt.
4.00
Bracket
Bolt
Nuts
Qty
Size
Qty
Size
Qty
2
M12 x
160mm
4
M12
8
The MBA antenna come in RET mode as default, but if needed can also be manually adjusted. To
do so, please unscrew the waterproof cap behind the element whose tilt is to be adjusted.
Model Apply
MBA-2, MBA-8, MBA-3-H4, MBA-4-H4
MBA-3.2-H4-L4, MBA-2-L2, 6SH-LAA
4.10
4.20
Installation Sample (MBA Model's mostly identical installation)
TOOLS
Adjustable Spanner M12 Spanner
5 / 5
5.00
5.10
5.20
Page
4.30
BEFORE INSTALL
AFTER INSTALLED
AFTER INSTALLED
Table of contents
