Maverick NG1023 Configuration guide

NG1023
MAVERICK 7' POOL TABLE
WITHTABLE TENNIS
ASSEMBLY INSTRUCTIONS

THANK YOU!
Thank you for purchasing this product.
We work around the clock and around the globe to ensure that our products
maintain the highest possible quality. However, in the rare instance that your
product is defective or missing parts, contact your retailer, or call 800-759-0977,
to submit parts requests or warranty claims. Please read the warranty
information at the back of these assembly instructions for further details.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS
IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.
2

PARTS IDENTIFIER (NOT TO SCALE)
3
Please see Parts List at end of manual for part number when ordering parts. For replacement parts please call 800-759-0977.

ASSEMBLY TIPS
1. Find a clean, level surface to begin the assembly of your game table. The table will be
partially assembled upside down and then turned over onto its legs. This is a heavy game
and turning it over will require at least two strong adults.
2. Remove all of the contents from box and verify that you have all of the parts shown on the
Note: Some parts may be pre-installed or
pre-assembled.
understand the text before beginning each assembly step.
4. When installing parts that have more than one screw or bolt, hand tighten all screws or
bolts in place before finishing tightening with screwdriver or hex wrench.
5. Electric screwdrivers may be helpful during assembly; however, please set a low torque
and use extreme caution because screws may be stripped or overtightened if the electric
screwdriver's torque is set too high.
WARNINGS!
READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.
CHOKE HAZARD - THIS TABLE CONTAINS SMALL BALLS AND PARTS - NOT
SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.
4

ASSEMBLY INSTRUCTIONS
1. Attach LEFT LEGS #7 and RIGHT LEGS #8 to the corners of the TABLE BODY #5 as shown
below using 1-1/4" BOLT #1 and 5/16" FLAT WASHER #2. Note: The table is assembled upside
down.
2. Thread one LEG LEVELER #15 onto each LEG.
3. Attach each LEG END PANEL #6 to LEGS with 1" BOLT #3 and 1/4" FLAT
WASHER #4.
4. Attach each LEG SIDE PANEL #9 to LEGS with 1" BOLT #3 and 1/4" FLAT
WASHER #4. Carefully turn table over.
5

ASSEMBLY INSTRUCTIONS (CONT.)
5. To assemble TABLE TENNIS TOP, place TABLE TENNIS TOP A #17 and TABLE TENNIS TOP B
#18 on top of assembled pool table. Push halves together.
6. Clip each post of the TABLE TENNIS NET #19 to each side of the assembled
TENNIS TABLE TOP at the center line. Attach the net to each post.
6

CONGRATULATIONS!
You have now assembled your Game Table.
Please note the Care and Use instructions below to
ensure years of trouble free use of your game table.
CARE AND USE
1. This product is intended for INDOOR use only.
2. Do NOT sit, climb or lean on the table.
3. Do NOT drag the table when moving it as this will damage the legs.
7

180-DAY LIMITED WARRANTY
This product is warranted to the original purchaser to be free from defects in material or workmanship
for a period of 180 days from the date of the original retail purchase.
This warranty does not cover defects or damage due to improper installation, alteration, accident or
any other event beyond the control of the manufacturer. Defects or damage resulting from misuse,
abuse or negligence will void this warranty. This warranty does not cover scratching or damage that
may result from normal usage.
This product is not intended for institutional or commercial use; the manufacturer does not assume
any liability for such use. Institutional or commercial use will void this warranty.
This warranty is nontransferable and is expressly limited to the repair or replacement of the defective
product. During the warranty period, the manufacturer shall repair or replace defective parts at no
cost to the purchaser. Shipping charges and insurance are not covered and are the responsibility of
the purchaser. Labor charges and related expenses for removal, installation or replacement of the
product or components are not covered under this warranty.
The manufacturer reserves the right to make substitutions to warranty claims if parts are unavailable
or obsolete.
The manufacturer shall not be liable for loss of use of the product or other consequential or incidental
costs, expenses or damages incurred by the consumer of any other use. The user assumes all risk of
injury resulting from the use of this product.
This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of
merchantability or tness for use to the extent permitted by Federal or state law. Neither the manufac-
turer nor any of its representatives assumes any other liability in connection with this product.
All warranty claims must be made through the retailer where the product was originally
purchased. A purchase receipt or other proof of date of purchase will be required to process
all warranty claims. The model number and part numbers found within the assembly
instructions will be required when submitting any parts requests or warranty claims.
For further warranty information or inquiries, please call 800-759-0977

POOL TABLE WITH TABLE TENNIS - NG1023
Parts List
PARTS
HARD
WARE PACK - NGP5112
#1 #2 #3#4
5/16 INCH FLAT
WASHER
7/13
1-1/4 INCH BOLT 1 INCH BOLT 1/4 INCH FLAT
WASHER
#16
HEX WRENCH
#5NGP51123 #6NGP51133 #7NGP5114 #8NGP5115 #9NGP51163
LEFT LEG
#10 NGP5073
TABLE BODY LEG END PANEL RIGHT LEG BRUSH
LEG SIDE PANEL
#11 NGP5136
BILLIARD SET
#12 NGP5077 #13 NGP5191 #14 NGP5135 #15 NGP5121 #17 NGP5192 #18 NGP5193
CHALK CUE STICK TRIANGLE LEG LEVELER TABLE TENNIS
TOP A
TABLE TENNIS
TOP B
#19 NGP51226
TABLE TENNIS
NET
#20 NGP5138 #21 NGP5029
TABLE TENNIS
BALL
TABLE TENNIS
RACQUET
5
17
18
7
8
6
9
19
15