Maxim GB270 User manual

1
USER MANUAL
Blender - Grinder
MODEL NO: GB270
Congratulations on the purchase of your new
Kitchenpro by Maxim, Blender-Grinder.
Maxim recommends safety first. Please read this user instruction manual
carefully and follow all the safety and user instructions.

2
Contents
Overview………………………………………………………………………………………………….
1. Intended purpose…………………………………………………………………………………….
2. Safety information……………………………………………………………………………………
3. Items supplied………………………………………………………………………………………….
4. How to use……………………………………………………………………………………………….
5. Operation…………………………………………………………………………………………………
6. Cleaning……………………………………………………………………………………………………
7. Storage……………………………………………………................................................
8. Trouble-shooting……………………………………………………………………………………….
9. Technical specifications……………………………………………………………………………..
10. Warranty……………………………………………………………..…………………………………...
Overview
1 TURBO Button for high speed
2Power cable with mains plug
3Motor block
4Working cover
5Cream attachment
6Blade insert (spring-mounted)
7Vessel (holding capacity: 500 ml)
8Spindle
9Vessel cover (can also be used as the base)

3
Thank you for your trust!
Congratulations on your new Maxim Kitchenpro Blender-Grinder. For a safe handling of the product
and in order to get to know the entire scope of features: Thoroughly read these operating
instructions prior to initial commissioning. Above all, observe the safety instructions! The device
should only be used as described in these instructions. Keep these instructions for reference. If you
pass the device on to someone else, please include these instructions.
1. Intended purpose
The Blender-Grinder is intended exclusively for chopping food and for whipping cream. The device is
designed for use in private households. The device must only be used indoors. This device must not be
used for commercial purposes.
Foreseeable misuse
WARNING! Risk of material damage! Do not use the device for chopping particularly hard food, e.g.
frozen food, bones, nutmeg, grain or coffee beans.
2. Safety information
Warnings If necessary, the following warnings will be used in these operation instructions:
DANGER! High risk: Failure to observe this warning may result in injury to life and limb.
WARNING! Moderate risk: Failure to observe this warning may result in injury or serious material
damage.
CAUTION: Low risk: Failure to observe this warning may result in minor injury or material damage.
NOTE: Circumstances and specifics that must be observed when handling the device.
DANGER for children.
1. Packing materials are not children’s toys. Children should not be allowed to play with the
plastic bags. There is a risk of suffocation.
2. This device must not be used by children. Cleaning and user maintenance must not be
performed by children. Children must be kept away from the device and the power cables
3. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
4. Children should be supervised to ensure that they do not play with the appliance.
5. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
6. Take care when handling the sharp cutting blades, emptying the bowl and during cleaning.
7. Always disconnect the appliance from the supply if it is left unattended and before
assembling, disassembling or cleaning.
8. Do not allow children to use the appliance without supervision.
9. CAUTION: Ensure that the appliance is switched off before removing it from the stand.
10. Switch off the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
11. The appliance is only intended for the purpose described in user manual. Do not use

4
appliance or any part of the appliance out of the intended use to avoid risk.
12. The use of attachments which are not recommended or sold by the appliance manufacturer
may cause a risk of injury to persons.
DANGER! Risk of electric shock due to moisture
1. This device must never be operated closed to a bathtub, shower, filled hand basin or similar.
2. The motor block, the power cable and mains plug must not be immersed in water or any
other liquids.
3. Protect the motor block against moisture, drips and splashes.
4. If liquid gets into the motor block, remove the mains plug immediately. Have the device
checked before reusing.
5. Never touch the device with wet hands.
6. If the device falls into water, disconnect the mains plug immediately Only then is it safe to
retrieve the device.
7. Fill the vessel with a maximum of 200 ml of liquid in order to prevent liquid from getting
into the motor block.
DANGER! Risk of electric shock
1. Only insert the mains plug into the wall socket after the device has been completely
assembled and filled.
2. Only connect the mains plug to a properly installed and easily accessible wall socket whose
voltage corresponds to the specifications on the rating plate. The wall socket must continue
to be easily accessible after the device is plugged in.
3. Ensure that the power cable cannot be damaged by sharp edges or hot points. Do not wrap
the power cable around the device.
4. The device is not fully disconnected from the power supply, even after it is switched off. In
order to fully disconnect it, pull out the mains plug.
5. When using the device, ensure that the power cable cannot be trapped or crushed.
6. When removing the mains plug, always pull the plug and never the cable.
7. Disconnect the mains plug from the wall socket…
…if there is a fault,
…when you are not using the Blender-Grinder
…before you assemble or disassemble the Blender-Grinder
…before you clean the Blender-Grinder, and
…during thunderstorms.
8 Do not use the device if there is visible damage to the device or the power cable.
9 To avoid any risk, do not make modifications to the device. You also must not replace the
power cable yourself. Repairs must be carried out by a specialist workshop or the Service
Centre.
DANGER! Risk of injury from cutting.
1 The blade insert is sharp. Handle it with care. When washing manually, the water should be
sufficiently clear that you can see the blades easily.
2 The device must never be operated without the vessel.
3 Never reach into the rotating blades. Do not touch rotating parts with spoons or similar utensils.

5
4 Keep long hair or loose clothing away from rotating parts as well.
5 The blade insert continues to rotate after the device is switched off. Wait for it to stop moving
before you remove the working cover.
WARNING! Risk of material damage
1The maximum filling level for solid food is 350 ml.
2The maximum filling volume for liquids (e.g. cream) is 200 ml.
3The device is designed for a maximum operating time of 1 minute without interruption. After
this, the device must remain switched off until it has cooled down to room temperature.
4In order to avoid damage to the device, interrupt the mixing process immediately if the blade
insert / cream attachment does not rotate or only rotates slowly. Pull out the mains plug and
check whether there is something in the vessel blocking movement or whether the food is too
tough. Also check whether the device is assembled correctly.
5Do not operate the device when it is empty, as this causes the motor to overheat and may result
in it being damaged.
6Only use the original accessories.
7Do not use any abrasive cleaning agents.
8The device is fitted with a non-slip plastic base. Because furniture can be coated with a wide
variety of varnishes and plastics and treated with various care products, the possibility cannot
be excluded that some of these substances have ingredients that may attack and soften the
plastic base. If necessary, place a non-slip mat under the device.
3. Items supplied
1 Motor block 3
1 Working cover 4
1 Vessel 7
1 Vessel cover 9
1 Blade insert 6 and 1 cream attachment 5 (assembled)
1 Set of operating instructions
4. How to use
Remove all packing material.
Check to ensure that all parts are present and undamaged.
Clean the device prior to its first use! (see”cleaning” on page 8)
5. Operation
DANGER! Risk of electric shock!
Only insert the mains plug 2 into a wall socket when the Blender-Grinder is fully assembled
and filled.
DANGER! Risk of injury from cutting!
The blade insert is sharp. Handle it with care.
The device must never be operated without the vessel.
The blade insert continues to rotate after the device is switched off. Wait for it to stop
moving before you remove the working cover.
WARNING! In order to avoid damage to the device, interrupt the mixing process

6
immediately if the blade insert 6 / cream attachment 5 does not rotate or only rotates
slowly. If this happens, pull out the mains plug 2 and check whether there is something in
the vessel 7 blocking movement or whether the food is too tough. Also check whether the
device is assembled correctly.
5.1 Blade insert
Application area
The blade insert 6 is suitable for chopping solid foods, e.g. onions, carrots, cheese, nuts.
Preparing food
Use no more than the maximum filling level of 350 ml of solid food, or a maximum of 200
ml of liquid.
Rinse or wash the food. Cut the food into small cubes (approx. 2-3 cm edge length).
Remove the outer shell from nuts. The inner shell can be used if so desired, e.g. with
almonds.
Free herbs from their stems.
Separate the bones from meat and remove sinews and skin.
Processing table:
Ingredients
Recommended quantity
Recommended processing time
/ speed
Onions(quartered)
100 g
Pulse / TURBO
Garlic (whole cloves)
100 g
Pulse / TURBO
Walnuts
50 g
2 x 8 sec. TURBO
Almonds
50 g
1 x 10 sec. (coarse)
1 x 30 sec. (fine) TURBO
Cheese(e.g. Gouda, cold)
100 g
3 x 15 sec. TURBO
Salami
130 g
3 x 5 sec. TURBO
Diced lean beef (approx. 2 cm
edge length)
200 g
3 x 12 sec.
TURBO
Carrots
100 g
3 x 5 sec. normal
Dried fruit
130 g
3 x 15 sec. TURBO
Ice cubes
100 g
Pulse / TURBO
NOTE: The processing times and speeds specified here are guidelines.
Depending on the quantities and consistency of the foods, the actual values may differ.
Repeatedly check the results, depending on how small you want to chop the food.
Work using short pulses (1 pulse: press for approx. 1 second).

7
Assembling the device:
CAUTION: Depending on the hardness and consistency of the food, do not fill the vessel 7 up to the
maximum level, as this can cause the blade insert 6 to become blocked. Pay attention here to the
guideline values for various foods in the “processing table” section.
1. Place the vessel 7 on the vessel cover 9.
2. Place the blade insert 6 on the spindle 8 in the vessel.
3. Place the prepared food into the vessel 7
4. Figure B: Place the working cover 4 onto the vessel 7 in such a way that the two small tabs on the
working cover fit into the grooves in the vessel and rotate the working cover clockwise until it
clicks into place.
5. Place the motor block 3 into the upper edge of the working cover 4.
NOTE: The motor block does not fit onto the working cover entirely straight on the right-hand
side.
6. Insert the mains plug 2 into a wall socket corresponding to the technical date.
Shredding
Figure C: In order to work at normal speed, pass the motor block 3 down and then release it again.
Figure D: In order to work at high speed, additionally press down on the TURBO 1 button.
Work using short pulses (1 pulse: press for approx. 1 second). The number and length of the pulses
will depend on the quantity and consistency of the food. See the specifications given in the
“Processing table” section.
- Repeatedly check the result. If the food is not being chopped evenly:
- Pull out the mains plug 2, remove the motor block 3 and thoroughly shake the vessel 7.
- If food is sticking to the inside wall of the vessel, rotate the working cover 4 anti-clockwise and
remove it. Push the pieces downwards using a spatula.
- Put all the pieces back together before you reinsert the mains plug 2 into a wall socket and
resume work.
5.2 Cream attachment
Application area
The cream attachment 5 has been specially designed for whipping cream in the Blender-Grinder. It is
placed on top of the blade insert 6. There are two options here: one for smaller quantities (up to 100
ml) and one for large quantities (100 to 200 ml).
NOTE: Wherever possible, work with well cooled whipping cream (refrigerator temperature), so that
the whipped cream reaches a firm consistency.
Whipping cream
1. Place the vessel 7 on the vessel cover 9.
2. Carefully place the cream attachment 5 onto the blade insert 6 from above.
- Up to 100 ml: Figure E: Rotate the cream attachment so that it is in contact with both blades and
clicks into place.
- 100 to 200 ml: Figure F: Rotate the cream attachment so that it is in contact with one of the

8
blades and clicks into place. This causes it to sit higher in the vessel.
3. Place the blade insert 6 together with the cream attachment 5 onto the spindle 8 in the vessel.
4. Pour the cooled whipping cream (maximum 200 ml) into the vessel 7.
5. Place the working cover 4 onto the vessel 7 in such a way that the two small tabs on the working
cover fit into the grooves in the vessel and rotate the working cover clockwise until it clicks into
place.
6. Place the motor block 3 into the upper edge of the working cover 4.
NOTE: The motor block does not fit onto the working cover entirely straight on the right-hand
side.
7. Press down on the motor block 3 and hold it press down for approx. 30 to 50 seconds. Check the
result while doing so.
5.3 Remove food
NOTE: You can choose to use the vessel cover 9 as the cover or the base (Figure G).
1. Disconnect the mains plug 2 from the wall socket.
2. Remove the motor block 3.
3. Rotate the working cover 4 anti-clockwise and remove it.
4. Carefully remove the blade insert 6 (if necessary together with the cream attachment 5) from the
vessel 7.
5. Remove the food, e.g. using a spatula.
6. Clean the device as soon as possible after use.
6. Cleaning
Clean the device prior to its first use!
DANGER! Risk of electric shock!
Pull the mains plug 2 out of the wall socket before you clean the Blender-Grinder.
The motor block 3, the power cable and the mains plug 2 must not be immersed in water or
any other liquids.
DANGER! Risk of injury from cutting!
When washing manually, the water should be sufficiently clear that you can see the blade
insert 6 easily.
WARNING! Risk of material damage!
Do not use any abrasive cleaning agents.
Dismantling the device:
1. Pull out the mains plug 2.
2. Remove the motor block 3.
3. Rotate the working cover 4 anti-clock-wise and remove it.
4. Carefully remove the blade insert 6 (if necessary together with the cream attachment 5) from the
vessel 7.
5. Figure A: Carefully press the blade insert 6 downwards out of the cream attachment 5.
6. Remove the vessel cover 9 from the vessel 7.

9
How to clean properly:
1. If necessary, wipe down the motor block 3 and the power cable 2 with a damp cloth. Ensure that
the motor block 3 is completely dry before the next time it is used.
2. Rinse all accessory parts manually, except for the motor block 3.
Use detergent for stubborn incrustation and for all accessories coming into contact with food.
NOTE: The inserts 5 + 6, the container 7 and the covers 4+9 are suitable for dishwashers.
3. Allow all parts to dry completely before you put them away or use the device again.
Some cleaning tips:
Clean the device as soon as possible after use in order to prevent food remnants from drying
on.
After processing very salty or acidic types of food, you should immediately rinse the blade
insert 6 thoroughly.
7 Storage
DANGER for children! Keep the device out of the reach of children.
DANGER! In order to avoid accidents, the mains plug 2 must never be connected to a wall
socket while in storage.
Assemble the multi chopper for storage purposes. This allows the blade insert 6 to be stored
safely.
Select a location where neither high temperatures nor moisture can affect the device.
8. Trouble-shooting
If your device fails to function as required, please try this checklist first. Perhaps there is only a minor
problem, and you can solve it yourself.
DANGER! Risk of electric shock! Do not attempt to repair the device yourself under any
circumstances.
Fault
Possible causes / Action
No function
Has the device been connected to the power
supply?
Check the connection.
Is the top edge of the working cover 4 clean?
Blade insert 6 does not rotate or only rotates
with great difficulty
Switch off immediately, pull out mains plug 2 and
check:
Blockage in the vessel?
Food too tough or too hard?
Device not assembled correctly?
Vessel 7 looks cloudy due to hard food
This is normal and does not affect the function.
Disposal – Packaging When disposing of the packaging, make sure you comply with the environmental
regulations applicable.
9. Technical specifications
Model:
BG270
Mains voltage:
220-240V~ , 50 Hz
Protection class:
II

10
Power rating:
260 W
Max. continuous operation (KB):
1 minute
Subject to technical modification.
10.
WARRANTY
Our goods come with guarantees that cannot be excluded under Australian Consumer Law. You
are entitled to a replacement or refund for a major failure and compensation for any other
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure. The
above applies subject to the item not being accidently dropped by the user-or being used for
purposes other than the intended use - or being tampered with. Maxim Housewares guarantees
the product for 12 months from date of purchase. Refunds or replacements at retail store level
are under the guidance of the stores rules/regulations. In the event of requiring assistance, the
retailer from whom you purchased the product should be your first port of call.
Supplier warranting this product:
Maxim Housewares
38 Allied Drive, Tullamarine
Victoria, 3043, Australia.
12 months warranty from date of purchase. 90 days warranty from date of purchase if used
commercially. If your retailer has not validated your guarantee, then retain your purchase receipt.
The guarantee does not cover accidental breakage or damage of your product or if it has been
tampered with.
Product Model Number: GB270
Purchase Date: _________________________________________________
Retailer: ______________________________________________________
Retailer Store Address: __________________________________________
Name of Purchaser: _____________________________________________
Address: ______________________________________________________
______________________________________________________
Due to the Maxim policy of continual product development; specifications, colours and details
of our products as listed or depicted in this user manual or on the product and its carton may
differ slightly.
Product: Made in China.
To view the full range of Maxim Housewares products, please go to our website.
www.maximhousewares.com
For additional consumer support – email us at:

11
[email protected]