Maxkin SS-V01 Plus User manual

Door/Window Sensor
& Vibration Sensor
SS-V01 ( PLUS )
This detector combines vibration and door/window sensor. The vibration
sensor is composed by microprocessor. 360 degrees detection. The
vibration sensor and analyzer are in one with CPU processing technology.
Normal close output is compatible with alarm system. Better
protect the security of property. It is designed to eliminate common false
alarms effectively to adjust the sensitivity accordingly to the environment.
The door/window sensor can be installed on doors, windows and any other
objects that open and close. The sensor transmits signal to control panel
when the magnet mounted near the sensor is moved away. Double safety!
It’s suitable for indoor applications such as villa, school, offices and store
etc. Effective protection over shock, strikes from sledgehammers,
repeated knocks from hammer and chisel attacks etc. It is designed with
compact size, easy to install and more reliable.
Unique design, easy to install.
Adopted MCU.
High/low sensitivity adjustment.
Plus series with lower power Frequency-Hopping Spread Spectrum
for anti-interference .
1 year long lifespan of the battery, easy to replace.
Detects the opening or closing of a window, door, gate or roller blind
and the true physic vibration with low false alarm.
Tamper protection, lower battery notification.
Features:
Power Supply: DC 3V (2pcs of AAAA No.9 LR61 Battery)
Standby Current : SS-V01: ≤25μA
SS-V01 PLUS: ≤30μA
Alarm Current: SS-V01: ≤26mA
SS-V01 PLUS:≤35mA
Temperature: -20°C~55°C
Humidity: 40%
RFI Characteristic: 25V/m(10Mhz~ 1Ghz)
Digital processing unit: 12/8 nits MHz
Detector Dimensions(L x W x H): 21 X 90 X 18mm
Magnet Dimensions(L x W x H): 10 X 45 X 11mm
Specification:
Anti-wireless and electromagneticwave, do not touch
the interface.
Working Status:
2
8
7
H
9
6
10
1. Transmitter
2. Magnet
3. LED Indicator
4. Door Sensor
5. Vibration Sensor
6. Tamper Switch
7. Battery Compartment
8. Upgrading Software Terminal Block
9. Sensitivity Setting
10. Connector for Wired Sensors (N/C)
1
Vibration Sensor:
Once intruder attempts to move the sensor.
The control panel will send tamper alarm message to user at the first time.
Tamper Switch：
33
SW1
4
5
LED flashes once every three seconds: Lower battery, please replace the
battery (AAAA LR61) LED flashes once every one second: Power on/
Detecting Alarm/Tamper Alarm
LED Indicator:
Enrolled to Control Panel:
System beeps once, the LED light flashes once,the
enrollment is successful.
If system beeps twice and the LED light flashes
once,the accessories have been enrolled before.
If three beeps are heard and LED light flashes
once,the storage is full.
1
2
3
Presstheenrollbutton,thecontrolpanelentersinto
enrollingstatus,theLEDlightsupinred(Pressagainthe
enrollbuttonwithin20secondstoexitenrollingstate.)
Connectingvibrationsensortocontrolpanel:triggered
thevibrationbyslightlyknocktheshell.
Connectingdoorsensortocontrolpanel:departthe
transmitterandmagnet (Enrolledbyvibration,the
defaultzoneis24-hourzone,enrolledbydoorsensor,
defaultzoneisnormalzone4).
Note: Please do not use the tamper switch or trigger low battery
to enroll
Enrolling Way Power On Connecting Door Sensor Connecting Vibration Sensor
Detector Door Sensor Door Sensor
SS-V01 PLUS
FHSS Frequency
Sensor Zone Type
SS-V01
Normal Frequency
Sensor Zone Type
Wireless Zone 1 Wireless Zone 1 24-Hour Zone 1
Note：Wireless sensor zone type will be separately according to sensor for FHSS series.
While normal frequency sensor type will not be separated.
Wireless
Zone 4
Door Sensor
24-Hour Zone 1
Vibration Sensor
Wireless
Zone 4
Wireless
Zone 4
24-Hour Zone 1 24-Hour Zone 1
Vibration Sensor Vibration Sensor

Notice:
1.The detector should be installed on the ceiling or walls adjacent or the places opposite the
protected glass and where opening or closing of a window, door, gate or medicine cabinets etc.
2. Secure the detector installation and keep it dry.
3. Avoid mounting sensor in areas with a large quantity of metal or electrical wiring, such as
furnace or utility room.
4.Avoid sources of ambient vibration or sound, such as loudspeakers, air conditioners, fans,
blowers or doorbells.
5. Pay attention to the frequency range of vibration. The high vibration and ultrasonic
interference are likely to lead to false alarm.
6.Magnet no more than 1cm away from the transmitter and magnet with double-sided tapes
or screws.
When it senses door opening or moving and shaking in arm status,
it will alarm immediately and send notification or make a phone call.
Working Mode:
1. Remove the battery activation strip and power it on, detector enters
into working mode.
2. Choose the desired location where opening or closing of a window,
door, gate or medicine cabinets, safe box and the true physic vibration.
3. Keep position clean before installing.
4. Remove the paper strip of the double-sided tape on the back of
transmitter and magnet. Carefully mount the transmitter on the door
frame and the magnet on the door.
5. Or you can fix the rear base on the place by using the screws for both
transmitter and magnet.
Installation:
1234
The detector has two sensitivity settings which are
set using screwdriver to turn to the position.
: Low sensitivity for the environment produces echosL
: High sensitivity for the place with sound-proof H
material in the room.
H
Sensitivity Adjustment:
When there is a certain external force disturbance of the glass or wall. The
vibration will identify whether alarm according to the vibration frequency.
6
4
2
1
-2
-4
-6
4 4 5 5 5 5 6 6 5
Times
Frequency
6
4
2
1
-2
-4
-6
4 4 5 5 5 5 6 6 5
Times
Frequency
Vibration Testing: