Maxxair HVWM 18PF User manual

Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728 1-800-433-1626 Fax: [phone] www.MYMAXXAIR.com
Task ID #
SKU / Document #
©2020 VENTAMATIC, LTD. MA HVWM 18CDPF INSMAN 1208/1106
MA HVWM 18CDPF InsMan 1106
Maxx Air
18” Wall Mount Poultry Fan
Models: HVWM 18PF & HVWM 18CDPF
SAFETY
This safety alert symbol is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Danger indicates an imminently hazardous situation, which,
if not avoided, will result in death or serious injury.
DANGER
Warning indicates a potentially hazardous situation, which,
if not avoided, could result in death or serious injury.
WARNING
Caution indicates a potentially hazardous situation, which,
if not avoided, may result in minor or moderate injury.
CAUTION
Used to indicate an electrical shock or electrocution hazard.
ELECTRICAL
SHOCK
SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
IMPORTANT SAFETY INSTRUCTIONS ▬READ AND SAVE THESE INSTRUCTIONS
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
• Disconnect fan when moving from one location to
another.
• Disconnect fan when removing guards
for cleaning.
•Make sure fan is on a stable surface when
in operation.
• Rain and moisture may create an
electrical hazard.
• This appliance has a 3-prong plug. To
reduce the risk of electrical shock, this
plug is intended to t in an outlet one
way. If this plug does not t in the outlet,
contact a qualied electrician.
• WARNING: To reduce the risk of re or
electric shock, do not use this fan with
any solid-state speed control device.
• CAUTION: For general ventilating use
only. Do not use to exhaust hazardous
or explosive materials or vapors.
• CAUTION: Disconnect the power to the
fan before cleaning.
• DO NOT insert ngers or any objects
through the grille guard when fan is in
operation.
• DO NOT operate fan if any part is
damaged or missing.
WARNING
CAUTION
CAUTION
Your Maxx Air fan is shipped fully assembled. Enjoy the
powerful, cooling breeze that the fan will provide for virtually
any indoor application. There are no additional spare parts
shipped with this item.
Specications
Totally enclosed motor meets NEC 547-7 (2008) requirements for
use in Agricultural Areas. This unit has a 110-120 Volt A/C polarized
grounded plug. Do not remove grounding conductor from plug or
use with an extension cord.
Warning
To reduce the risk of re or electric shock, do not
use with any solid state speed control device. This
fan motor is equipped with an automatic reset
overload device. The fan may start unexpectedly.
Do not put any object through the grilles into the
blade or motor. This fan is designed for indoor
use only. Do not use to exhaust hazardous
chemicals or vapors. Unplug unit for storage,
when not in use or moving locations.
Installation
Minimum Attachment Requirements: 2x4
studding capable of supporting at least 50 lbs.
Use a 3/8” diameter x 2” long Lag Screw with at
washer (Fig.1 not included). Attach the fan to wall using the hole in
the wall bracket with the above mentioned lag screw.
Additional screws can be used to stabilize the wall mount if needed,
however they are not required.
Please Call: 1.800.433.1626 if you have any questions about the
installation or operation of this fan.
Operating Instructions
1. Plug cord into a properly grounded receptacle.
2. Turn the knob on the fan to select the desired speed or turn the
fan o.
User Servicing Instructions
Warning: Unplug the fan from electrical supply before
cleaning.
1. Use soft, damp cloth to clean the fan.
Remove any moisture with a clean, dry cloth.
2. Do Not use any cleaning solution that is
harmful to the paint or plastic.
3. Do Not bend blade when cleaning fan.
4. Motor is permanently sealed and does
not require additional lubrication.
5. Ensure all fan guards are reinstalled as
previously installed after cleaning.
WARNING
WARNING
Figure 1
3/8” x 2”
Lag Screw
& Washer

Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728 1-800-433-1626 Fax: [phone] www.MYMAXXAIR.com
©2020 VENTAMATIC, LTD. MA HVWM 18CDPF INSMAN 1208/1106
VENTAMATIC, Ltd.
LIMITED WARRANTY STATEMENT
This warranty is underwritten by Falco Insurance Company and is extended to the original
retail purchaser of this model or, if this unit is purchased and requires installation by a building
contractor, to the original owner of the home. No subsequent purchaser of the unit or of a home
in which it is installed is entitled to any of the benets of this warranty.
This product is warranted against defects in materials and workmanship for a period of one (1)
year from the date of original retail purchase. No other parts or components are warranted.
There is no warranty for defects caused by abuse, faulty installation, or the like.
Repairs or replacement parts supplied under this warranty are warranted only for the period of
this warranty; that is, one (1) year from the date of the original retail purchase of the unit.
In the event of a defect or malfunction, we will replace or repair the defective part or component
only and return the new or repaired part to you freight prepaid.
You must bear all other expenses incurred in obtaining repairs, including labor required for eld
repair or replacement, and the cost of shipping the defective part to us. You must also bear the
cost of repair to or replacement of any part or component and the shipping charges incurred
for the repair or replacement and return to you of any part or component not covered by this
warranty, including parts or components damaged by you.
The company reserves the right to demand and receive written evidence of the date of purchase
before undertaking its obligations under this warranty. The right to demand and receive written
evidence of date of purchase extends to all licensed dealers of Ventamatic, Ltd. products.
You should, therefore, retain your sales slip and attach a copy of it to the warranty claim.
To start a warranty claim you must:
Contact Ventamatic, Ltd.
An RGA (Returned Goods Authorization) form is required for returns to the factory
to ensure your return can be processed eciently and quickly. Please contact
Ventamatic, Ltd. toll-free at 800-433-1626 or via web at www.bvc.com to obtain an
RGA and follow the instructions given.
There is no informal dispute settling mechanism available in the event of a controversy involving
this warranty.
Any and all implied warranties which may exist terminate upon the expiration of this warranty
one (1) year from the date of the original retail purchase. Some states do not allow limitations on
how long an implied warranty lasts, so this limitation may not apply to you.
Ventamatic, Ltd. is not liable to you for incidental or consequential damages arising out of defect
or malfunction of a unit or its installation or out of any alleged breach of this warranty. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so this
limitation may not apply to you.
This warranty gives you specic legal rights and you may also have other rights which may vary
from state to state.
rev. 04/19