MayQueen Technologies HW6UL-CORE Quick user guide

HW6UL-CORE
Hardware Reference Manual
Rev 1.0 20180601

Copyr ght
MayQueen Technologies Ltd., All rights reserved.
MayQueen Technologies Ltd. reserves the right to make improvements in the
products described in this manual at any time without notice. No part of this
manual may be reproduced, copied, translated or transmitted in any form or by
any means without prior written permission of MayQueen Technologies Ltd..
Trademark
The MayQueen logo is a registered trademark of MayQueen Technologies Ltd..
All other trademarks or registered marks in this manual belong to their
respective manufacturers.
Rev s on H story
evision Date Author Description
V1.0 07/01/2018 Wig First elease

Contents
Copyright..............................................................................................................................................2
Trademark.............................................................................................................................................2
Revision History...................................................................................................................................2
1. HW6UL-CORE ystem-on-Module Overview...............................................................................1
1-1. Introduction...................................................................................................................................1
1-2. General Care and Maintenance.....................................................................................................2
1-3. HW6UL-CORE Block Diagram...................................................................................................3
1-4. HW6UL-CORE COREs definition...............................................................................................4
1-5. Electrical Characteristics...............................................................................................................6
1-6. PCB ize Overview.......................................................................................................................6

HW6UL-CORE Hardware Reference Guide v1.0 - July 01 2018
1. HW6UL-CORE System-on-Module Overv ew
1-1. Introduct on
The HW6UL-CORE is a high performance system-on-module designed around the NXP i.MX6UL
solo core arm Cortex-A7 CPU, As well as high processing power, compact, cost effective with low
power consumption.
The HW6UL-CORE is typically being used as embedded system, this system-on-module main
chips is including CPU, DRAM, NAND Flash and two board-to-board 80-pin pin headers (Core A
and Core B) that implement other features such as display, ethernet, U B, WiFi, Codec GPIO and
etcetera.
MayQueen Technologies wish HW6UL-CORE could help customers quick to market for the
product level.
1
DDR3 Memory
IMX6UL CPU
NAND Flash
Core-A P n connector
Core-B P n connector
Power LED
System status LED

HW6UL-CORE Hardware Reference Guide v1.0 - July 01 2018
1-2. General Care and Ma ntenance
This system-on-module is a product of superior design and craftsmanship and should be treated
with care, please following useful suggestions:
•Keep the devices dry. Precipitation, humidity, and all types of liquids or moisture can
contain minerals that will corrode electronic circuits. If your device does get wet, allow it to
dry completely.
•Do not use or store the device in dusty, dirty areas. Its moving parts and electronic
components can be damaged.
•Do not store the device in hot areas. High temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain plastics.
•Do not store the device in cold areas. When the device returns to its normal temperature,
moisture can form inside the device and damage electronic circuit boards.
•Do not attempt to open the device. Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
•Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
•Do not paint the device. Paint can clog the moving parts and prevent proper operation.
This WEEE symbol on the system-on-module or on its packaging indicates that this product must
not be disposed of with your other household waste. Instead, it is your responsibility to dispose of
your waste equipment by handing it over to a designated collection point for the recycling of waste
electrical and electronic equipment. The separate collection and recycling of your waste equipment
at the time of disposal will help to conserve natural resources and ensure that it is recycled in a
manner that protects human health and the environment. For more information about where you
can drop off your waste equipment for recycling, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
2

HW6UL-CORE Hardware Reference Guide v1.0 - July 01 2018
1-3. HW6UL-CORE Block D agram
3

HW6UL-CORE Hardware Reference Guide v1.0 - July 01 2018
1-4. HW6UL-CORE COREs def n t on
CORE-A
4

HW6UL-CORE Hardware Reference Guide v1.0 - July 01 2018
CORE-B
5

HW6UL-CORE Hardware Reference Guide v1.0 - July 01 2018
1-5. Electr cal Character st cs
•5Vdc Power upply, larger than 500mA is suggestion
•Power Consumption of Operating Mode: 1.08W
•Power Consumption of Idle Mode: 0.48W
•Power Consumption of uspend Mode: 12mW
•Operating Temperature: -40°C to 85°C
•Humidity :10% to 90% (operating status), 5% to 95% (storage status)
•MTBF: > 100,000 hour
•hock: 50G / 20 ms
1-6. PCB S ze Overv ew
•ize is 60x46, Unit: mm
•Pin interval of Core connector is 1.27mm for 2 * 40pins.
6