Maytag LAT9605 User manual

Models: LAT9605 •LAT9615 •LAT9635 "LAT8435 " LAT8415 * LAT8405 "LAT8705 °LAT4915
TABLE OF CONTENTS ABOUT YOUR MAYTAG
Page
About Your Maytag ........ Inside Front Cover Congratulations on yonr choice of a Maytag washer!
Your satist_action is very important to us. The iuforma-
Future Referenee ......... Inside Front Cover tion in this USER'S GUIDE will help you understand
Safety Instruetions ........................ 1 how },our washer operates. Additional information on
Using Laundry Additives .................... 2-3 proper laundering techniques is found in the MAYTAG
Loading the Washer ...................... 3 LAUNDERING GUIDE. By following these instruc-
tions carefully, you _dll achieve excellent results with
Operating Instructions ................... 4-6 your washer.
Select Water Level ....................... 4 If you have any questions about using your Maytag
Select Wash/Rinse Water Temp ............. 4 washer, contact us. Please haxe the washer's model and
Select Cycle and Time .................... 5 serial numbers available.
Start the Washer ......................... 6 Maytag Consumer Education
Indicator Lights ......................... 6 One Dependability Sqnare
Maintaining the Washer ....................... 6 Newton,IA ,50208
Storing the Washer ....................... 6 [phone] (8 am 5 pm Central time Mon.-Fri.)
Cycle Descriptions ............................. 7
Water Usage ............................. 7 NOTE: For service and warranty information, see
pages 8-9.
Before You Call for Service ................ 8
Warranty ................................ 9 FOR FUTURE REFERENCE
ConsumerPublications .................... 9
We suggest you retain this guide after recording thei
NOTE: In a continuing effort to improve our wash- Imodel nmnber and serialnmnber (eight nmnbers and
ers it may be necessary to make changes to the ]twoletters) of this washer in the spaces provSdedbelmwappearance without revising this guide. This information can be found on the data plate locat-
ed at the top of the control panel cover.
IMPORTANT: Keep your sales slip or cancelled
check. Proof of original purchase date is needed
for warranty service.
ModelNumber SerialNumber
WARNING - Check with installer to
make sure appliance has been ground-
ed to avoid possible electrical shock.
Be sure you read the following IMPOR-
TANT PERSONAL SAFETY INSTRUC-
TIONS before you start to use this
washer.

IMPORTANT PERSONAL SAFETY INSTRUCTIONS
WARNING - To reduce the risk of fire, electric shock, or injury to persons using this appli-
ance,follow basic precautions,including the following:
1. Read all instructions before using the appliance. 4. Befbre the appliance is removed from service or
discarded, remove the door to the washing corn-
2. To avoid the possibility of fire or explosion: partment.
a. Do not wash items that have been previously
cleaned in,washed in, soaked in, or spotted x_th 5. Do notreach into tlle appliance if the agitator is
gasoline, dry-cleaning solvents, other flammable moving.
or explosive substances as they give off vapors 6. Do not install or store this appliance where it will
thatcould ignite or explode, be exposed tothe weathen
Any material on which you have used a cleaning 7. Do not tamper _th controls.
solvent, or whichis saturated with flammable 8. Do not repair or replace any part of the appliance
liquids or solids, should not be placed in the or attempt any serx@ing unless specifically recom-
washer until all traees of these liquids or solids mended in published user-repair instructions that
and their fumeshave been removed, you understand and have the skills to car D, out.
There are many highly,flammable items used in 9. The agitator should not be removed. If the agita-
homes, such as: acetone, denatured 'alcohol, tor is removed,it must be replaced by pushing
gasoline, kerosene, some liqnid household down completely and the locking screw tightened
cleaners, some spot removers, turpentine, before the washer is operated.
waxes and w_ removers. 10. This appliance must be properly grounded. Never
b. Do not add gasoline, dD_-eleaning solvents, or plug the appliance cord into a receptacle which is
other flammable or explosive substances to the not grounded adequately and in aeeordanee with
wash water. These substances give off vapnrs local and national codes. See installation instrnc-
that could ignite or explode, tions for grounding this appliance.
e. Under certain conditions, hydrogen gas may be
produced in a hot water system that has not
been used for 2 weeksor more. HYDROGEN
GAS IS EXPLOSIVE. If the hot water system
has not been used for such a period, before Save These Instructions
nsiug a washing machine or combination wash- Appliances with tile ® symbol on the data plate have
er-dryer, turn on all hot water faucets and let the been listed with Underwriters'Laboratories, Inc
water flow from each for several minutes. This Those with a CSA Monogram on the data plate have
u,ill release any accumulated hydrogen gas. As been certified by the CSA Testing Laboratories as corn-
the gas is flammable,do not smoke or use an plying with Canadian Standards Association require-
open flame during this time. ments.
3,Do not allow children to play on or in the appli- Nevertheless,as with any' equipment using eleetrlcit
ante. Close supervision of children is necessary' and haying moving parts, there are potential hazard_
when the appliance is used near children. To use this appliance safel5; the operator shoul_
become familiar with the instructions for operation
the appliance and always exereise care when using it.
PA(

USING LAUNDRY ADDITIVES
Bleach
Add liquid chlorinebleach tothe dispenser
before adding the clothes.
When using this bleach, carefully measnre the recom-
mended amonnt of bleach. General recommendations
are 1/8 cnp for each 2 gallons of wash water. Amount of
wash water in: EX. SMALL I0 gallons (8 Imperial
gallons; 38 liters); SMALL -1'2 gallons (10Imperial ,_ -oo
gallons; 45 liters); MEDIUM 14 gallons (12 hnperial ....
g_dlons; 53 liters); LARGE I7 gallons (14hnperial
gallons; 64 liters); EXTRA LARGE 19 gallons (16
hnperial gallons; 72 liters),
Select water level, water temperature, desired cycle
and start washer. Dilutechlorine bleach as return- """
mended by the bleach manufacturer (generally 4
parts water toIpart bleach). A few moments a{}er
the washing action starts, lif} the lid and pour the dilut-
ed bleach solution around the agitator. Then close the
lid immediately and re-start the washer.
Be careful whenever you use liquid chlorine
bleach. It is a powerful"chemical and ean cause
fabric damage, such astears or color loss, ifnot
used properly. Do not pour directly onfabrics.
Always dilute with water. Wipe up spills with a
paper towel.
Non-Chlorlnebleach m_v be added with the deter-
gent. Follow the instructions on the package. If used
improperly; fabric damage may occur, such as color loss.
Fabric Softener
When using rinse-added fabdc softener, add the rec-
ommended amount to the cup located in top of the agi-
tator. Tile cup may be lifted out for fiIIing. Add warm
water to bring liquid level to the indicated FILL LINE
in the cup, Diluted fabric softener will automatically be
added to the rinse. (Always dilute fabric softener
with water.)
Do not interrupt the spin follo_dng the wash cycle
because the softener will go into the washtub at the
wrong time.
The area in and aronnd the dispenser cup should be
flushed and cleaned with hot water and a soft brush
periodically.
PAGE 2

Detergent
Useeither liquid or granular lann&ydetergent. Add
measured amount of detergent to washtub before
loading.
Read the manufacturer's instructions and usethecor-
rect amount. Most instructionsare for washing an "aver-
age" load. If the size of theload is extra large, the degree
of soil is heavier than average and the water is harder
than 6 grains per gallon,more detergent should be used.
Wipe up any spills of liquid laun&ydetergent on the
washer.
LOADING THE WASHER
For best results,add measured amount ofdeter-
gent to washtub before adding the sorted clothes
load.
Put &y, unfolded clothes loosely in the tnb, up to the
top row of holes for a maximum load. Do not pack or
wrap items around the agitator. See MAYTAG
LAUNDERING GUIDE for suggestions on sorting.
Be sure to empty all pockets, mend any holes or tears
and pretreat stains, spots and hea,fily soiled areas.
PAGE3

OPERATING INSTRUCTIONS
WATER LEVEL WASH • RINSE TEMPERATURE
JEpENDABLECARE HEAVY #UTY 2 SPEED SUPER CAPACITY
_Htltl_S Illat_ U(II
Select Water Level Select Wash/Rinse Water
Turn the selector knob to the setting that matches the Temperature
size of the load. Tnm the selector knob to the water temperature
The pre-set selector knob (not on all models) can be desired.
set to four or five distinct settings depending on the HOT/COLD - Wash water will be the teinperatnre of
model- EX. SMALL, SMALL,MEDIUM,LARGE or the water coining from the hot water faucet. Rinse
EX. LARGE. water will be cold. Use this setting for heavily
The infinite selector knob (not on all models) can be soiled whitesand colorfast items.
moved to each water level or any point in between. WARM/WARM -Wash water will be a nfixture of
If more water is needed once the fill is complete, move water coming from the hot and cold water _ancets.
the knob to Reset, then to the desired setting. Rinse water will be the same, except when the perma-
nent press cycle is selected; then it will antomatieally
For best washing results, clothes nmst cirenlate freely, be cold. Use this setting for delieates and for col-
If too Tittle water is used, poor cleaning, linting and ored items when a warm rinse following the wash
excessive wear may result. Use the following as a gnide is preferred.
to select the proper water level: WARM/COLD - Wash water will be a mixture of
Ex. Sm_dl - 1/4 fllll ofclothes, water coming from the hot and cold water lancets.
Small (not on all models) - 1/4 to 1/3 ihll of clothes. Rinse water will be cold. Use this for items with
moderate soll level and colored items.
Medium 1/3 to 1/2 fnll of clothes. COLD/COLD - Wash and rinse water _qll be the
Large 1/2 to 3/4 fi_llof clothes. temperature of the water eonfing from the cold water
Ex. Large- 3/4 to fnll of clothes, faucet. Use this setting to minimize fading of
brightly colored items and shrinkage of washable
NOTE: When laundering permanent press items or woolens.
items of delicate construction, washable woolens or NOTE: \Vater below 65°F is too cold to dissolve and
loosely knit items, never use less than the MEDIUM activate granular laund Udetergents.
setting. This will minimize shrinkage, wrinkling and
pulling of seams.
NOTE: If you experience problems selecting the correct water temperature, or cycle,or starting the
washer, refer to page 8 for additional information before calling for service.
PAGE 4

Q
_EGULAR FABRICS FERMANENT pRESS
OFF HEAW
accordm_to modd
Select Cycle and Time Presoaking:
The SOAK ONLY cycle (not on all models)is used to
Push in the cycle control knob and turn clockwise to soak heavily soiled or stained items for as long as
the proper cycle and wash time. desired. The washer does not advance automatically
Washing: into a wash cycle.
The HEAVY cycle is designed to wash very soiled To use the SOAK cycle turI1 the control knob to
loads,the NORMAL cycle is for average soiled start. The washer will fill, agitate for approximately 3
loads and the LIGHT cycle should be selected for minutes and soak until the control knob is advanced into
slightly soiled loads, a wash cycle or spirl and drain. Generally, soak periods
For REGULARFABRIC loads, turn the eontrol knob up to 30 minutes are sufficient for most loads
to 19 minutes for a HEAVY cycle; to 8 minutes tot a (overnightsoaking is not necessary or reeom-
NORMAL cycle; and to 5 minutes for a LIGHT cycle, mended). If following the soak with a regular wash, use
Fur PERMANENT PRESS loads, tnm the control up to 50% more than the usual amount of detergent or
knob to 10 minutes tot a HEA\q(cycle to 7 minutes use a presoak product such as Biz° in addition to the
for a NORMAL cycle; and to 5 minutes for a LIGHT regular amount of detergent.
cycle. Due to the extra cool down rinse whicb mini- °Brand,ta,ne_areb'adellta,'k_oflh_r,_pectivemanufitctI*n_l:_
mizes wrinkling,this cycle can also be used for non-
permanent press items when additional rinsing is NOTE: If the washer stops during the spin,it may
needed, be due to an unevenly distributed load. If this hap-
pens, push in the control knob,open the lid, redis-
For DELICATES, washable woolens or "hand-wash tribute the load,close the lid and pull out the control
able" items, turn the control knnh to 8 minutes lbr a knob.
NORMAL c}ele; and to 5 ininutes for a LIGHT cycle.
NOTE: The washer is antomatieaIIy programmed to
assure proper agitation and spinning for each load
type. REGULAR FABRICc}c es will proxide a fast
wash/spin speed. PERMANENT PRESS will have a
fast wash/spin speed along with a cool-do,am rinse.
DELICATE cycles x_dllhave a gentle wash and slow
final spin speed.
PAGE 5

Start the Washer MAINTAINING THE
Pulloutthee>lecontrolkuohtosta,tl,ewasl,WASHER
will hear water entering the wash tub.
The washer will fill to the selected water level _x4ththe • Turn off the water faucets after finishing the day's
selected wash water temperature. After filling, it will washing. This will shut off the water supply to the
agitate for the selected nmnber of minutes, washer and prevent the unlikely possibility" of dam-
age from escaping water.
The washer will pause briefly throughout each
cycle. These pauses are normal.• Clean the control panel with a sol} damp cloth and
glass cleaner. Do not use any abrasive powdersor
This washer is designed so that it will not agitate or spin cleaning pads.
when the lid is open. It will, however, fill with the lid
open so water is available for pretreating stains or dilut- • Clean the cabinet with soap and water followed with
ing fabric softener, an appliance wax, if desired.
Should the lid be opened during a cycle, the washer• The SELF-CLEAN LINT FILTER is located under
I will stop; when the lid is dosed and the control knob is the agitator on the bottom of the washtub. The lint
pulled out, the washer will resume its cycle at the point filter in this washer cleans itself. During the wash
it was interrupted, and rinse portion of the cycle, lint is collected on the
filter. The filteristhen flushed automatically during
Indicator Lights (not on ell models) the spin and drain.
Depending on the model the washer will have either a
SOAK light or an ON light. The ON light stays lit
throughout the entire cycle indicating the washer is
operating. The SOAK light is on during the soak cycle. STORING THE WASHER
Washers can be damaged if water is not removed from
hoses and internal components before storage.
Prepare the washer for storage as follows:
• Select NORMALcycle on Regular Fabrics and add
one cup of bleach or white vinegar to a full load of
water without clothes. Rut, the washer through a
complete cycle.
• Turn the water faucets off and disconnect the inlet
hoses.
•Advance the cycle control knob to the spin of
Regular Fabrics and lower drain hose to drain aW
water that may be in the drain hose.
• Disconnect the washer from the electrical supply
and leave the washer lid opento let air circulate
inside the tub.
PAGE6

CYCLE DESCRIPTIONS
Fill Fill Fill
WASH \VASH "WASH (Gentle Agitation)
SPIN & DRAIN SPIN & PARTIAL DRAIN SPIN & DRAIN
SPRAY RINSE Fill with cold water SPRAY RINSE
SPIN & DRAIN AGITATE SPIN & DRAIN
Fill SPIN & DRAIN Fill
DEEP RINSE&AGITATE Fill with cold water DEEP RINSE& AGITATE
SPIN & DRAIN DEEP RINSE & AGITATE SPIN & DRAIN
SPRAY RINSE** SPIN & DRAIN SPRAY RINSE**
FINAL SPIN SPRAY RINSE °° FINAL SPIN (Slow)
FINAL SPIN
Special Cycles {not on all models)
SOAK ONLY
Fill
AGITATE
SOAK (infinite)
*Thecyclesequenceisthe sameforHEA\_, NOIRMAL,LIGHT,DELICATESandKNITS;however,the total
cycletime willvaryandthe wash/spinspeedmayva_'.
_°Under certain conditions this spray rinse may not occur.
INOTE: The washer will pause briefly" throughout each cycle. These pauses are normal. I
TOTAL WATER USAGE
Regular Cycle Permanent Press cycle
EXTRA SMALL .......................... &pprox. 24 gallons ....................................... Approx. 30 gallons
(20 Imperial gallons; 9l liters) ('25 Imperial Gallons; 114 liters)
SMALL ................................ Approx. 28 gallons ....................................... Approx. 36 gallol_s
(23 Imperial galhms; I06 liters) (30 Imperial gallons; I36 liters)
MEDIUM .............................. Approx. 32 gallons ....................................... Approx. 4'2 gallons
{27 hrlperial gallons; 121 liters) (3,5Imperial gallons; 159 liters)
LARGE ................................ Approx. 36 gallons ....................................... Approx. 48 gallons
(30 Imperial gallons; 136 liters) (40 Imperial gallons; 182 liters)
EXTRALARGE ......................... Approx. 40 ga]Ions ....................................... Approx. 54 gallons
(33 Imperial gallons; i51 liters) (45 Imperial gallons; 204 liters)
PAGE7

BEFORE YOU CALL FOR SERVICE
Check these points if your washer...
Plug cord into live electrical outlet.
Cheek fuse or reset circuit breaker.
• Tun] the control knob to proper cycle and pull knob out to stalt the washer. If
equipped with buttons, be sure they are fully depressed.
• Turn both t;ancets on fidly:
• Straighten inlet hoses.
• Hose filter screens plugged. Disconnect hosesand clean screens.
• Check fuse or reset circuit breaker.
• Turn the control knob to proper cycle and pull knob out to start the washer. If
equipped with buttons, be sure they are tully depressed.
• Close lid and pull knobout tostartthewashen For your safety.
washer will notagitate or spin unless the lid is dosed.
• The washer is equipped _ith a lid switch failure detector. If the lid switch should
malfunction, the detector will stop operations for your safety'. Call for sea,ice.
• Olt:-balanee load. Redistribute the load evenly, close the lid and pull knob out. Check
for leveling. Be sure water level is acceptable for load size.
• Check fuse or reset circuit breaker.
• Straighten hoses. Ehminate kinked hoses. If there is a drain restriction, call for serdce.
• Close lid and pull knob out to start the washer. For your safety, washer will not
agitate or spin unlessthelid is closed.
• Suds lock -caused bv too much suds. Rewash without detergent. Use correct
amount of a low-sudsing detergent.
• The washer isequipped with a lid switch failure detector. If the lid switch should
malfimetion, the detector will stop operationsfor your safet)c Gall for service.
• Off-balance load. Redistribute the load evenly; close the lid and pull knob out. Cheek
for leveling. Be sure water level is acceptable for load size.
• Plug cord into live electrical outlet.
• Check fuse or reset circuit breaker.
• Turn the control knob to proper cycle and pull knob out to start the washer. If
equipped with buttons, be sure they are fully depressed.
• Close lid and pull knob out to start the washer. For your safety; washer will not
agitate or spin unless lid is closed.
• This may be a pause or soak period in the cycle. Wait briefly and it may start.
• The washer is equipped with a lid switch failure detector. If flm lid switch should
malfunction, the detectorv¢illstop operations for your safety,. Call for service.
• Make sure hose connections are tight.
• Make surc end of drain hose is correctly inserted and secured to drain facility.
• Extended soaking - soak for 30 minutesor less.
• Make sure washer is level and firm to the floor.
• Weak floors can cause vibration and walking.
• Turn both faucetson fully.
• If equipped with a temperature selector knob, be sure it is set directly on a temper-
ature setting and not between settings.
• Make sure temperature selection iscorrect.
• Make sure hoses are eom_ected to correct lancets and inlet connections. Be sure
water supply is regulated correctly'. Flush water line before t]lling washer.
• Cheek the water heater. It should be set to deliver a minimum 120°F (49°C)
hot water at the tap. Also check water heatercapacity and recovery rate.
• Hose filter screens plugged. Disconnect hose and clean screens
NOTE:Forfurther information contact MaytagCustomer Assistance: U.S.1-800-688-9900
Canada 1-800-688-2002
PAGE 8

AUTOMATIC WASHER WARRANTY
Full OneYear Warranty
For one (1) year from tile date of original retailpurchase, any part which fails in normal home use _411be repaired or
replaced free of charge.
Limited Parts Warranty
After the first year from the date of original retail purchase through the time periods listed below, the designated parts which
fail in normal home use x_411be repaired or replaced ti'ee of charge for tile part itself, x_-iththe owner paring all other costs,
including labor.
Second Year- Allparts.
Third through Fifth Year - The drive motor. All parts of the solid state controls (if so equipped).
Third through Tenth Year -Allparts of the transmissionassembly.
AdditionalLimited Warranty Against Rust
Should an exterior cabinet, including the top, lid, and baseframe, rust during the five year period starting from the
date of original retail purchase, repair or replacement will be made free of charge during the first year. After the first
and through the fifth year, repair or replacement _xdllbe made free of charge for the part itself, with the owner pay-
ing all other costs, including labor.
This full warranty and the limited warranties applywhen the apphanee is located in the United States or Canada. Appliances
located elsewhere are covered by the limited warranties only, which include parts which fail during the first year.
To Receive Warranty Service
To locate an authorized selMce company in your area, eoutact the iVla)_tagdealer froin whom your appliance was purchased or
call Maytag Customer Service. Should you _ot receivesatisfactoD, u.arran_ service,call or uMte:
Maytag Customer Assistance
c/o Maytag Customer SelMee
RO. Box 2370
Cleveland, TN 37320-2370
US 1-800-688-9900
CANADA 1-800-688-2002
When contacting Ma_ag Customer Service be sure to pro\4de the model and serial immber of your appliartce, the name and
address of the dealer from whom you purchased the appfiance and the date of purchase.
This Warranty givesyou specific legal rights, and you may alsohave other rights which va_" from state to state.
Should you still ha_e a problem, write to: Major Appliance Consumer Action Program, 20 North Wacker Drive, Chicago,
illinois 60606. MACAP is an industJ Tsponsored but independent group of consumer experts who receive and act on complaints
from appliance owners.
NOTE: When writing about an unsolved service problem, please include the following infimnation:
(a)"fimr name, address, and telephone number;
(b) Model number and serial number (found on control panel cover) of your appliance;
(c) Name and address of your dealer and date the appliance was bought;
(d) Aclear description of the problem )ou are having;
(el Water hardness,detergent brand and amount, water temperature and cycle used.
CONSUMER PUBLICATIONS
For additional information on laundering and purchasing other major ai3plianees, order the following booklets fi'om Maytag at
the prices indicated. Please send your name, address, booklet title, form number and payment to: Maytag, Consumer Education
Department, Olle Dependability Square, Newton, IA 50'208. Allow 6-8 _eks ibr deliveu,.
The Facts of the Lauud_- 181YG ........................................................................................ 50c
Stain I/ernowd Guide -- 19YG ................................................................................................. 50¢
Choosing the Right Detergent -- IS4YG ................................................................................ 50e
Special Baby, Special Clean-up --191 YG .............................................................................. 50¢
Appliance Bu}4ng Guides .......................................................................................................... 50¢ EACH
Washer -- 211YG; DDer -- 212YG; Dishwasher -- 213YG:
Hefrigerator -- 276YG; Cooking Appliance 277YG
PAGE9