Maytag LAT9766 User manual

AUTOMATIC WASHER W-1
Welcome ,,..i.............,. .............................. 1
Safety Instructions ................................ 2
Controls At A Glance ........................ 3-5 ""**
SpecialFeatures ..................................... 6 ;
Operating 1lips ........................................ 7 "
Care and Cleaning ................................. 8 "
Storing the Washer ............................... 8 ;
O
Water Use ................................................. 8B
Before You Call ................................. 9-10 O
Warranty .................................... Back Page •
Q
O
O
O
e
O
O
KEEPTHESEINSTRUCTIONSFORFUTUREREFERENCE

IModels: LAT9766
Welcome .......................................................................
Welcome and congratulations 2) Have proof of original date of purchase.
on your purchase of a Please attach your sales receipt here. Keep this
Consumer Rated No.1 Maytag information for your records (should you ever
Washer! Your complete satisfac- need warranty service),
tion is very importanttous.
Read this manual for best
results. It contains instructions
to acquaint you with proper
operating andmaintenancepro-
cedures.
In addition you will findaLaundering Tips guide
packed with your washer.Itcontainsinformation on rec-
ommendedlaundering procedures, stain removal and
special laundering situations.
m,db,_ = Save timeand money. If something should
go wrong, we suggest consultingthe
"Before YouCall" section in the back of this
book. It is designed to help you solve basic
problems before consulting a smwicer.
However, should you need assistance in the future it is
helpful to:
1) Have complete model and serial number identifica-
uon of your washer. This is located on a data plate on the
top edge of the control panel. Record these numbers
below for easy access.
For additional questions, please contact us:
Model Number Maytag Appliances Sales Company
Attn:CAIRsMCenter
P.O.Box 2370
Cleveland,TN 37320-2370
Serial Number 1-800-688-9900 USA
1-800-688-2002 CANADA
1-800-688-2080 TTY USA
(Mon.-Fri., 8am-8pm Eastern Time)
Internet: http://www.maytag.com
0_0_ O
For service and warranty information, see back page.
NOTE: In our continuing effort to improve the quality of
our appliances, it may be necessary to make changes to
the washer without revising this guide.
1

!i_i!i!iiiiill _i_i_!,!_ _ _ _ ,_ _ _ _ _ _ _ _i_i i_
Important Safety Instructions I_eo_r¢_ao_eeeo_ee_aoo_l_los
WARNING mTo reduce the risk of fire, explosion, electric shock, property damage or injury
to persons when using your appliance, follow basic precautions,including the following:
1. Read all instructions before using the appliance, been used for such a period, before using a wash- i
2. As with any equipment using electricity and having ing machine or combination washer-dryer, turn
on all hot water faucets and let the water flow
moving parts, there are potential hazards. To use
this appliance safely, the operator should become from each for several minutes. This will release
familiar with the instructions for operation of the any accumulated hydrogen gas. As the gas is
appliance and always exercise care when using it. flammable, do not smoke or use an open flame
during this time.
3. Do not install or store this appliance where it will be
exposed to the weather. 7. Do not reach into the appliance if the tub or agitator
is moving.
4. Install and level washer on a floor that can support
the weight. 8. Do not allow children to play on or in the appliance.
Close supervision of children is necessary when the
5. This appliance must be properly grounded. Never appliance is used near children.
plug the appliance cord into a receptacle which is
not grounded adequately and in accordance with 9. Do not tamper with controls.
local and national codes. See installation instruc- 10. Do not repair or replace any part of the appliance or
tions for grounding this appliance, attempt any servicing unless specifically recom-
mended in published user-repair instructions that
6. To avoid the possibility of fire or explosion: you understand and have the skills to carry out.
a. Do not wash items that have been previously
cleaned in, washed in, soaked in, or spotted with 11. Unplug power supply cord before attempting to ser-
gasoline, dry-cleaning solvents, other flammable vice your washer.
or explosive substances as they give off vapors 12. The agitator should not be removed. If the agitator
that could ignite or explode. Hand wash and line is removed, it must be replaced by pushing down
dry any items containing these substances, completely and the locking screw tightened before
Any material on which you have used a cleaning the washer is operated.
solvent, or which is saturated with flammable liq- 13. Store laundry aids and other material in a cool, dry
uids or solids, should not be placed in the washer place where children cannot reach them.
until all traces of these liquids or solids and their 14. Do not wash or dry items that are soiled with veg-
fumes have been removed, etable or cooking oil. These items may contain some
These items include acetone, denatured alcohol, oil after laundering. Due to the remaining oil, the
gasoline, kerosene, some liquid household clean- fabric may smoke or catch fire by itself.
ers, some spot removers, turpentine, waxes and 15. Do not use chlorine bleach and ammonia or acids
wax removers. (such as vinegar or rust remover) in the same wash.
b. Do not add gasoline, dry-cleaning solvents, or Hazardous fumes can form.
other flammable or explosive substances to the 16. Do not machine wash fiberglass materials. Small
wash water. These substances give off vapors particles can stick to fabrics washed in following
that could ignite or explode, loads and cause skin irritation.
c. Under certain conditions, hydrogen gas may be 17. Before the appliance is removed from service or dis-
produced in a hot water system that has not been carded, remove the door to the washing compart-
used for 2 weeks or more. HYDROGEN GAS IS ment.
EXPLOSIVE. If the hot water system has not 18. Do not sit on top of the clothes washer.
2

Controls At A Glance ...........................................
Step 0Select Cycle
Press the control knob in and turn clockwise to the desired cycle.
Pull the knob out to start the washer.
SENSI-CARE for Hand Washables is designed
for items labeled "hand washable." The wash- PRESOAK - soaks load for approx-
er alternates between periods of delicate wash imately 8 minutes to help remove
soils. The washer moves directly
and soak. Cycles available: into a Regular Heavy cycle.
NORMAL - approximately 10 minutes of wash
time •
LIGHT - approximately 6 minutes of wash time •
;•• REGULAR/DELICATE
• cycles share the same por-
ii i • • •
..... • • tion of the control knob.
• For regular fabrics, select a
SENSI-CARE • REGULAR/
extraOFF • cycle and press a REGU-
for Hand 14/ashab/es offrinse_ presoak DELICATE LAR WASH/SPIN SPEED
spin HEAVY
: button. For delicate fabrics,
wash/soak LIGHT/QUICK select a cycle and press a
i i LIGHT DELICATE WASH/SPIN
,NORMALi SPEED button. (See page 5
,OFF_I| rinse for detailed information.)
extra' _pirlCycles available:
on' HEAVY - approximately 13-
,oft15 minutes of wash time
spit
cool (2)(NORMAL) - approxi-
EASY CARE /OFF
LIGHTEAvYOFFSOAKONLY mately 10-12 minutes of
PERMANENT PRESS wash time
• I
••LIGHT/QUICK - approxi-
• I
•• •_ mately 7-9 minutes of
•,wash time
o
EASY CARE/PERMANENT PRESS is designed *®
to minimize wrinkles with a cool-down spray *•
rinse following the wash. Cycles available: %
HEAVY - approximately 10-14 minutes of SOAK ONLY - soaks heavily-soiled or
wash time stained items as desired. The user then
advances the control knob into a wash
6Y)(NORMAL) - approximately 7-9 minutes of cycle or spin and drain. A 30 minute
wash time soak is optimal. (Overnight soaking is
LIGHT - approximately 5-6 minutes of wash time not recommended.)
3

,i ii iii!_!_,_ ,_ ,ii i i_i'ii: _' ,,_,_i_iii_!!_'_"_,,_ _,,i,_'_,i_''_'_ .... !_i '"_'_'_'_,_ ,,
_Select Water Level
Step
INFINITESLIDECONTROL-movetheslideleverupor INFINITE WATER LEVEL
down tothe desired setting or any point in between. If more :
water is needed once the fill is complete, move the lever up
to reset and then to the proper setting. i
WATER LEVEL ;ETTING LOAD SIZE reset
Super 3/4 - Full SUPER
......................... °,°,o. *,°*._*°°°°° °°° .... .....*..... ,....
Large 1/2- 3/4 Full LARGE
°o°°o °°o°° ° °°°° ..,..... • ,.........• ......... ....... • ° ooo°°o °°°°o
Medium 1/3- 1/2Full MEDIUM i
• ...•.. ooo • °° ,...•.••. o°o° .....••, •°°°o° ,.........• ••°°° .,,,..•..
Small 1/3 Full SMALL :
o°o°°° o*°o° °°oo° ooo°°o
Mini 1/4Full MINI
o°°o • ••°°o°°°°o• °°°o° °°o°
REMEMBER: Items must circulate freely for best results.
Step _Select Water Temperature
Press the appropriate button to select the wash and rinse tem-
peratures.Follow the garment care label for best results. Use
the chart below as a guide. WASH /RINSE TEMP
WASH 'RINSE TEMPS LOAD TYPE
White and heavily soiled, HOT
Hot/Cold color-fast items COLD
°o °•• °• o°°,._ -
Delicate items,
Warm/Warm WARM
moderately soiled WARM
o •°°°°*.,..•.... ,,........ •,..,.....
........•,......•.. °°•° ° ••°
Moderately soiled,
Warm/Cold colored items; most Easy WARM
Care/Permanent Press items COLD ° !,
oo°oo••oo°_oooo°••o°_ °o••°°°o°• o°ooo••°o• oo°°••••°
Brightly colored, lightly COLD
Cold/Cold soiled items; washable COLD
woolens
• •°°°°•*•°o ° °•*°°° •°° °°••
REMEMBER: In wash water temperatures below 65 ° F, deter-
gents do not dissolve well or clean well.Care labels define cold
water as up to 85 ° E
4

Step _Select Options (if desired)
Press the appropriate button(s) to select one or more options. OPTIONS
OPTION USE
Provides a deep rinse plus an addi-
Extra tional rinse at the end of the cycle to EXTRA
Rinse more completely remove laundry RINSE _
additives, suds, perfumes, etc.
................................................................. NORMAL
Normal Provides a deep rinse and can be RINSE °
Rinse used for most loads......................................
• • •oeaot•• t•• • • • ••
********************** leo * O• I*OOlOleOOO ••O,I• I* •
Restricts hot water use to save water ENERGY
Energy heating costs. Select WASH/RINSE SAVER
Saver TEMP desired, plus press Energy
Saver button. NORMAL :*
.............................................. TEMP
*o***oo****oo*• oo• • •
Normal Does not restrict hot water use.
Temp
Step _:_Select WashSpin Speeds
Press the appropriate button to select the wash and spin
speeds to fit the fabric type. WASH /SPIN SPEED
WASH'SPIN SPEED DESIGNEDFOR
Regular/Fast Sturdy fabrics needing maxi-
mum water extraction REGULAR
.................................................................. FAST
Sturdy fabrics needing slower
Regular/Slow spin speed because of wrin- REGULAR
kling SLOW
Delicate fabrics needing slower
Delicate/Slow spin speed because of construe- DELICATE
tion SLOW
• •••••••,••I•••••,••,•Q.O•,QI,•,O,•eQ,,,,I,•,.
I•••I•••••••*O•••••• •
Step 0Start Washer
• Add detergent.
• Add load and close lid.
• Pull out control knob to start.
5

Special Features !
Indi Lights
cater O SOAK !
•SOAK - lights only during a "SOAK ONLY" cycle.
•WASH/RINSE - lights to indicate the washer is in O WASH/
a wash or rinse portion of the cycle. RINSE
• ON - lights whenever the washer is running. O ON
Chlorine Bleach Dispenser
The dispenser automatically dilutes liquid chlorine
bleach before it reaches your wash load. To use, follow
these steps:
1. Measure liquid chlorine bleach carefully, following
the instructions on the bottle.
2. Add the bleach to the dispenser before adding the
load. Avoid splashing or over-filling the dispenser. _2
NOTE: ooo_ o
Oooypo
• Never pour undiluted liquid chlorine bleach directly °Oo11°o
onto the load or into the wash tub. It is a powerful
chemical and can cause fabric damage, such as tear-
ing or color loss, if not used properly.
•If you prefer to use color-safe, non-chlorine bleach, Pour liquid chlorine bleach into
pour itinto the wash tub with your detergent.Do not bleach dispenser.
pour non-chlorine bleaches into the bleach dispenser.
Fabric Softener Dispenser
This dispenser automatically releases liquid fabric soft-
ener at the proper time during the rinse cycle. To use,
follow these steps:
1. Pour liquid fabric softener into the dispenser using
the amount recommended on the package.
2. Add warm water to the dispenser until it reaches the
MAX line.
NOTE:
• Do not stop the washer during the first spin. This will
cause the dispenser to empty too soon.
• Never pour fabric softener directly on the load. It will
leave spots and stains.
•Use the dispenser for liquid fabric softeners only. Pour liquid fabric softener into cup and
Clean the area in and around the dispenser frequently dilute with warm water.
with hot water, detergent and a soft brush.
6

Opera,,n,,,ps.......................................................
For detailed information on sorting, pretreating
stains, etc., see the enclosed Laundry Tipspamphlet.Loading
•Put dry, unfolded clothes loosely in the tub, up to the
Detergent top row of holes for a maximum load.
• Do not wrap large items like sheets around the agita-
• Use either liquid or granular laundry detergent. For tor.
best results, be sure detergent is added to the • Mix large and small items for bestcirculation. Wash
washer BEFORE the load and be sure wash water
isabove 65° E bulky items like blankets separately.
• When laundering permanent press items or items of
• Use the correct amount of detergent for the road size, delicate construction, washable woolens or loosely
soil level and water conditions. Use more detergent if knit items, never use less than the MEDIUM water
you have hard water and very soiled loads. level setting. This will minimize shrinkage, wrinkling
If you have soft water or a lightly soiled load, use less and pulling of seams.
detergent. (See manufacturer's instructions.) •For best results, add detergent to the washtub before
• Wipe up any detergent spills on the washer, adding the load.
• ....*., oo*oool • ...*Q.•*oo• •.....••* *oo•.....*o• •••Q...... • •or•...... •*• • ••....... ••oo• •......*. ••••....... • •to• •......*oo• •.
Additional Tips
• If the washer stops during the spin, it may be due to •This washer is designed so that it will not agitate or
an unevenly distributed load. If this happens, push in spin when the lid is open. It will, however, fill with
the control knob. open the lid. redistribute the load, the lid open so water is available for pretreating stains
close the lid and pull out the control knob. The spin or diluting fabric softener.
will resume at the point it was interrupted. • If you open the lid during a cycle, the washer will
• The washer will pause briefly throughout each cycle, stop. When the lid is closed and the control knob
These pauses are normal, pulled out, the washer will continue the cycle at the
point it was interrupted.
7

Care and Cleaning ...............................................
Turn off the water faucets after finishing the day's wash- Interior - hard water deposits may be removed, if
ing. This will shut off the water supply to the washer needed, using a recommended cleaner labeled wash-
and prevent the unlikely possibility of damage from er safe.. :
escaping water. Lint Filter - it is self-cleaning and requires no mainte-
Use a soft cloth to wipe up all detergent, bleach or other nance, The filter is located under the agitator on the
spills as they occur, bottom of the washtub. During the wash and rinse
portion of the
Clean the following as recommended: cycle, lint is col-
Control Panel - clean with a soft, damp cloth and glass lected on the ill-
cleaner. Do not use abrasive powders or cleaning ter. Then during
pads. the spin and
drain the filter is
Cabinet - clean with soap and water followed with an cleaned automat-
appliance wax, if desired, ically.
Storing the Washer ..............................................
Washers can be damaged if water is not removed from • Advance the cycle control knob to Spin and lower the
hoses and internal components before storage. Prepare drain hose to eliminate any water that may be in the
the washer for storage as follows: drain hose.
• Select the NORMAL cycle for regular fabrics and add • Disconnect the washer from the electrical supply and
one cup of chlorine bleach or white vinegar to a full leave the washer lid open tQlet air circulate inside the
load of water without clothes. Run the washer tub.
through a complete cycle.
• Turn the water faucets off and disconnect the inlet
hoses.
Water Use ..............................................................
PERMANENT PRESS CYCLE
REGULAR CYCLE
Approx. 40 gallons Approx. 43 gallons
Super (33 Imperial gallons; 151 liters) Super (36 Imperial gallons; 163 liters)
*oe.*e,elo*..Jo.oJto..eoe,,Io*..Jloe.oe,,ooo.,,*o*.. ,o.,e,e.oeto, ot*..llo.lo**..elo.ooeo.,eo...***,,*,,e
Approx. 36gallons Approx. 39 gallons
Large (30 Imperial gallons; 136 liters) Large (32 Imperial gallons; 148 liters)
Approx. 32 gallons Approx. 35 gallons
Medium (27 Imperial gallons; 121 liters) Medium (29 Imperial gallons; 132 liters)
Approx. 28 gallons Approx. 31 gallons
Small (23 Imperial gallons; 106 liters) Small (26 Imperial gallons; 117 liters)
Approx, 22 gallons Approx. 25 gallons
Mini (18 Imperial gallons; 83 liters) Mini (20 Imperial gallons; 95 liters)
8

Before You Call ...................................................
For problem laundry solutions (i.e.fabric damage, residue, tangling) and special laundry care proce-
dures, see the enclosed Laundry Tips pamphlet.
Check these points if your washer...
• Plug cord into live electrical outlet.
• Check fuse or reset circuit breaker.
• Turn the control knob to proper cycle and pull knob out to start the washer,
Won't Fill If equipped with buttons, be sure they are fully depressed.
• Turn both faucets on fully.
• Straighten inlet hoses.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
• • moQ •••• • • • • • • • , • • • • • • • • • • • • • •• •• • • • • • • • • • • ••• • • •• •• • • • • •• • • •, •,••••,•,• ••l••• i,• =o••,• •••J•l • • •••• • • • •• • • • • • •• • •• • • I••e• • •o • •l • •
• Check fuse or reset circuit breaker.
• Turn the control knob to proper cycle and pull knob out to start the washer.
: If equipped with buttons, be sure they are fully depressed.
• Close lid and pull knob out to start the washer. For your safety, washer will
:Won't Agitate not agitate or spin unless the lid is closed.
• The washer is equipped with a lid switch failure detector. If the lid switch
should malfunction, the detector willstop operations for your safety. Call for
;service.
• Unevenly distributed load. Redistribute the load, close the lid and pull knob
out. Check for leveling. Be sure water level is acceptable for load size.
• Check fuse or reset circuit breaker.
• Straighten drain hoses. Eliminate kinked hoses. If there is a drain restriction,
call for service.
Won't Spin • Close lid and pull knob out to start the washer. For your safety, washer will
or Drain not agitate or spin unless the lid is closed.
• Suds lock - caused by too much suds. Rewash without detergent. Use cor-
rect amount of a low-sudsing detergent.
• The washer is equipped with a lid switch failure detector. If the lid switch
should malfunction, the detector will stop operations for your safety. Call for
service.
i
9

• j• •
i ,
Check these points if your washer...
•Unevenly distributed load. Redistribute the load, close the lid and pull knob :
out. Check for leveling. Be sure water level is acceptable for load size. Z
•Plug cord into live electrical outlet.
• Check fuse or reset circuit breaker. :
• Turn the control knob to proper cycle and pull knob out to start the washer. If
Stops equipped with buttons, be sure they are fully depressed.
• Close lid and pull knob out to start the washer. For your safety, washer will
not agitate or spin unless lid is closed.
• This may be a pause or soak period in the cycle. Wait briefly and it may start.
• The washer is equipped with a lid switch failure detector. If the lid switch
should malfunction, the detector will stop fill operations for your safety. Call
for service.
ooo* ooe**eeo*** bocce.,,,,*. 6t.,,, ,,,e* *tee, 6eoe, .,,, ,,,e ,,,e• ,,tle,.eloe, O*Oe* leeeO I*eoe* Oleeeoo* OOOe*elO*OO eloe*e* O***OOe e*ee*
• Make sure hose connections are tight.
• Make sure end of drain hose is correctly inserted and secured to drain facility.
Leaks Water • Avoid extended soaking - soak for 30 minutes or less.
• Avoid overloading.
*o,.... o••,ee.•. •,,eo*, *t•,,,.,,ee*., eee,, oo.oe ee, eee, ,,e ,,e_,,,..** ,** ,O* OeO** COO,, OOlee*O e*OO*O, eOOO*e* •O*OeOe e*•eoQ*e•••e* O•
• Be sure washer is leveled properly as outlined in installation manual.
•Weak floors can cause vibration and walking.
Is Noisy •Be sure rubber feet are installed on leveling legs.
• Be sure locking nuts on legs are tight.
,coo,. teee.e • 60,eoe,l*** o*•• l*** ••• •****e*•, e**•• oo••• co••• •
• e o•• • ***._oo,,, oeeeoe_ .*oo.•..eoeeeeeo._ooo,• 6oto.. teoe,,eee,. .,,,.
• Turn both faucets on fully.
Fills with•Check temperature push button to be sure it is depressed completely.
the Wrong •Make sure temperature selection is correct.
Temperature • Make sure hoses are connected to correct faucets and inlet connections. Be
Water sure water supply is regulated correctly. Flush water line before filling washer.
• Check the water heater. It should be set to deliver a minimum 120°F (49°C)
hot water at the tap. Also check water heater capacity and recovery rate.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
• Check to see if the "Energy Saver" option is selected. If it is selected, press
"Normal Temp".
.. oeeeo.o*e. , o•***o_ ••oe*•** e•ee*_ee••eo _••ee•,e*_•ee*e *_•eeo _*•••_o •e***
Cycle Selector
Knob Advances • Extrarinse option is selected
Through "OFF"
Forfurther assistancecontact MaytagAppliances Sales Company, Maytag CustomerAssistance:
U.S.1-800-688-9900or Canada 1-800-688-2002
10

i,; i : , i i'i,i ¸, ; i /i i , ,_
I'IAutomatzc Washer Warranty eeoeooeeooe ooooeooa o ou o e go eoo
Full One Year Warranty
For one (1) year from the date of original retail purchase,any part whichfailsinnormal home use will be
repairedor replacedfree of charge.
Limited Parts Warranty
Afterthefirst yearfrom the date oforiginal retail purchase throughthetime periods listed below, thedesignat-
ed parts which fail in normal home use will be repaired or replaced free of charge for the part itself, with the
owner paying all other costs, including labor, mileage and transportation.
Second Year -All parts.
Third through Fifth Year -The drive motor.
Third through Tenth Year -All partsof the transmission assembly.
Additional Limited Warranty Against Rust
Should an exterior cabinet,including the top, lid, and baseframe, rust during the five year period starting from
the date of original retail purchase, repair or replacement will be made free of charge during the first year. After
the first and through the fifth year, repair or replacement will be made free of charge for the part itself, with the
owner paying all other costs, including labor, mileage and transportation.
This full warranty and the limited warranties apply when the appliance is located in the United States or Canada.
Appliances locatedelsewhere are covered by the limited warranties only, which include parts which fail during
:, the first year.
2_
,: : To Receive Warranty Service
To locatean authorizedservicecompanyin your area contactthe Maytag dealer from whomyour appliance waspro'chased;orcall Maytag
'AppliancesSalesCompany,MaytagCustomerAssistanceatthe number listedbelow.Shouldyou notreceivesatisfactorywarranty service,
pleasecall or write:
i
' MaytagAppliancesSalesCompany
'Attn:CAIRTM Center
RO. Box2370
Cleveland,TN 37320-2370
U.S.1-800-688-9900 Canada1-800-688-2002
U.S.customersusingTTYfordeaf, hearingimpaired orspeechimpaired,cal! 1-800-688-2080.
WhencontactingMaytagAppliancesSalesCompany,MaytagCustomerAssistanceaboutaserviceproblem,pleaseincludethefollowing:
(a) Yourname,addressandtelephonenumber;
(b) Modelnumberandserialnumber(foundontheback centerof the controlpanel)ofyourappliance;
(c)Nameandaddressofyourdealerandthedatetheappliancewaspurchased;
(d) Acleardescriptionofthe problem youare laaving.
(e) Proof ofpurchase.
What is not covered bythese warranties:
l. Conditions and damages resulting from any of the following: 3.Products purchased for commercial or industrial use.
a. Improper installation, delivery, or maintenance. 4.The cost of service or service call to:
b.Any repair, modification, alteration or adjustment not a. Correct installation errors.
authorized by the manufacturer or an authorized servicer, b. Instruct the user on proper use of the product.
c. Misuse, abuse, accidents, or unreasonable use. c. Transport the appliance to the servicer.
d. Incorrect electric current, voltage or supply.
e. Improper setting of any control. 5. Consequential or incidental damages sustained by any person
as a result of any breach of these warranties.
2. Warranties are void if the original serial numbers have been
removed, altered,or cannot be readily determined. Some states do not allow the exclusion or limitation of consequential
or incidental damages, so the above exclusion may not apply.
MAYTAG • One Dependability Square ° Newton, Iowa 50208
FormNo.548CMA PartNo.6 2301660 http://www.maytag.com JN LithoU.S.A.