Maytag MVWX500XL2 User manual

TOP-LOADING
HIGH EFFICIENCY
LOW-WATER WASHER
USE AND CARE GUIDE
GUIDE D'UTILISATION
ET D'ENTRETIEN DE
LA LAVEUSE HAUTE
EFFICACITI_ A FAIBLE
CONSOMMATION D'EAU
AVEC CHARGEMENT PAR
LE DESSUS
Table of Contents Table des mati6res
WASHER SAFETY ......................................................... 2
WHAT'S NEW UNDER THE LiD? ................................. 3
CONTROL PANEL AND FEATURES ............................ 4
CYCLE GUIDE ............................................................... 5
USING YOUR WASHER ................................................ 6
Using Laundry Product Dispensers...............................7
Starting YourWasher......................................................7
WASHER MAINTENANCE .................................................8
TROUBLESHOOTING ...................................................... 10
WARRANTY ........................................................................ 14
ASSISTANCE OR SERVICE .............................Back Cover
S¢_CURIT¢: DE LA LAVEUSE ...................................... 15
QUOI DE NEUF SOUS LE COUVERCLE? ................ 16
TABLEAU DE COMMANDE
ET CARACTC:RISTIQUES .......................................... 17
GUIDE DES PROGRAMMES ...................................... 18
UTlUSATION DE LA LAVEUSE .................................. 20
UtilJsation des dJstrJbuteurs de produits de lessive...21
Mise en marche de la laveuse......................................21
ENTRETIEN DE LA LAVEUSE ........................................ 23
DEPANNAGE ......................................................................25
GARANTIE ..........................................................................30
ASSISTANCE OU SERVICE .................Couverture artiste
Para una version de estas instrucciones en espaSol, visite www.maytag.com
Designed to use only HE High
Efficiency detergents.
Congue pour I'utilisation d'un
d6tergent haute efficacit6 seulement.
W10338687A
W10338688A =SP

WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injuryto persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not add gasoline, dry=cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[] Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. Ifthe hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
[] Do not reach intothe washer if the drum, tub or agitator is
moving.
[] Do not install or store the washer where itwill be exposed to
the weather.
[] Do not tamper with controls.
[] Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user=repair instructionsthat you understand and
have the skills to carry out.
[] See "Electrical Requirements" located in the installation
instructions for grounding instructions.
this time. SAVE THESE INSTRUCTIONS
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
2

WHAT'S NEW UNDER THE LID?
Cleaaiag with Less
Traditional agitator-style
washer Low-water washer
The most striking difference in your new washer is the low-water
washplate wash system. The washer automatically adjusts the
water level to the load size--no water level selector is needed.
Automatic Load Size Sensiag
Once you start the cycle, the lid will lock, and the washer will
begin the sensing process to determine the correct water level
for the load. This may take several minutes before water is
added. You will find a step-by-step description in the "Cycle
Status Lights" section.
You will hear the motor turn the basket in short pulses to
thoroughly wet the load. This low-water wash method uses
less water and energy compared to a traditional agitator-style
washer.
Choosiag the Right Detergent
Use only High Efficiency detergents. The package will be
marked "HE" or "High Efficiency." Low-water washing creates
excessive sudsing with a regular non-HE detergent. Using
regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer's instructions to determine the amount
of detergent to use.
Use only High Efficiency (HE) detergent.
Load garments in loose heaps evenly around the washplate.
Do not load garments directly over the center of the washplate;
when loaded, the center of the washplate should be visible.
Concentrated Cleaniag
Low-water cleaning means concentrated cleaning. Rather
than diluting detergent as done in an agitator-style washer,
this washer delivers the detergent directly to the soils.
Normal Sounds You Can Expect
At different stages of the wash cycle, you may hear sounds and
noises that are different from those of your previous washer.
For example, you may hear a clicking and hum at the beginning
of the cycle, as the lid lock goes through a self-test. There
will be different kinds of humming and whirring sounds as the
washplate moves the load. And sometimes, you may hear
nothing at all, as the washer determines the correct water level
for your load or allows time for clothes to soak.
As the washer dampens and moves the load, the level of the
garments will settle in the basket. This is normal, and does not
indicate that more garments should be added.
IMPORTANT: You will not see a washer basket full of water
as with your past agitator-style washer. It is normal for some of
the load to be above the water line.
3

CONTROL P EL FEATURES
AWASH CYCLE KNOB
Use the Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
O LiD LOCK
To allow for proper load sensing and spinning,
the lid will lock and the Lid Lock light will turn
on. This light indicates that the lid is locked
and cannot be opened.
If you need to open the lid, press START/PAUSE/
UNLOCK. The lid will unlock once the washer
movement has stopped. This may take several
minutes if the load was spinning at high speed.
Press START/PAUSE/UNLOCK again to resume
the cycle.
lid lock
start
@
pause
unlock
CYCLE MODIFIERS
When you select a cycle, its default modifiers will light up.
Not all cycles, options, and modifiers are available on all
models.
TEMP LEVEL
Temperature Control senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following the
garment label instructions, use the warmest wash water
safe for your fabric.
• Warm and hot water may be cooler than what your
previous washer provided.
• Even in a Cool water wash, some warm water may
be added to the washer to maintain a minimum
temperature.
SOIL LEVEL
Soil Level (wash time) is preset for each wash cycle.
For most loads, use the Soil Level that is preset with
the cycle you have chosen. For heavily soiled and sturdy
fabrics, press SOIL LEVEL to select more wash time,
if needed. For lightly soiled and delicate fabrics, press
SOIL LEVEL to select less wash time, if needed. Lower
Soil Level setting will help reduce tangling and wrinkling.
SPIN SPEED
This washer automatically selects the spin speed
based on the cycle selected. The preset speeds can be
changed. Not all spin speeds are available with all cycles.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds mean less wrinkling, but will leave
your load more damp.
O
O
CYCLE OPTIONS
When you select a cycle, its default options will light up.
NOTE: Not all cycles, options, and modifiers are available
on all models.
EXTRA RINSE
This option can be used to automatically add a second
rinse to most cycles.
Button Sounds:
Press and hold EXTRA RINSE for 3 seconds to turn the
button sounds on or off.
FABRIC SOFTENER
This option must be selected ifusing fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time in the rinse for even distribution.
You may also add or remove options for each cycle. Not all
options can be used with all cycles, and some are preset to
work with certain cycles.
CYCLE STATUS LIGHTS iNDiCATOR
The Cycle Status Lights shows the progress of a cycle. At
each stage of the process, you may notice sounds or pauses
that are different from traditional washers.
SENSING
When the Start/Pause/Unlock button is pressed,
the washer will first perform a self-test on the lid lock
mechanism. You will hear a click, the basket will make
a slight turn, and the lid will unlock briefly before locking
again.
Once the lid has locked the second time, the washer will
use short, slow spins to estimate the load size. These
sensing spins may take 2 to 3 minutes before water is
added to the load and you may hear the hum of these
spins. If the sensing light is on, the washer is working
properly. You will hear the motor turn the basket in short
pulses to thoroughly wet the load. The washer will then
move the load briefly, pause to allow water to soak in to
the load, and resume adding water. This process may
repeat until the correct amount of water has been added
for the load. You may also hear water flowing through the
dispenser, adding detergent to the load.
NOTE: Avoid opening the lid during sensing. The sensing
process will start over when the washer is restarted. The
sensing light may also come on during the Wash portions
of the cycle. This is normal.
4

WASH
Youwill hearthe motor and washplate moving the load.Unlike
traditional washers, the load is not covered with water.Low-water
cleaning means concentrated cleaning. Ratherthan diluting detergent
asdone in anagitator-style washer,this washerdeliversthe detergent
directlyto the soils. The motor sounds may change at different stages
in the cycle. The wash time is determined bythe selected soil level.
RINSE
Youwill hearsounds similarto the wash cycle asthe washer rinses
and movesthe load.You may hearthe motor turning on briefly
(short hum) to move the basket while filling. Fabric softenerwill be
added if the Fabric Softener option was selected. Some cycles use
spray rinsing.
SPIN
Thewasher spins the load at increasingspeeds for proper water
removal,based on the selected cycle and spin speed.
DONE
Once the cycle is complete, this light will come on. Remove
the load promptly for best results.
CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the load
being washed.
Not all cycles and options are available on all models.
Items to Cycle: Wash/Rinse Soil
wash: Temperature: Leveh
Sturdy fabrics, Power Hot/Cold High Extra Heavy
colorfast items, Wash Warm/Cold No Spin Heavy
towels, jeans Cool/Cold Medium
Cold/Cold Light
Heavily soiled Whites Hot/Cold High Extra Heavy
white fabrics Warm/Cold Low Heavy
Cool/Cold No Spin Medium
Cold/Cold Light
Large items Bulky Hot/Cold High
such as sheets, Warm/Cold Low
sleeping bags, Cool/Cold No Spin
small comforters Cold/Cold
jackets, small
washable rugs
Cottons, linens, Normal Hot/Cold High
and mixed Warm/Cold No Spin
garment loads Cool/Cold
Cold/Cold
No-iron fabrics, Wrinkle
cottons, perm Control
press, linens,
synthetics
Machine-wash Hand
silks, hand- Wash
wash fabrics
Swimsuits and Rinse
items requiring & Spin
rinsing without
detergent
Hand-wash Drain
items or & Spin
dripping wet
items
No clothes in Clean
washer Washer
with
Affresh T','
Available
Options:
Extra Rinse
Fabric Softener
cydeoeta,s:
Use this cycle for extremely soiled
garments. Water-level sensing process
may take longer for some items than for
others because they will absorb more
water than other fabric types.
Extra Rinse
Fabric Softener Extra Rinse is a default option, but may be turned off. For maximum soil removal
use liquid chlorine bleach.
Extra Heavy
Heaw
Medium
Light
Extra Heavy
Heavy
Medium
Light
Extra Rinse
Fabric Softener
Extra Rinse
Fabric Softener
Use this cycle to wash large items such
as jackets and small comforters. The
washer will fill with enough water to wet
down the load before the wash portion
of the cycle begins, and uses a higher
water level than other cycles.
Use this cycle for normally soiled cottons
and mixed fabric loads. This cycle features
aspray rinse.
Hot/Cold High Extra Heavy
Warm/Cold Low Heavy
Cool/Cold No Spin Medium
Cold/Cold Light
Extra Rinse
Fabric Softener Use this cycle to wash loads of no-iron fabrics such as sport shirts,blouses, casual
business clothes, permanent press, and
blends.
Hot/Cold High Extra Heaw
Warm/Cold Low Heavy
Cool/Cold No Spin Medium
Cold/Cold Light
Cold/Cold High
Low
No Spin
Extra Rinse
Fabric Softener Use this cycle to wash lightly soiled
garments indicating "Machine Washable
Silks" or "Gentle" cycle on the care label.
Place small items in mesh garment bags
before washing. This cycle uses a higher,
preset water level.
Combines a rinse and spin for loads
requiring an additional rinse cycle or to
complete a load after power interruption.
Spin speed is selectable; default is high.
This cycle uses a higher, preset water level.
Also use for loads that require rinsing only.
High
Low
No Spin
Hot/Cold High Extra Heavy
This cycle uses a spin to shorten drying
times for heaw fabrics or special-care
items washed by hand. Use this cycle to
drain washer after cancelling a cycle or
completing a cycle after a power failure.
Use this cycle every 30 washes to keep the
inside of your washer fresh and clean. This
cycle uses a higher water level. Use with
AFFRESH®washer cleaner tablet or liquid
chlorine bleach to thoroughly clean the inside
of your washer. This cycle should not be
interrupted.See "Cleaning Your Washer."
IMPORTANT: Do not place garments or other
items in the washer during the Clean Washer
with AFFRESHTM cycle. Use this cycle with
an empty wash tub.
5

USING YOUR WASHER
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
1, Sort and prepare your laundry
• Empty pockets. Loose change, buttons, or any small
object can pass under the washplate and become
trapped, causing unexpected sounds.
• Sort garments by recommended cycle, water temperature,
and colorfastness.
• Separate heavily soiled garments from lightly soiled.
• Separate delicate garments from sturdy fabrics.
• Do not dry garments if stains remain after washing,
because heat can set stains into fabric.
• Treat stains promptly.
• Close zippers, fasten hooks, tie strings and sashes,
and remove non-washable trim and ornaments.
• Mend rips and tears to avoid further damage to
garments during washing.
Helpful Tips:
= When washing water-proof or water-resistant items, load
evenly. See "Cycle Guide" for tips and more information
on using the Bulky cycle.
• Use mesh garment bags to help avoid tangling when
washing delicate or small items.
• Turn knits inside out to avoid pilling. Separate lint-takers
from lint-givers. Synthetics, knits, and corduroy fabrics
will pick up lint from towels, rugs, and chenille fabrics.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2, Load laundry into washer
Load garments in loose heaps evenly
around the washplate. Do not load
garments directly over the center
of the washplate; when loaded, the
center of the washplate should be
visible. Try mixing different sized
garments to reduce tangling.
m __
IMPORTANT: Garments need to move freely for best cleaning
and to reduce wrinkling and tangling.
6

Usiag Lauadry Product Dispeasers
Add HE detergent to dispenser
Detergent tray Fabric softener tray
Add a measured amount of HE detergent
into detergent tray. This tray holds 3 oz. (89 mL). Do not overfill
tray - adding too much detergent may cause detergent to be
dispensed into the washer too early.
IMPORTANT: Use only High Efficiency detergents. The package
will be marked "HE" or "High Efficiency." Low-water washing
creates excessive sudsing with a regular non-HE detergent.
Using regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer's instructions to determine the amount
of detergent to use.
Using Oxi or color-safe bleach:
If using an Oxi or color-safe bleach laundry boost product, add
to the bottom of the washer basket before adding clothes.
HELPFUL TIP: See "Washer Maintenance" for information
on recommended method of cleaning washer dispenser trays.
to dispenser
Do not overfill, dilute, or use more than 1 cup (250 mL). Do not
use color-safe bleach or Oxi products in the same cycle with
liquid chlorine bleach.
CD
CD
Fabric
Softener
Pour a measured amount of liquid fabric
softener into tray, always follow manufacturer's directions for
correct amount of fabric softener based on your load size. Close
dispenser drawer, then select Fabric Softener option.
IMPORTANT: Fabric Softener option must be selected to ensure
proper distribution at correct time in cycle. Do not overfill or
dilute. Overfilling dispenser will cause fabric softener to
immediately dispense into washer.
If Extra Rinse option is selected, fabric softener will be dispensed
into the last rinse.
It is normal for a small amount of water to remain in the dispenser
at the end of a cycle.
Starting Your Washer
Press POWER to turn on washer
power
Q
cancel
Make sure the dispenser drawer is closed completely, then
press POWER/CANCEL to turn on the washer.
7, Select cycle
bu% normal
I
white_
/
/
power_
clean \_. \\
washe[._N
with afffe sn N%
wrinkle control
hand
&spin
drain & spin
Turn cycle knob to choose your wash cycle. For more
information, see "Control Panel". 7

8, Select cycle modifiers
0 hot Q extra heavy
Q warm Q heavy 0 high
0cool 0 medium 0 low
0 cold Q light Q no spin
Once you select a cycle, the default settings for that cycle will be
lit. Press the cycle modifiers buttons to change the Temperature,
Soil Level, and Spin Speed, if desired.
NOTE: Always read and follow fabric care labels instructions to
avoid damage to your garments.
Hot
Some cold water is added to save
energy. This may be cooler than
your hot water heater setting.
Whites and pastels
Durable garments
Heavy soils
Cool - brights/darks
Warm water is added to assist
in soil removal and to help
dissolve detergents.
Colors that bleed
or fade
Cold
Warm water may be added to Dark colors that
assist in soil removal and to help bleed or fade
dissolve detergents. Light soils
9, Select cycle options
CD CD
CC)
Extra Fabric
Rinse Softener
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Extra Rinse. These can be turned off,
if desired.
NOTE: Not all options are available with all cycles.
0. Press START/PAUSE/UNLOCK
to begin wash cycle
start
@
pause
unlock
Press the START/PAUSE/UNLOCK button to start the wash
cycle. Filling is delayed for several minutes while load balance
is sensed. When the cycle has finished, the DONE indicator will
light up. Promptly remove garments after cycle has completed
to avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/PAUSE/UNLOCK; the lid will unlock once
the washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Then close
lid and press START/PAUSE/UNLOCK again to restart
the cycle.
If lid is left open for more than 10 minutes the water will
pump out.
Delay in water fill
Filling is delayed for 2 to 3 minutes to check for load unbalance.
You will hear the hum of the spin prior to filling. This is normal
operation.
WASHER INTENANCE
(wATEINLEMOSES
Replace inlet hoses after 5 years of use to reduce the risk of
hose failure. Periodically inspect and replace inlet hoses if
bulges, kinks, cuts, wear, or leaks are found.
I When replacing your inlet hoses, mark the date of replacement
on the label with a permanent marker.
fCLEANING YOUR DISPENSER TRAY
You may find laundry product residue leftover in your
dispenser trays. To remove residue, follow this recommended
cleaning procedure:
1. Pull tray out until you feel resistance.
2. Lift up slightly, and then continue pulling out.
3. Wash in warm, soapy water, using a mild detergent.
4. Rinse with warm water.
5. Air dry, or dry with atowel, then place back into slot.
IMPORTANT: Dispenser trays are not dishwasher safe.
8

CLEANING YOUR WASHER
Keep your washer as clean and fresh as your clothes. To keep
washer interior odor-free, follow this recommended monthly
cleaning procedure:
1=
2. Make sure the washer is empty.
Using recommended AFFRESH ®washer cleaner, add one
tablet to washer drum.
OR
If using liquid chlorine bleach, add 1 cup (250 mL) to liquid
chlorine bleach dispenser.
\
iMPORTANT: Do not add detergent to CLEAN WASHER
with AFFRESH TM cycle. Do not use more than recommended
amount of bleach to avoid damaging product over time.
3. Close washer lid.
4. Press POWER.
5. Select CLEAN WASHER with AFFRESH TM cycle.
6. Press START/PAUSE/UNLOCK.
NOTE: For best results, do not interrupt cycle. If cycle must
be interrupted, press POWER/CANCEL and run a Rinse
& Spin cycle to ensure cleaner or bleach have been rinsed
from washer.
To clean exterior:
1. Use a soft, damp cloth or sponge to wipe up any spills.
2. Use all-purpose surface cleaner, if needed.
iMPORTANT: To avoid damaging the washer's finish, do not
use abrasive products.
NON=USE AND VACATION CARE
Operate your washer only when you are home. If moving, or
not using your washer for a period of time, follow these steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer, to avoid flooding due to
water pressure surge.
f
1.
2.
3.
4=
5.
6.
7.
TRANSPORTING YOUR WASHER
Shut off both water faucets. Disconnect and drain water
inlet hoses.
If washer will be moved during freezing weather, follow
WINTER STORAGE CARE directions before moving.
Disconnect drain from drain system and drain any
remaining water into a pan or bucket. Disconnect drain
hose from back of washer.
Unplug power cord.
Place inlet hoses and drain hose inside washer basket.
Drape power cord over edge and into washer basket.
Place packing tray from original shipping materials back
inside washer. If you do not have packing tray, place heavy
blankets or towels into basket opening. Close lid and place
tape over lid and down front of washer. Keep lid taped until
washer is placed in new location.
rRE! NSTALLING/USI NG WASHER AGAI N
To reinstall washer after non-use, vacation, winter storage,
or moving:
1. Refer to "Installation Instructions" to locate, level, and
connect washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet hoses.
Turn on both water faucets.
Electrical Shock Hazard
Plug into agrounded 3 prong outlet.
Do not remove ground prong,
Do not use an adapter.
Do not use an extension cord,
Failure to follow these instructions can result in death,
fire, or electrical shock.
WINTER STORAGE CARE
IMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer. If storing or moving
during freezing weather, winterize your washer.
To winterize washer:
1. Shut off both water faucets, disconnect and drain water
inlet hoses.
2. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run
washer on RINSE & SPIN cycle for about 30 seconds
to mix antifreeze and remaining water.
3. Unplug washer or disconnect power.
2.
3. Plug in washer or reconnect power.
Run washer through BULKY cycle to clean washer and
remove antifreeze, if used. Use only HE High Efficiency
detergent. Use half the manufacturer's recommended
amount for a medium-size load.
9

TROUBLESHOOTING
Check the following
for proper installation
or see "Using Your
Washer" section
Clicking or metallic
noises
Gurgling or humming
Humming
Check the following for
proper installation:
Not enough water
in washer
Washer won't run
or fill, washer stops
working or wash light
remains on (indicating
the washer was unable
to fill appropriately)
k,
Feet may not be in contact
with the floor and locked.
Washer may not be level.
Load could be unbalanced.
Objects caught in washer
drain system.
Washer may be draining water.
The sensing light is on.
Washer not level.
Fill hoses not attached tightly.
Fill hose washers
-Drain hose connection
Check household plumbing
for leaks or clogged sink or drain.
Washer not loaded properly.
Load not completely covered
in water.
Check for proper water supply.
Front and rear feet must be in firm contact with floor, and washer
must be level to operate properly. Jam nuts must be tight against
the bottom of the cabinet.
Check floor for flexing or sagging. If flooring is uneven, a 3/4" (19 mm)
piece of plywood under your washer will reduce sound.
See "Level the Washer" in "Installation Instructions'.
Load garments in loose heaps evenly around the washplate. Do not
load garments directly over the center of the washplate. Adding wet
items to washer or adding more water to basket could unbalance
washer.
Wash smaller loads to reduce imbalance.
Use Bulky cycle for oversized, non-absorbent items such as comforters
or poly=filled jackets. See "Cycle Guide".
See "Cycle Guide" and "Using Your Washer" in this "Use and Care
Guide".
Empty pockets before washing. Loose items such as coins could fall
between basket and tub or may block pump. It may be necessary to
call for service to remove items.
It is normal to hear metal items on clothing such as metal snaps,
buckles, or zippers touch against the stainless steel basket.
It is normal to hear the pump making a continuous humming sound with
periodic gurgling or surging as final amounts of water are removed during
the spin/drain cycles.
You may hear the hum of the sensing spins after you have started the
washer. This is normal. Sensing spins will take several minutes before
water is added to the washer.
Water may splash off basket if washer is not level.
Tighten fill-hose connection.
Make sure all four fill hose flat washers are properly seated.
Pull drain hose from washer cabinet and properly secure it to
drainpipe or laundry tub.
Water can back up out of a clogged sink or drainpipe. Check all
household plumbing for leaks (laundry tubs, drain pipe, water pipes,
and faucets.)
Unbalanced loading can cause basket to be out of alignment and
cause water to splash off tub. See "Using Your Washer" for loading
instructions.
This is normal operation for an HE low-water washer. The load will not be
completely underwater. The washer senses load sizes and adds correct
amount of water for optimal cleaning. See "What's New under the Lid."
IMPORTANT: Do not add more water to washer. Adding water lifts the
garments off the washplate, resulting in less effective cleaning.
Both hoses must be attached and have water flowing to inlet valve.
Both Hot and Cold water faucets must be turned on.
Check that inlet valve screens have not become clogged.
Check for any kinks in inlet hoses, which can restrict water flow. J
10