Meari Bell 5S User manual

Bell 5S
QUICK GUIDE
ORIGINALITY DESIGN SMART - AND BEAUTIFUL

1
What's in the box
Bell 5S
Manual
Chime Kit
Pin
Bracket
Angle Wall Mount
Please consult this checklist for all parts.
Screwdriver
Screw (4 kinds)
A x 3 B x 3
C x 2
D x 1
3M

2
Description
Microphone
Reset
Button
SD card slot
Status Light
Speaker
Mini USB
External
power port
Lens
Power Port
Doorbell button
Status light
AC 12~24V
Press the button to activate the doorbell
Solid red light on: the camera is turning on or malfunctional
Blinking red light: awaiting WiFi connection (slowly blinking)
connecting the WiFi (quickly blinking)
Blinking blue light: currently connecting
Solid blue light on: the camera runs correctly
Captures sound for your video
Supports local SD Card storage (Max.256G)
Press and hold on for 5 seconds with pin to reset the
doorbell
Microphone
SD card slot
Reset

3
First turn off the power breaker at your fuse box for your existing
doorbell and mechanical chime.Ring your doorbell again to
confirm it is now off.
Find your mechanical chime that is a rectangular box,produces the
sound when your doorbell is pressed.It may(or may not)be mounted
immediately inside your FRONT door.And remove the cover.
OFF
ON
Mechanical Chime Installation
Step 1
Step 2
(Example of a
Mechanical Chime)

4
Slghtly unscrew both screw terminals and one hook from the Chime
Kit under each screw(It does not matter which color wire from the
Chime Kit connects to which screw).
Locate the Chime Kit included in the smart doorbell's packaging, and the
terminals on the inside of the chime.Connect one of the Chime Kit's
prongs to the transformer terminal(usually labeled TRANS, T, AC, or 0).
Connect the other prong to the chime's front terminal (usually labeled
FRONT, F1, or C1).Either prong on the Chime Kit can be connected to
either of the terminals on the chime.
Step 3
Mechanical Chime Installation

5
Using the included doubles sided tape,affix the Chime Kit to
your chime wherever there is space and replace the cover.Be
careful not to interfere with any of the chime's moving parts.
Ensure that the Chime Kit and wires DO NOT interfere with the
mechanical parts of the chime.Mount on the outside of the
chime if there is not enough room to mount inside.And replace
your chime's cover.
Step 4
Mechanical Chime Installation

6
Installation
Mode 1 Doorbell General Installation
Mode 2 Angle Wall Mount + Bracket + Doorbell Installation
1.Fix the bracket to the wall with the mounting screws
2.Install the camera in the bracket and lock it with the screw
3.Install the camera in the bracket and lock it with the screw
2.Fix the mounting bracket in the angle wall mount
1.Fix the angle wall mount to the wall
1
2

7
Turn the doorbell power back on at the fuse box.The light on the
doorbell button should turn on and after a few minutes become
red slowly.
Installation
ON

8
Connection
Download
CloudEdge is available for both iOS and Android OS. Search the name
'CloudEdge'in App Store or Google Play, or scan the QR-Code to
download the App.
Log in the CloudEdge, select "Add Device", and add the smart camera to
the App according to the screen tips(Make the smart camera close to the
router when configuring).
NOTE:If you need to re-select the WiFi network, please press and hold the "RESET"
button for 5 seconds, the device will restart, and the indicator will be flashing red.
Add device
ipad AndroidIOS
·Support
Download App(IOS&android)

Functions
Full-duplex audio
When the visitor push the doorbell button, you will get a call. You can see
and hear the vistor in your App from the doorbell if you answer.
Shared device
The doorbell device can be shared with friends, and friends can also preview
online. There is no limit to the number of sharing devices, but only 6 accounts
are supported for online preview at the same time.
Motion detection
Motion sensors will notify you when movement is detected.
Record
Record every moment using high capacity SD card storage.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
Daytime Night
9