Meari Snap 21 User manual

QUICK GUIDE
ORIGINALITY DESIGN SMART - AND BEAUTIFUL
BATTERY CAM
Snap 21

1
Please consult this checklist for all parts.
What's in the box
Type C cable
Solar panel (optional)
Camera
Power adapter
Screws
Solar panel
bracket (optional) Screws for solar
panel (optional)
Pin
Manual
Silicone plug (optional)

2
Description
Power Port
ON/OFF button
Status light
DC 5V/1A
Press the button for 3 seconds to turn on/off the camera
Solid red light on: network is malfunctional
Blinking red light: wait for network connection (slow)
connecting the network (fast)
Solid blue light on: camera is working correctly
Support local SD Card storage (Max.128G)
Press and hold on for 5 seconds to reset the camera
Reset
SD card slot
Battery 9600mAh rechargeable Li batteries
PIR
Lens
Microphone
Speaker
Type C
SD card slot
Reset
Status light
ON/OFF button

3
Installation
Camera Installation
1）Mark screws position with bracket；
2）Drill screw holes with a power drill；
3）Install expansion screws (with a hammer);
4）Use screws to fix the bracket on the wall.
①
④
30~40MM
6MM
②
③

4
Installation (Optional)
Solar Panel Installation
Sun
1) Please select a position with the most sunlight throughout the
year for your solar panel. The solar panel only needs a few hours of
direct sunlight to sufficiently power your camera daily. The amount
of energy that the solar panel can produce is affected by weather
conditions, seasonal changes, geographic locations, etc.
The Northern Hemisphere The Southern Hemisphere
The Ideal Angle=The Local Latitude + 5°
2) Mount the bracket with the
mounting template and the
screws provided in the package.

5
Installation (Optional)
Solar Panel Installation
3) Slot the solar panel into the
bracket and make sure the
security.
A
B
Adjusting control
4) Loosen the adjusting control
on the bracket and adjust the
angle of the solar panel to make
it receive direct sunlight, and
then re-tighten the adjusting
control to secure your setting.
A: Lock
B: Unlock

6
Installation (Optional)
Camera and Solar Panel Connection
1）Insert the silicone plug to the solar panel connector;
2）Connect the solar panel connector to the type c port of camera .

7
Connection
2.4GHz 5GHz
Please keep network available
Set up router
Download
iPad AndroidIOS
·Support
Download App(IOS&android)
SmartLife or Tuya Smart is available for both iOS and Android operation
system. Search the name "SmartLife" or "Tuya Smart" in App Store or Google
Play, or scan the QR Code to download the App.
You can select the App according to needs.
Please note that the device supports the 2.4GHz WiFi (doesn't support the
5GHz).
Please set the parameters of the router before connecting the WiFi network,
and record the SSID and password of your WiFi.

8
Registration
Registration process
Step 1
Step 2 Input a legal Email address and check the privacy agreement.
Then enter the verification code finish registration.
Open the App, click "Sign Up" to register.
If you already have an account, click “Log In” to log in.

9
Home Management
Step 3
Click "Me" > >"Home Management" >>"Create a home", and you can
customize the home name and related settings.

10
Device Adding
Click "Add Device" and then select the corresponding device icon
to add.
Step 4
Power on the device.
And then reset the camera and click “Next” on App.
Step 5

11
Device Adding
Note: 1) Camera only supports 2.4GHz WiFi network.
2) The number of bits in the SSID and passwords of the router should
not exceed 24 digits.
Select the WiFi network and input the password, and then click "Next".
Make sure that your phone has connected to a fluent and steady WiFi
already.
Step 6

12
Device Adding
Scan the QR code in your phone with the camera and click “Next”,
when the camera comes out "dong dong dong". And you can
complete the configuration about 30s.
Step 7
Scan the QR
code of device
When connecting, you should make sure your router, mobile and
camera are as close as possible. And you can DIY device’s name and
assign the room.
Step 8
Camera

13
Settings
In live view interface, click " ... ", and then you can set up the device
common functions.
Step 9
2021-12-22 17:59:40
Camera
70KB/S

14
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close
to the router, and if not, it is recommended to reset the device and add
it again.
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera,
but cannot change the configuration on the App, remove the camera,
and must be deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the
device again by the App.
Q: Why doesn't the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF
card can’t be identified when the Internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened;Message notification and
authority confirmation in the mobile phone system have been opened.
FAQ

15
Functions
Daytime Night
Record
Using SD card or Opening the Cloud-Storage Service, to keep recording for
every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
Two-way audio
When you see a visitor from the live view of camera, you can call and then
communicate with the visitor by your App function.
PIR
When someone passes by, an alarm will be triggered and sent to your phone.
Low battery alarm
You can set a low-battery alarm threshold in your phone App. The
threshold is set to a minimum of 10% and a maximum of 50%. When the
battery power of the camera is lower than the set threshold, the App will
have a reminder.
Motion detection
Support smart motion detection. The camera will detect movements, and
then send you push notifications and app alerts.
Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you with a
good vision.

16
Functions
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This equipment
must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter. End-users and installers must
be provide with antenna installation instructions and consider removing the no-
collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.