Meari Snap 8 User manual

2
Reset
SD card slot
RET SD
Power button
Micro USB
Microphone
PIR
Status Light
Camera
Speaker
Power Port
Power on/off
Status light
DC 5V±10%
Press the button for 3 seconds to turn on/off the camera
Red light solids on: the camera network is abnormal
Red light blinks: awaiting WiFi connection, or currently
connecting (faster blinking)
Blue light solids on: camera running correctly
Support local SD Card storage (Max.128G)
Press and hold on for 5 seconds to reset the camera
Reset
SD card slot
Red indicator solids on: battery is charging
Blue indicator solids on: charging completed
Charging
indicator
Battery capacity 6700mAh (Two 18650 lithium-ion batteries)

3
Mode 1 Bottom Bracket Installation
Mode 2 Side Bracket Installation
Install
1.Fix the bracket to the wall with the mounting screws
2.Install the camera in the bracket and lock it with the screw
3.Install the camera in the bracket and lock it with the screw
1.Fix the mounting bracket in the angle wall mount
2.Fix the angle wall mount to the wall
1
2