Meari Snap 6S User manual

QUICK GUIDE
ORIGINALITY DESIGN SMART - AND BEAUTIFUL
BATTERY CAM
Snap 6S

1
Please consult this checklist for all parts.
What's in the box
Bracket(B)
USB cable
Snap 6S Power adapter
Screws(2 kinds)x2 Manual
Bracket(A)

2
Description
Power Port
Power on/off
Status light
DC 5V±10%
Press the button for 3 seconds to turn on/off the camera
Red light solids on: the camera network is abnormal
Red light blinks: awaiting WiFi connection, or currently
connecting (faster blinking)
Blue light solids on: camera running correctly
Support local SD Card storage (Max.128G)
Press and hold on for 5 seconds to reset the camera
Reset
SD card slot
Red indicator solids on: battery is charging
Blue indicator solids on: charging completed
Charging
indicator
Battery capacity 9400mAh (Two 21700 lithium-ion batteries)
PIR Sensor
Lens
Microphone
Speaker
Micro USB
SD card slot
Reset
Charging indicator
Status light
Photosensitive

3
Install
Mode 1 Bracket (A) Installation
Mode 2 Bracket (B) Installation
2.Install the camera in the bracket and lock it with the screw
1.Fix the bracket on the wall
1.Fix the bracket on the wall with screws
2.Bring the camera closer to the bracket
0~90°
0~360°
After ajusting your camera angle,
please lock this screw

4
Download
Smart Life is available for both iOS and Android OS. Rearch the name 'Smart
Life'in App Store or Android Market, or scan the QR-Code to download the
App.
Set up router
The router supports the 2.4GHz WiFi (doesn't support the 5GHz).Before
connecting to the WiFi network,please set the parameters of the router,
and record the SSID and password of your WiFi.
Android
IOS
·Support
Download App(IOS&android)
Connect
2.4GHz 5GHz
Please keep network available

5
Registration process
Step 1 Open the Smart Life App, click "Register", read the "Privacy Policy"
and click "Agree" .
Step 2
Input a legal and valid Mobile number or Email address and click
"Continue". Input Verification Code, then log in the app.
Connect

6
QR Code Configuration
Open the Smart Life App, click "Create family", and you can customize
the Family name and related settings .
1
Continue to click "Security & Sensor" >> "Smart Camera",and then
choose"Add Device" or "+",ready to add camera.
2

7
QR Code Configuration
In "Add Device" this interface,continue to click "next step",and then you
should input your WiFi's passwords.
3
Note:
1) Camera only supports 2.4GHz WiFi network.
2) The number of bits in the ssid and passwords of the router
should not exceed 24 digits.

8
QR Code Configuration
In this interface,you should scan the QR code in your phone with the
camera,when the camera comes out "dong dong dong". And you can
complete the configuration about 30s.
4

9
QR Code Configuration
When connecting,you should make sure your router,mobile,and camera
are as close as possible.When camera added successffully,click " "
you could also DIY the camera's name.
5

10
In "Smart Camera" interface,click " ",you can set the camera common
functions.
Settings

11
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera,
but cannot change the configuration on the App, remove the camera,
and must be deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the
device again by the App.
Q: Why doesn't the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF
card can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened;Message notification and
authority confirmation in the mobile phone system have been opened.
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close
to the router, and if not, it is recommended to reset the device and add
it again.
FAQ

Daytime Night
12
Functions
Record
Using SD card or opening the Cloud-Storage Service, to keep recording for
every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
Full-duplex audio
You can see and hear the vistor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message
to your cell phone.
Low battery alarm
When the battery power is lower than your set, the App will send a
notification to your mobile phone.
Remote wake-up
The camera will be in a sleep mode to save power; you can have a preview
in App.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be
installed and operated in accordance with provided instructions and the antenna(s) used for
this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provided with antenna installation instructions
and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.