Measure-Quip AAVM-318 User manual

INSTRUCTION MANUAL
Flexible Thermo-Anemometer AAVM-318

1. Introduction
Congratulations on your purchase of Flexible Thermo-Anemometer AAVM-318.
This instrument, with proper care, will provide years of safe and reliable service.
2. Features
2.1 450mm Gooseneck detector is easy to measure the hard-to-reach areas.
2.2 Measures Air, Velocity and Temperature
2.3 Full 4-digit display of air velocity in m/s, ft/min, km/h, MPH and knots,
2.4 ºC/ºF Temperaturemeasurement via built-in thermistor
2.5 Data Hold and Min/Max Rec. functions
2.6 Low battery indication and Auto-Power off.
2.7 Complete with 9V battery and carrying case
2.8 Current Mode status will be saved after the unit is turned off
3. Specifications
Air Velocity
Units
Range
Resolution
Accuracy
m/s
1.00 - 30.00
0.01
±3% ±0.20 m/s
ft/min
196 - 5900
1
±3% ±40 ft/min
km/h
3.6 - 108.0
0.1
±3% ±0.8 km/h
MPH
2.2 - 67.0
0.1
±3% ±0.4 MPH
Knots
1.9 - 58.0
0.1
±3% ±0.4 knots
Temperature
Units
Range
Resolution
Accuracy
ºC
－10.0to 60.0
0.1
±1.5 ºC
ºF
14.0to140.0
0.1
±3.0 ºF
Size
Dimensions: 163 x 45 x 34(mm)
Display size: 26.7 x 25.4(mm)
Fan Diameter: 27.2(mm)
Weight: 257(g)

4. Meter Description
1 Vane impeller
2 Precision thermister
3 LCD display
4 Power key
5 Hold key / Backlight switch
6 Max and min key / Del Key
7 UINTS KEY / ºC / ºF switch
5. Operation
5.1 The meter ON or OFF
Press the Power button to turn the meter on or off.
5.2 Non Sleep Mode (Bypass the Auto Off)
The meter will automatically turn off after 15 minutes in the normal mode.
To turn off this function, when you first turn on the meter, press the button UNITS
button, a “disAP0” appears on the LCD, then release the UNITS key and the
automatic power off feature will be disabled.
5.3 Data Hold
Press the HOLD key to freeze the displayed reading. Press again to unlock the
display.
5.4 Max/Min
Press the MAX/MIN key and the reading will change from max, min, normal.
Press and hold the MAX/MIN button for about 3 seconds to clear and Stop the
MAX/MIN/ recording.
5.5 Measuring m/s,ft/min,km/h,MPH,knots
Press the UINTS key and the reading will change from m/s,ft/min,km/h,MPH,
KNOTS.
7
1
2
3
4
5
6

5.6 Select temperature units ℉OR ℃.
Turn on the meter first. Press the UINTS buttons and hold about for 3 seconds to
change temperature units.
5.7 The BACKLIGHT ON and OFF
Press and hold the HOLD key about for 3 seconds to turn on or off the backlight.
Measure-Quip Ltd | Merlin Way | Quarry Hill Industrial Estate | Ilkeston | Derbyshire | DE7 4RA
Tel: [phone] Email: [e-mail] Web: www.measure-quip.com