MED Associates ENV-025F28 User manual

instrumentation and software for research
SOUND ATTENUATING CUBICLE (SAC)
REPLACEMENT FAN
ENV-025F28
ENV-025FAC
INSTALLATION MANUAL
DOC-313
Rev. 1.0
Copyright ©2017
All Rights Reserved
Med Associates, Inc.
P.O. Box 319
St. Albans, Vermont 05478
Phone: [phone]
Fax: [phone]
www.med-associates.com

MED ASSOCIATES, INC.
REPLACEMENT FAN
- 1 - DOC-313 Rev. 1.0 Copyright © 2017
Med Associates, Inc.
CHAPTER 1 | INSTALLATION
To install the ENV-025F SAC replacement fan, first clip away the back of the white plastic rivet inside the
SAC. This will remove the fan from the inside of the SAC and the fan grill from the outside.
Align the replacement fan with the cable on the bottom and the side of the fan with the grill inside the
SAC. Using the four new plastic rivets secure the grill outside the SAC and the replacement fan inside
the SAC. The rivets should press in through the grill on the outside, the SAC wall and the back of the fan
on the inside of the SAC when all of the holes are aligned properly. This process may require some
force. A rubber mallet may be required.
APPENDIX A | CONTACT INFORMATION
Please contact Med Associates, Inc. for information regarding any of our products.
For Technical questions, email [e-mail].
For Sales questions, email [e-mail].
Visit our website at www.med-associates.com.