MediaTech MT853 User manual

User manual
MOTIVE
watch
GSM
MT853

2
EN
Overview
Introduction
Thank you for buying media-tech smartwatch GSM. Device supports smartphones
with Android 4.2.2 or higher operating system. In order to use all smartwatch functions
please download free application “SmartWatch MT853” using QRcode scan or down-
load manually from www.media-tech.eu website.
Battery status
Camera
LCD with
touch panel
USB socket
(for charging) Home button
Microphone
Menu icon Back icon
Dialer icon

3
EN
Installation steps
1. Remove battery cover
2. Install microSIM card (it is not nec-
essary, smartwatch can still make
phone calls via Bluetooth). Slide
hatch, open up, put microSIM card,
close, slide again to lock.
3. Install microSD card – slide mi-
croSD card into slot (it is not neces-
sary).
4. Install rechargeable battery.
5. Put back battery cover.
Power button Charger
socket
Camera
lens
Microphone
microSIM card slotmicroSD card slot

4
EN
Charging
Use USB cable and plug into USB char-
ger or USB port in PC computer. During
charging battery icon will animate. After
ca. 2 hours battery is full, battery icon ani-
mation is stopped.
Note! We recommend to perform at rst
three full charging cycle in order to format
built-in battery. If device is not used for
longer timer please charge it once a week
at least.
Power on/o
Press and hold home button for 3 seconds
to power on the device, repeat this action
to power o the device. When device is in
standby mode press once home button
to switch analog clock view, press again
to turn o LCD. When LCD is o press and
hold home button for 1 sec to resume
screen.
Analog clock view
Click in the middle of screen to change
analog clock type.
First steps
1. Fully charge device before rst use.
2. Power on the smartwatch and go to
the Bluetooth section. Enable search-
ing for Bluetooth devices.
3. Enable Bluetooth interface in your
smartphone and enable visibility for
unpaired devices.
4. Use smartwatch and select your smart-
phone on the list.
5. On both devices you should see the
same passcode. Click OK on both de-
vices to pair successful.
6. Now install“SmartWatch MT853”appli-
cation. Display QRcode on the smart-
watch (go to “menu/QuickResp” and
use your smartphone to scan this code,
next open scanned link, your web

5
EN
browser will automatically download
installation le.
7. Wait until application is downloaded
and open it to perform installation pro-
cess.
8. Run application and allow application
to freely communicate with smart-
watch.
9. Use smartphone and go to menu/ac-
cessibility settings/SmartWatch MT853
– enable.
10. Power o and power on smartwatch –
now you can use smartwatch.
Using the device
In standby mode press menu icon to en-
ter options. Press dial icon to enter
dial numeric keyboard. To resume home
screen press home button. To scroll more
menu icons swipe nger across screen. To
scroll option up/down use your nger to
swipe screen up/down.
Note! If you have installed microSIM card
when you dial number a menu will pop-up
to select which SIM card use to make phone
call – local SIM or smartphone SIM.
Menu content
■Messaging
Write message
Inbox
Drafts
Outbox
Sent messages
SMS settings
■Call logs
Missed calls
Dialed calls
Received calls
All calls
■Bluetooth
Power
Visibility
My name

6
EN
■BT Dialer
Search new device
■Remote Notication
Read notications from smart-
phone.
■Remote capture
Before open remote capture
please unlock smartphone,
press capture to release shut-
ter, les are saved in smart-
phone memory.
■Anti Lost
When distance between
smartwatch and smartphone
is almost out of range you can
be notify about this by sound
alarm or vibration.
Looking phone – enable
function to play alarm on your
smartphone.
AntiLost – select how function
should notify you.
■BT music
Remote audio player.
■Settings
Phone settings
- Set home city
- Set format
- Set time/date
- Schedule power on/o
- Language
- Backlight time setting
- Flight mode
- LCD backlight
Security settings
- Phone security
• Phone lock
• Change password
- Network settings*
- Network selection
- GPRS connection
- GPRS transfer pref.
Connectivity
- Data accounts*
Restore settings
■Pedo
Application can count your
steps and time.

7
EN
■Sleep monitor
Application can monitor qual-
ity of your sleep.
■Reminder
You can set
cycle reminder.
■QuickResp
Display QRcode to download
Bluetooth notify software
■Alarm
You can set alarm.
■Calendar
Display calendar.
■Proles
Select active sound prole
or modify as needed.
■Audio player
You can play
from local microSD
card or from
smartphone.
■Sound recorder
You can use smartwatch as
dictaphone.
■Camera
Application for smartwatch
built-in camera. You can take
photos.
■Image viewer
You can view local
image les.
■File manager
Open le explorer.
■Calculator
Open calculator application.

8
EN
*function requires microSIM card in the smartwatch.
Due to continuous development specication and appearance of product are subject to
change without prior notice. For technical support please visit www.media-tech.eu.