
MedViron | 9680 Pentatech Drive, Zeeland, Michigan 49464 USA | 1-844-medviron | medviron.com
Thank you for purchasing a MedViron Overbed Table.
The MedViron Overbed Table is a mobile table with an adjustable height surface designed to be used with
various types of adjustable beds and chairs. This table is able to meet both patient and caregiver needs by
providing a surface for eating and working, along with personal storage space.
Please become familiar with all details in this manual before using the overbed table or beginning
maintenance. Procedures should be established for training staff on the proper use and operation of your
MedViron Overbed Table.
Safety Alerts:
This user guide must be read completely before the overbed table is put into use.
Staff is strongly encouraged to instruct patients on how to use the overbed table.
The overbed table should only be used on flat surfaces.
The casters are designed for use in an indoor environment and for travelling on flat, smooth, clean
floors.
The casters could be damaged when moving the overbed table over rough, uneven, and dirty
surfaces.
Do not use the overbed table if its construction or casters have been damaged because this could
cause loss of stability.
Do not sit or lean on the overbed table. Doing so may cause the table to tip which may result in
personal injury, or in damage to the table.
Do not use the overbed table as a support when getting up or as an assist in walking.
Do not overload top surface or storage areas in excess of the prescribed limits.
Exercise caution when operating the activation handle to avoid pinching fingers between the
activation handle and top surface.
If defects are found on any part of the overbed table, immediately remove the overbed table from
service.
Only original materials and components may be used to repair the overbed table. MedViron will not
be liable for any damages that arise from using non-original or inappropriate materials and
components.
Follow cleaning and preventative maintenance instructions.
Warning: Do not lift the overbed table by the top when it is in the full extension position.