Mee-go S-Rider Sit & Ride User manual

S-Rider Sit & Ride
Instruction Manual

Important Safety Information
IMPORTANT - KEEP THESE INSTRUCTIONS FOR FUTURE USE.
This Sit & Ride is intended for children who can walk independently up to a
maximum weight of 25kg.
WARNING: NEVER LEAVE YOUR CHILD UNATTENDED.
WARNING: BEFORE USING THE PRODUCT, MAKE SURE THAT ALL THE LOCKING
DEVICES ARE ENGAGED.
WARNING: IN ORDER TO AVOID ANY INJURIES, MAKE SURE THAT YOUR CHILD IS
REMOVED AND AWAY FROM THE SIT & RIDE WHILE ADJUSTMENTS ARE BEING
MADE.
WARNING: DO NOT ALLOW THE CHILD TO PLAY WITH THE PRODUCT.
WARNING: ALWAYS USE THE SAFETY HARNESS.
WARNING: THIS PRODUCT IS NOT SUITABLE FOR RUNNING OR ROLLER SKATING.
WARNING: NEVER LIFT/CARRY THE CHASSIS WHILE OCCUPIED.
WARNING: DO NOT USE THE SIT & RIDE ON STEPS, STAIRS OR ESCALATORS.
WARNING: ALWAYS USE ATTACHED TO THE REAR OF THE PUSHCHAIR.
WARNING: DO NOT USE IF THE BRAKE FUNCTION ON THE PUSHCHAIR IS
HINDERED.
CAUTION:
• Contact your local Mee-go stockist immediately should any components
become damaged.
• Before proceeding with the mounting operations, make sure that the product
and all its components are in working order, if they are damaged, the product
should not be used.
• This product is intended for use for children who can walk independently up to a
maximum weight of 25kg.
• While assembling the Sit & Ride make sure that your child stays at a safe
distance.
• There may be some brands of pushchairs that the Sit & Ride is not suitable for,
consult your Mee-go stockist if in doubt.
• Before each use ensure the Sit & Ride is correctly attached to the chassis.
• Do not use in snow or on soft surfaces.
• Always ensure that pushchair handles are held securely when your child is using
the Sit & Ride.
• This product is not a toy.
• Ensureyourchild’sngersandotherbodypartsareclearwhenmakingany
adjustments to the Sit & Ride.
• Always apply the brake on the pushchair when stationary.
• Check regularly that all the components of the Sit & Ride are in good working
order and safe.
• Never use force to adjust the movable elements of the Sit & Ride.
• Never attach or hang anything from the Sit & Ride.
• Never leave the pushchair and Sit & Ride with the child on a inclined surface
even if the parking device is engaged.
• NeverleavetheSit&Ridewiththechildnearswimmingpools,stairsandre.
• Keep the plastic parts of the packaging away from the child to prevent the child
from choking.
!
!
!
!
!
!
!
!
!
!

CLEANING AND MAINTENANCE.
• The fabrics can be cleaned with a wet sponge or cloth, using a mild detergent
and warm water.
• Regularly check bolts and fastenings etc. to ensure they are secure. Replace any
parts which look damaged or in an inferior condition.
• When using this Sit & Ride during the winter or by the sea it is important to
clean using clean fresh water and always dry thoroughly. Salt water
and salt and grit from the roads will corrode metal parts unless removed.
• A silicone spray can be used to lubricate moving parts.
• Do not expose the product to excessive sunlight for extended periods of time.
Should you nd a defect with this product:
Please keep your original receipt of purchase safe as it will be required should you
unfortunatelyndadefect.Thereceiptmustshowthedateofpurchaseclearly.
Shouldyoundadefectwiththisproductyoumustrstcontacttheoriginalplace
of purchase. Repairs to any part of this product do not extend the warranty period.
Do not return your product direct to the manufacturer.
Warranty information:
For full warranty details please visit http://www.mee-go.co.uk/warranty/
To register your warranty:
Please visit http://www.mee-go.co.uk/register/
1. PARTS LIST.
1. Connector straps.
2. Extension arms.
3. Levelling adjuster.
4. Non-slip base.
5. Wheels(withLEDashinglights).
6. Steering wheel.
7. Seat.
8. Safety harness.
Imageaboveshownwithseatpad(optionalextra).
1.
2.
3.
4.
6.
7.
8.
5.

2. ASSEMBLY INSTRUCTIONS.
1. Remove all packaging. Remove the screw and bolt from the seat post. Insert the
seatintotheseatpostandfastenwiththescrewandbolt(g.1).
2.Inserttheseatpostontothebase(g.2).
3.Insertthescrewheadtotheundersideofthebaseandsecuretightly(g.3).
CAUTION! ENSURE THE SCREW HEAD IS SECURED TIGHT BEFORE USE.
4.Insertthesteeringwheeltothefrontoftheseatandsecurewiththebolt(g.4).
5. Attach the connector blocks onto the extension arms by pressing the button on
theconnectorstoreleasethehook(g.5)thenattachthehooktotheextension
arms.Ensurethehooksarelockedintoplacecorrectlybeforeuse(g.6).
6.Pressthebuttonontheconnectorblockstoreleasetheconnectorstraps(g.6).
7.Pressthebuttonontheundersideoftheconnectorstoreleasethestrap.(g.7).
Attach the connector straps to the rear of the pushchair chassis.
8. Feed the straps back in to the connector blocks, tighten and ensure they are
securelyengaged(g.8).
CAUTION! ENSURE THE CONNECTOR STRAPS ARE SECURE BEFORE USE.
9. Adjust the distance between the Sit & Ride and the chassis using the extension
arms(g9).
10. Adjust the Sit & Ride base using the adjusters located at the front side of the
basesotheSit&Rideislevelandallfourwheelsaretouchingtheground(g.10).
11. The Sit & Ride is equipped with an adjustable strap to raise the Sit & Ride from
theoorwhennotinuse.Hookthestraptothebaseandattachedsecurelytothe
chassishandle(g.11).Important: The strap may not be suitable for all makes of
pushchairs.
12. The S-Rider comes with a stopper for when the seat is removed to use as a stand
onboard(g12).
Fig. 1.
Fig. 4.
Fig. 7.
Fig 10.
Fig. 2.
Fig. 5.
Fig. 8.
Fig. 11. Fig. 12.
Fig. 3.
Fig. 6.
Fig. 9.

Mee-go Ltd
Unit 5, Wharf Street,
Dewsbury WF12 9AU
T: 01924 485552
E: [email protected]o.uk
W: www.mee-go.co.uk
Copyright Mee-go Limited
September 2016.