Mees T1 User manual

Usermanual
T1 Earbuds
charging case
T1
ユーザーマニュアル/保証書
※ユーザーマニュアル/保証書、多国語バージョンがあるの
で、万一その内容が相違した場合、日本語バージョンが標
準となります。
2018年6月改訂版
EN

Pair with Bluetooth
Earbuds remove from the case, aer automacally turn on, the
right will automacally connect to the le, Aer the right connect
to the le, Le with “pairing” prompt tone, the LED indicator
flashes green and blue;
Note: You have 3 mins to paired with your device, or they out
pairing mode. Put them in the case to wake them back up.
Turn on the Bluetooth on your device, go to Bluetooth menu,
select for: T1, pair and connect. You will hear “Connected”
when pairing is complete.
T1
Best fit & best sound
Tryall the ear ps to find the best fit and the best sound.The fit is
right when you get a complete seal, the ear ps feel comfortable,
and you get the best quality and loudest sound.
Note:
Le earbud will connect to your device.
The right one will connect to the le.
T1Overview
Power on/off
Power on when pick out from the charging case.Power off and
charge when place back in the case.
Light
Microphones
Charging Pocket
Music & Call Buon
1
2
3
4
1
2
3
4

Insert the earbuds with the earp directed towards your ear
canal. Twist gently unl fit comfortably and feel secure in your
ear.It will be affect the signal of the earphone and microphone
if wrong wearing.
Tip: More than one earps size mayfit you. Choose the one that
completelyseals your ear canal for the best sound.You may need
different size ear ps for leand right.
Calls
When making and answering calls, you can press master earbud.
※ Press once to answer an incoming call, or press and hold MFB
for 2 seconds to reject it.
※Press once to end a call.
※ When you are talking on the phone and receive another
incoming call,
1. Press MFB once me, end first call and answer new coming call;
2. Long press MFB 2 seconds, answer new call and first call will be
placed on hold;
3. if new coming call answer and first call on hold, long press MFB
2 seconds, switching between two calls.
Note: All calls will be heard in the le earbud only.
Music
Start playing music on your music player and you could control it
with both master and partner earbud.
Charge the earbuds
Put the earbuds into the case.
The earbud green light turns on when it is charging and light turns
off when it is completely charged.
45
※ Press once to pause a track. Press again to resume.
※ Double-press to go to the next track.
※ Triple-press to go back one track
Wrong wearing

Earbud status lights
Charging Breathing blue light
Full charge Steady blue light (Light turn off aer pull out charging cable )
Baery low Blinking blue
Basic Specificaons of Earphone
Size: 23.6×16.5×26.7mm
Weight: 4.5g
Earbuds Charging Current:55mA
Earbuds Charging me: 1 hour
Working Voltage: 3.3V~4.2V
Standby me: about 40 hours
Music Time:2~2.5 hours
Talking Time:2 hours
Bluetooth version: Bluetooth 4.2
Support Profile: HSP, HFP, A2DP, AVRCP
RF transmit: Class-2
Transmission Range (Hz): 2.40GHz ~ 2.48GHz
Transmission distance: 10m
Audio sampling accuracy: 16bits
Audio sampling rate: 44.1~48kHz
Audio encoding format: CVSD,MSBC,SBC,AAC
SNR: >95dB
Working temperature: -15℃~+60℃
Working humidity: 10%~85%( in a non-frozen state)
Earbud Speaker Specificaons
Speaker specificaons / mode: Φ6mm
Impedance: 16Ω/ TYP.
Frequency(Hz): 20Hz~20KHz
Sensivity: 93±3dB
Input Power: 2.0mW (Normal), 5mW (Maximum)
Earbud MIC Specificaons
1.MIC type: Silicon MIC
2.MIC sensivity: -42±3dB
3. SPL：130dB
Basic Specificaons of Charging Case
Size: 59.5*34.5*27.3mmWeight:27.6g
Charging Port: Micro
Charging base(Full) provide power to earphone: 1.5 mes
Charging me : 1-2hrs
Input Voltage :DC5V
Charging current:300mA
Output Voltage:DC5V
Charge the case
Charging the case by plugging in the charging cable. The case
breathing blue light when it is charging
Charge level
Your earbuds let you know when your baery level is low. Every 20
seconds you will hear“Baery low” when there is 5 minutes of
baery level.
Pairing Le & Right earphone Guide:
1. Put both earphone back to the charging case. then Pick out the
both earphone from the charging capsule;
2. Make sure both of earphone didn't connected with any devices;
3. Double click the main buon of le earphone you'll hear
"Pairing" from the le earphone. Then Hold the main buon of
le earphone for 3 seconds, You'll hear "TWS searching". While
the indicator light was flashing blue and green;
4. Double click the MFB buon of right earphone, you'll hear
" pairing"
5. Wait unl you hear "TWS Connected" from right earphone,
Pairing done.
Charging Steady green light(Case with breathing blue light)
Full charge Light turn off (Case turn off breathing light)
Pairing Blinking blue and green
Note: Your baery is designed to last life of the product. It
should only be removed by a recycling facility. And aempt to
remove or replace your baery will damage the product and void
your warranty.
Case status lights
When your case is plugged into a charge cable for charging , you
will see charging lights.

Safety Warning
Please disconnect the USB cable aer charging. Product should
not de charging in a long me. Please use the charger or adaptor
with output voltage and current(max) 5V/1A or 5V/1.5A and
product original charging cadle for the product charging. lf the
output voltage and current of the charger exceeds the
requirement,it will cause severe damage to the product, and the
product warranty will be invalid.
Safety instrucons for use
To avoid hearing damage, keep the volume at a moderate level.
Avoid listening to music at loud volume levels for prolonged
periods of me as this may cause permanent hearing damage or
hearing loss.Do not use T1 when it is unsafe to do so. For
example, while operang a vehicle, cycling, crossing a road, or
any acvity which requires your aenon and ability to hear.
Note: If you are watching video while using your earbuds, your
audio may be slightly out of sync with your device.