Mees M1 User manual

Usermanual
M1 Earbuds
charging case

M1（R)
M1（L)
�Select one earbud as
main earbud
Remark: Make sure the other earbud
is in the charging case
� Quick press 2 mes MFB
Red/Blue LED blinking and you will
hear "Pairing"
�Search the bluetooth
list from device, and
choose "M1(R) or (L)"
You will hear "connected" Pairing is
done and succeed.If require, Please
input "0000" as bluetooth password
�Pick up the other earbud
from charging case
You will hear "Power on"
and "TWS connected"
Note: All calls will be heard in the Main earbud only.
M1 remember devices it's not necessary to Repair, Enable
bluetooth on your device, it'll reconnect automacally.
Insert the earbuds with the earp directed towards your ear canal. Twist
gently unl fit comfortably and feel secure in your ear.
Best fit & best sound
Tryall the ear ps to find the bestfit and the bestsound.The fit is right
when you geta complete seal, the ear ps feel comfortable, and you get
the best quality and loudestsound.
Tip: More than one earps size mayfit you. Choose the one that
completely seals your ear canal for the bestsound.You may need different
size ear ps for leand right.

M1 basics
Power On/Power off
Pick up earbuds from the charging case , earbuds will be power on
automacally, you will hear "Power on"Put the earbuds into the charging
case, earbuds will be power off and start to charge, you will hear
"Power Off"
Accept Call/Reject Call Short press MFB
Redial Last Call Press MFB twice
Play/Pause Music Short presss MFB
Volume"+"
Short press
Previous song
Long press
Volume"-"
Short press
Next song
Long press
Earbud status lights
Status Color
Charging Red
Fully charged Off
Case status lights
When your case is plugged into a charge cable for charging , you will see
charging lights.
Charging Slow blinking blue
Full charge Steady blue light
Note: Your baery is designed to last life of the product. It should only
be removed by a recycling facility. And aempt to remove or replace
your baery will damage the product and void your warranty.
Charge the case
Charging the case by plugging in the charging cable. The case light turns
on when it is charging.
Charge level
Your earbuds let you know when your baery level is low. Every 20
seconds you will hear“Baery low” when there is 2 minutes of
baery level.
Charge the earbuds
Put the earbuds into the case.
Push back the case unl it is completely closed.
The earbud green light turns on when it is charging and light turns off
when it is completely charged.
MFB
MFB

Safety Warning
Please disconnect the USB cable aer charging. Product should not de
charging in a long me.
Please use the charger or adaptor with output voltage and current(max)
5V/1A or 5V/1.5A and product original charging cadle for the product
charging. lf the output voltage and current of the charger exceeds the
requirement,it will cause severe damage to the product, and the product
warranty will be invalid.
Safety instrucons for use
To avoid hearing damage, keep the volume at a moderate level. Avoid
listening to music at loud volume levels for prolonged periods of me as
this may cause permanent hearing damage or hearing loss.
Do not use M1 when it is unsafe to do so. For example, while operang
a vehicle, cycling, crossing a road, or any acvity which requires your
aenon and ability to hear.
Note: If you are watching video while using your earbuds, your audio
may be slightly out of sync with your device.
Basic Specificaons of Earphone
Size: 23.6×16.5×26.7mm
Weight: 4.5g
Earbuds Charging Current:55mA
Earbuds Charging me: 1 hour
Working Voltage: 3.3V~4.2V
Standby me: about 40 hours Music Time:2~2.5 hours
Talking Time:2 hours
Bluetooth version: Bluetooth 4.2
Support Profile: HSP, HFP, A2DP, AVRCP
RF transmit: Class-2
Transmission Range (Hz): 2.40GHz ~ 2.48GHz
Transmission distance: 10m
Audio sampling accuracy: 16bits
Audio sampling rate: 44.1~48kHz
Audio encoding format: CVSD、MSBC、SBC、AAC
SNR: >95dB
Working temperature: -15℃～+60℃
Working humidity: 10%~85%( in a non-frozen state)
Earbud Speaker Specificaons
Speaker specificaons / mode: Φ6mm
Impedance: 16Ω/ TYP.
Frequency(Hz): 20Hz～20KHz
Sensivity: 93±3dB
Input Power: 2.0mW (Normal), 5mW (Maximum)
Earbud MIC Specificaons
1.MIC type: Silicon MIC
2.MIC sensivity: -42±3dB
3. SPL：130dB
Basic Specificaons of Charging Case
Size: 59*34*24mm Weight:27g
Charging Port: Micro
Charging base(Full) provide power to earphone: 2 mes
Charging me : 2hrs