Mees Ms01b User manual

MS01B(BES) Quick Start Guide

Note: Pull the case to open it. The earbuds with R / L symbol. Left will be the master earbud and

connect to your device, the right will automatically connect to the left.

Earbuds automatically turn on when removed from the case.

They turn off and charge when placed back in the case.

Step 1: Wear

Best fit & best sound

Try all the ear tips to find the best fit and the best sound. The fit is right when you get a complete

seal, the ear tips feel comfortable, and you get the best quality and loudest sound.

Tip: More than one ear tips size may fit you. Choose the one that completely seals your ear canal

for the best sound.

Note: You may need different size ear tips for left and right.

Wear

Insert the earphones with the ear tip directed towards your ear canal. Twist gently until fit

comfortably and feel secure in your ear.

Note: When you take the earphones out of the case, double-press MFB to enter pairing mode,

you have 3 mins to paired with your device, or they out pairing mode. Put them in the case to

wake them back up.

Step1: Wear

Step 2: Pair with Bluetooth

1.Turn on the Bluetooth on your device.

2.Earbuds remove from the case, after automatically turn on, the right will automatically

connect to the left, the left earbud with “Connected ”“Left” prompt tone; the right earbud

With “Connected”“Right”prompt tone;

After the right connect to the left, Left with “pairing”prompt tone, the LED indicator flashes

green and blue;

3.On your device, go to Bluetooth menu, select for: MS01B(BES), pair and connect.

You will hear “Connected” when pairing is complete.

Note:

Only the left earbud will connect to your device. The right one will connect to the left.

The left earbud may also be used as a single headset.

Tip:

When you hear “Right”from right earbud, “Left”from left earbud, both earbuds are

connected for stereo use. When you hear “Connected”your earbuds are connected to your

device.

Music

Start playing music on your music player and then control it with master earbud.

※Press once to pause a track. Press again to resume.

※Double-press to go to the next track.

※Triple-press to go back one track

Calls

When making and answering calls, you can press master earbud.

※Press once to answer an incoming call, or press and hold MFB for 2 seconds to reject it.

※Press once to end a call.

※When you are talking on the phone and receive another incoming call,

1) Press MFB once time, end first call and answer new coming call;

2) Long press MFB 2 seconds, answer new call and first call will be placed on hold;

3) if new coming call answer and first call on hold, long press MFB 2 seconds, switching

between two calls.

Note: All calls will be heard in the left earbud only.

Charge

Charge the earbuds

Put the earbuds into the case.

Push back the case until it is completely closed.

The earbud green light turns on when it is charging and light turns off when it is completely

charged.

Charge the case

Charging the case by plugging in the charging cable. The case light turns on when it is charging.

Charge level

Your earbuds let you know when your battery level is low. Every 20 seconds you will hear

“Battery low”when there is 15 minutes of battery level.

Earbud status lights

Charging

Steady green light

Full charge

Light turn off

Pairing

Blinking blue and green

Note: The earbud lights turn off after full charge to conserve battery. The earbuds will continue to

charge until full.

Case statue lights

When your case is plugged into a charge cable for charging , you will see charging lights.

Charging

Steady blue light

Full charge

Light turn off

Battery low

Slow blinking blue

Note: Your battery is designed to last life of the product. It should only be removed by a recycling

facility. And attempt to remove or replace your battery will damage the product and void your

warranty.

Get the best connection

To optimize Bluetooth connection and minimize drop, keep your device in the optimal RF zone.

Earbuds LED Indicator Status

Notes (For earbuds):

It will turn off automatically after 5 minutes if without any connection with mobile phone when it

turns on.

Pairing time: 3 minutes. It will quit the pairing mode automatically after 3 minutes if without any

connection with mobile phone when it is in the state of pairing.

In addition, it can show the battery state on Apple devices.

Charging case LED Indicator Status

1. Pull charging case: Blue light breathing

2. Close charging case: Light off

3. Charging (charging case is closed): Lighting blue

4. Charging completed (charging case is closed): Light off

5. Low battery (pull charging case): Blue light flashing

6. Earbuds R & L put into the charging case (Blue light breathing): after closed the charging

case, charging case light off; earbuds in charging, bright green LED light; earbuds

charging completed, earbuds light off.

7. When charging case of electricity shortage, Using Micro USB cable to connect computers or

USB port adapter power to charging, light blue led light when charging; charging completed,

case light off.

Basic Specifications of Earphone

1.Size: 23.6×16.5×26.7mm

2.Weight: 4.5g

3.Charging port: Magnetic type

4.Button: 1 (MFB button)

5.Charge indicator: Green LED light (Charging) / Light off (Charging completed)

6.Battery: Lithium-ion Polymer Rechargeable Battery, 55mAh

7.Earbuds Charging Current:55mA

8. Earbuds Charging time: 1 hour

9.Working Voltage: 3.3V~4.2V

10.Standby time: about 40 hours

Charging

Green LED Light

Charging Complete

LED Light Off

Power ON

Blue LED light flashes for one second

Power Off

Green LED light flashes for one second

Pairing Mode

LED light flashes in green and blue alternately

Power On (Not Connected)

Blue LED light flashes once every 2 seconds

Power On (Connected)