Members Mark 980250193 Owner's manual

1 | P a g e
Assembly Instructions & User’s Manual
for
Member’s Mark Colton 4pc Seating
Item Number: 8406501-0440004
Model Number: 980250193
Customer Assistance (spare/replacement parts): 1-866-563-1732
or Email: [email protected]
THIS ASSEMBLY MANUAL CONTAINS INPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

2 | P a g e
Table of Contents
Quality Statement.....................................................................................................................................3
Important Safety Information................................................................................................................3
Before Assembly......................................................................................................................................3
Care & Use.................................................................................................................................................3
Product Information ................................................................................................................................4
Components..............................................................................................................................................4
Hardware....................................................................................................................................................5
Tools............................................................................................................................................................5
Step 1 –Table Assembly........................................................................................................................6
Step 2 –Table Assembly........................................................................................................................7
Step 3 –Table Assembly........................................................................................................................8
Step 4 –Sofa Assembly .........................................................................................................................9
Step 5 –Sofa Assembly .......................................................................................................................10
Troubleshooting.....................................................................................................................................11
Care & Use Instructions.......................................................................................................................11
Warranty Information............................................................................................................................11

3 | P a g e
Quality Statement
Important Safety Information
•Please read all instructions carefully before assembling this product.
•Where applicable, and for your safety, assembly by an adult is strongly
recommended.
•Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
•Hardware may loosen overtime. Periodically check that all connections are tight.
•[NOTE: Please add any additional required Safety information. These will be item
dependent and based upon factory and industry standard requirements &
recommendations.]
Before Assembly
•Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
•The shipping box can provide an ideal work surface if none is available.
•Use the components and hardware lists below to identify, inventory and separate
each of the hardware and components included.
•To avoid accidentally discarding small components or hardware, do not dispose
of any packaging or contents of the shipping carton until assembly is complete.
•DO NOT USE power tools unless it is explicitly identified in this manual as
required for use during assembly. Power tools can damage the fasteners,
hardware and/or components.
•Do not fully tighten all fasteners / screws until all parts are in place. Failure to
follow these instructions may cause the fasteners / screws to misalign during
assembly.
Care & Use
•Use a soft, clean cloth that will not scratch the surface when cleaning.
•Clean once a year with mild soap and water, then rinse
•Use outdoor furniture covers or store when not in use
•DO NOT USE solvents, janitorial cleaners, alcohol-based cleaners, protectants,
scouring agents, bleach, gasoline, or ammonia-based cleaners

4 | P a g e
Product Information
Chair –38.2”W x 34.2” D x 28.7”H (97.03cm x 86.87cm x 72.9cm)
Sofa –102.4” W x 34.2”D x 28.7” H (260.1cm x 86.89cm x 72.9cm)
Table –56”W x 30” D x 16.95”H (142.24cm x 76.2cm x 43.05cm)
Components
Component A
Chair
Qty: 2
Component B
Sofa
Qty: 1
Component C
Tabletop
Qty: 1
Component D
Table Shelf
Qty: 1
Component E
Table Leg 1
Qty: 2
Component F
Table Leg 2
Qty: 2
Component G
Sofa Center Leg
Qty: 1
Component H
Sofa Corner Foot
Qty: 4

5 | P a g e
Hardware
Hex M6*20mm Bolt (H1)
Qty: 4
Hex M6*35mm Bolt (H2)
Qty: 8
Hex ¼”-20*25mm Bolt (H3)
Qty: 8
Flat Washer 1 (H4)
Qty: 16
Flat Washer 2 (H5)
Qty: 4
Bolt Cap (H6)
Qty: 20
Hex M6*45mm Bolt (H7)
Qty: 12
Plastic Washer (H8)
Qty: 8
Tools
Hex Wrench (Included)

6 | P a g e
Step 1 –Table Assembly
Place Tabletop (C) on a smooth, flat surface and attach Table Leg 1 (E) and 2 (F) using
the ¼”-20*25mm Bolt (H3) and Flat Washer 1 (H4). The holes should all face inwards.
Tighten with included Hex Wrench. Do not completely tighten until all components are
assembled.

7 | P a g e
Step 2 –Table Assembly
Attach the Table Shelf (D) to each of the legs using the M6*35mm Bolt (H2) and Flat
Washer 2 (H5). Tighten with included Hex Wrench. Do not completely tighten until all
components are assembled.
After fully assembled and tightened, cover exposed bolts with Bolt Caps (H6)

8 | P a g e
Step 3 –Table Assembly
Turn assembled Table over onto its legs and if needed, adjust the levelers to level the
table.

9 | P a g e
Step 4 –Sofa Assembly
Lay Sofa on a smooth, flat surface and attach the Sofa Corner Foot (H) putting the
M6*20mm Bolt (H7) through Plastic Washer (H8). Tighten with included Hex Wrench.
Repeat on all four corners. Do not completely tighten until all components are
assembled.

10 | P a g e
Step 5 –Sofa Assembly
Attach the Sofa Center Leg (G) using the M6*20mm Bolt (H1) and Flat Washer 2 (H5).
Tighten with included Hex Wrench (H9). Do not completely tighten until all components
are assembled.
After fully assembled and tightened, cover exposed bolts with Bolt Caps (H6).