Merco Multi 3 Games User manual

Multi 3 Games
mobile posts
Instructions
ID : 63499
EAN : 8591792634990

Package contents
metal base blue , 2 pieces
t w o - part adjustable posts , 2 pieces
reinforcing bars , 4 pieces
co v er nuts for fi x ing posts , 8 pieces
short bolts for attaching reinforcing bars , 4 pieces
scre w w ith w ing nut for fi x ing reinforcing bars , 2 pieces
long scre w s for fi x ing w heels , 4 pieces
locking scre w , 2 pieces
w inding mechanism handle , 1 piece
1 . Unscre w all scre w s and co v er nuts on the blue base .
2 . Open the blue base and remo v e the fittings and accessories .
3 . Using long scre w s , scre w the w heels to the a x is into the threaded hole in the sides of the
bases .
4 . Insert the minimum recommended load inside the blue bo x es , at least 60 kgs into each
bo x . The load is not part of the package .
We recommend inserting , for e x ample , bags w ith sand or other loose material .
It is not possible to use the posts w ithout an inserted load , as the y w ould not be stable
enough . Before starting thegame , make sure that the posts are sufficientl y secured and
cannot tip o v er !
After closing the base , place the lo w er part of the posts on the threaded studs and fasten
them w ith the co v er nuts . Scre w a metal roller w ith a locking pin and a scre w into the post
hole .
Install the 2 reinforcing bars bet w een the post and the base bo x . First , measure the distance
bet w een the base and the post and unscre w the terminals accordingl y . Attach the
reinforcing bars to the post w ith a scre w and a w ing nut . Attach them to the stand w ith t w o
short scre w s . Bend the strut ends slightl y to adjust b y bending the slope at the joint .
Assembl y instructions
Warning

Instructions for use
• Tilt the assembled posts , including the inserted load , and use w heels to transport them to
the field .
• Loosen the locking scre w in the metal roller on the side of the column to the ma x imum .
E x tend the top column to select the desired height . The holes in the upper post must be
directed directl y against the locking pin . After setting the required height , make sure that
the locking pin fits into the hole in the post . Then make sure to tighten the locking scre w to
the ma x imum and make sure that the upper post is firml y held in the lo w er post .
• Tighten the net w ith the upper pulle y and the loop w inding mechanism and secure it b y
attaching it to the hooks .
• The posts allo w y ou to stretch the net in up to 7 heights :
155 cm - badminton
180 , 190 , 200 , 210 , 224 , 243 cm - v olle y ball
Use the hooks on the inside of the bottom post to place the net at lo w er heights . Slide the
upper post into the lo w er one to the ma x imum and attach the net to the hooks w ithout
using a tensioning mechanism . Suitable for soft tennis , for e x ample .
Importer to C z ech Republic :
RADANSPORT s . r . o .
Za Ot ý lií 10 370 01 České Budějo v ice
email : obchod @ e - sportshop . c z
phone : + 420 387 411 543