Merlin AQUATRAX MINI User manual

1
Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the
features this unit has to offer.
Please save this manual for future reference.
Product introduction
Product Structure:
1. Power switch
2. Previous/Vol-
3. Multi-function button (MFB)
4. Next/Vol+
5. Reset
6. Micro USB charging interface
7. Micro SD card slot
8. Charging indicator
9. LED status indicator
Power On/Off
1. To turn on, long press the power switch for 3 seconds, the LED status
indicator flashes white.
2. To turn off, long press the power switch for 3 seconds, the LED goes
off.
Bluetooth connection
1. Turn on the Bluetooth speaker, the LED indicator flashes white
continuously while waiting for pairing; you can long press MFB to
disconnect and enter pairing mode.
2. Then activate the Bluetooth of your phone and search for ‘Merlin
Aquatrax Mini’.
3. Since the speaker can automatically reconnect to the last paired
device, when the Bluetooth of your device turns on, it will
automatically reconnect.
Answering incoming calls:
1. Short press the MFB to answer incoming calls.
Tip: Since some mobile phones default to answer calls via their own
receiver, please refer to the instructions of your phone and set
accordingly.
Ending the call:
1. Press the MFB button once to end the current call.
Refuse incoming calls:
1. Press the power switch for 3 seconds to reject when there is an
incoming call.
Volume adjustment:
1. Short press the ‘”-” for VOL -;
2. Short press the ‘+’ for VOL +.
Music playing:
1. Short press the to pause/play;
2. Long press the “-” for Prev;
3. Long press the ‘+’ for Next.
Charging:
1. As product has built-in non-removable and rechargeable battery,
please use the provided micro USB cable to charge.
2. Charging voltage and current is 5V/1A. Please ensure to charge the
speaker with the input power below 5V/1A.
3. Charge if the LED indicator lights up red, and LED goes off upon
charging finished.
Notes:
A. Please choose the charger that is certified by the regular
manufacturer.
B. As normal with all rechargeable batteries, the battery performance
may decrease due to repeated charging and speaker usage.
Warnings:
1. Please follow the instructions to operate
2. Please charge the product with input power below 5V/1A, in order to
protect the battery;
3. Please do not immerse this product in any liquid or splash any liquid
on this product.
4. Please store or use the product in a normal temperature
environment.
5. Please keep the product away from heat sources such as radiators,
hot air regulators, stoves or other heat generating instruments. As it is
not anti high temperature.
6. Don’t jam the ports of the product, such as charger port, LED port
and microphone etc.
7. In order to protect your hearing and extend the speaker service life,
it is not recommended to adjust the volume to the maximum level for a
long time.
FAQ:
Q) How long does the Aquatrax Mini play for?
A) 5 Hours
Q) Why is the speaker is not pairing to my phone?
A) Please check that the speaker is charged

2