Merlin AQUATRAX 2 User manual

1
Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the
features this unit has to offer.
Please save this manual for future reference.
Instructions
The Aquatrax 2 is a compact Bluetooth speaker that connects to your
smart devices. It has a powerful stereo sound and a built-in battery for
portability.
Charging:
Before using the Aquatrax 2 please charge it with the micro USB cable
to the charging port at the back of the unit. While charging LED will
light up red. The red led will switch off when the unit is fully charged.
When the battery is low the led will flash red to indicate a charge is
needed.
Bluetooth Pairing:
-Active your phone’s Bluetooth.
-On your phone’s Bluetooth settings, scan for new Bluetooth devices.
-Search and pair with “Aquatrax2”.
- If you phone asks for pairing code, please enter 0000 and confirm.
- After successful pairing, the speaker will make a sound and the LED
light will turn blue.
Power ON/OFF:
Long press this button to switch the unit on and off.
Volume –or +:
Turn the dial clockwise to turn up the volume and counterclockwise to
turn the volume down.
Next/Previous:
In Bluetooth mode, slide to the right to get to the next track and to the
left to get to the previous track
Play/Pause:
When playing music, short press the power button to Pause/Play.
Answering a call:
When a call comes in, short press to pick up the call and press it
again to hang up.
Refusing a call:
When a call comes in, press twice quickly to refuse the call.
EQ mode:
Press the MODE icon to select the mode to OUTDOOR or INDOOR
and the icon will illuminate accordingly.
FAQ
Q) How long does it take to charge?
A) Approximately 3 –4 hours .
Q) My speaker does not play music/answer a call when connected
via Bluetooth to a mobile phone?
A)
-Make sure your Bluetooth mobile phone supports A2DPand
HSF(hands-free) profile
-Ensure your Bluetooth cell phone is within effective working range
Q) Cant connect to the Aquatrax 2 via Bluetooth.
A) Ensure the unit is fully charged and no other device is connected
already. Disconnect all other devices before pairing a new one to
the Aquatrax 2.
Maintenance
1. Retain these instructions for future use.
2. Clean the product with a damp cloth and mild soap.
3. Do not expose this product to rain or moisture.
4. Be careful not to turn or twist the cables used in this product
too much as it can lead to malfunction and failure.
5. This product is not designed to be submerged in water and
will malfunction if this occurs.
6. This product has no user serviceable items inside. Do not
open this product as the user risk injury and would void the
warranty.
7. Keep unit away from strong magnetic fields to avoid
interference with the product.

2