Metodo X8 User manual

INSTRUCTION MANUAL
EN

GENERAL OPERATING
RULES
Carefully read the instruction manual
and warranty limitations
The machine must be connected to a
grounded power outlet. The machine must
be kept clean by frequently washing the
grid, the driptray, the capsule holder, the
tank, the steam knob, and the air intake
EXTREMELY IMPORTANT: never immerse
the machine in water or put it in the
dishwasher. The water contained in the
tank must be replaced regularly. Do not use
the machine if the tank is empty
After changing the water, check that
the water intake tube is inside the tank.
We recommend descaling at least every
two months using a descaling agent
made especially for espresso machines
according to instructions in the
chapter
The boiler is fitted with a valve that
maintains constant pressure,
for this reason some water may drip from
the capsule holder
DECALCIFICATION

MACHINE PARTS ...............................................................................28
IMPORTANTSAFEGUARDS......................................................................30
30
30
31
31
.......................................................31
.............................................................................32
INSTALLATION AND START-UP OF ESPRESSO MACHINE ........................................33
TURNING ON/OFF .............................................................................34
DRIPTRAYADJUSTMENT...................................................................... 35
MAKING COFFEE ...............................................................................36
MAKING CAPPUCCINO .........................................................................37
MAKING HOT WATER ...........................................................................38
PREPARING COFFEE AFTER GENERATING STEAM ...............................................39
DESCALING....................................................................................40
CLEANING AND MAINTENANCE ................................................................42
TECHNICALDATA...............................................................................44
RECOMMENDATIONS ..........................................................................44
TROUBLESHOOTING ...........................................................................45
WARRANTY LIMITATIONS ......................................................................46
USING THE ESPRESSO MACHINE...........................................................................
...............................................................
CLEANING THE ESPRESSO MACHINE.......................................................................
IN CASE OF MALFUNCTIONING ............................................................................
IMPROPER USE OF THE ESPRESSO MACHINE
INSTALLATION OF THE ESPRESSO MACHINE
MACHINE SIGNALS
EN
table of contents

28
machine parts
A
B
C
D
E
F
G
H
I
L
TEMPERATURE LED SIGNALS
coffee ok - steam ok - signals
when machine is heating,
when temperature is not correct
to make coffee, and signals
a warning if boiler is empty
LEVER TO OPEN/ CLOSE CAPSULE
COMPARTMENT
(INTERNAL) CAPSULE
COMPARTMENT
BREWING UNIT
HOT WATER/STEAM WAND
(PANNARELLO)
CUP HOLDING GRILL
FLOATING DEVICE
TO SIGNAL FULL TRAY
LEVER TO RAISE DRIP TRAY
SELECTOR KNOB
to deliver coffee -
hot water - steam
STEAM SWITCH
A
B
C
D
E
F
G
H
I
L

EN
29
POWER CORD
CUP HOLDER
WATER TANK
CONTAINER FOR USED
CAPSULES (also contains
some liquid)
MAIN ON(I)/OFF(O)
SWITCH
DATA PLATE (below)
M
N
O
P
Q
R
M
N
OP
R
Q

30
USING THE ESPRESSO MACHINE
- This machine is intended for household use only. Any other use is
considered improper and therefore dangerous
- Do not use the machine for purposes other than its intended use
- Unplug the powercord from the electrical socket when the machine
is not in use
- Do not touch hot surfaces. Use handles and knobs
- This machine is manufactured to "make espresso coffee" and to
"prepare hot beverages": use care to prevent scalding due to water
jets or any improper use of the machine
- The machine is not designed to be used by people (including chil-
dren) with limited physical, mental or sensory abilities or insufficient expe-
rience and/or skills, unless they are supervised by a person responsible
for their safety, who provides instructions on how to use the appliance
- Do not allow children to play with the appliance. Close supervision
is necessary when any appliance is used by or near children
- Use the machine indoors only and away from atmospheric agents
- To protect against fire, electric shock or personal injury do not im-
merse the cord, the plug or the body of the machine in water or any
other liquid
-
- Do not install the machine in an area where the temperature may
be at or below than (if water freezes, the appliance may be
damaged) or higher than
- Check that the electric voltage corresponds to the requirements indi-
cated on the data plate on the machine. Connect the machine only to
Read the instructions carefully
0°C/30°F
40°C/140°F
- Do not place the machine on,
or near, electrical or gas burners
or inside a hot oven
- The machine must be turned
on only when being used. After
use, it must be turned off by mov-
ing the main selector knob to the
" " position and disconnecting
the plug from the power socket
- Before unplugging the machine make sure that the ON/OFF
switch is off and is not lit up
- Using attachments not recommended by the manufacturer may re-
sult in fire, electric shock, or personal injury
- Do not let the cord hang over tables or countertops or touch hot sur-
face
0
1
INSTALLATION OF THE ESPRESSO MACHINE
When using electrical appliances always follow the safety
precautions below
important safeguards
1

31
- Unplug from outlet when not in use and before cleaning. Allow ma-
chine to cool before putting on or taking off parts, and before cleaning
the appliance
- Before unplugging the machine check that the main selector switch
is in the " " position
- Wait until the machine is cool before cleaning
- Clean the body and attachments with a wet cloth and then wipe with
a dry cloth. Do not use detergents or abrasive cleaners
- Do not allow the machine to get wet or immerse in water, partially
or fully
0
- Do not use the appliance if the cord or plug are damaged or if the
appliance shows signs of malfunctioning or if it has been damaged in
any way. Send the machine to the nearest authorized technical assi-
stance center to be checked or repaired. If the power cord is dama-
ged, it must be replaced by the manufacturer or an authorized techni-
cal assistance center
- In case of damage or malfunction, turn off the appliance and do not
tamper with it. For repairs contact a technical assistance center authori-
zed by the manufacturer and request the use of original spare parts
only. Failure to comply with these instructions may compromise safe
operation of the machine and will not be covered by warranty
- This appliance is intended for household use only. Any other use is
to be regarded as improper
- The manufacturer is not liable for accidents caused by lack of or non-
conformity to existing legislation on grounding requirements
- The manufacturer is not liable for possible damage caused by im-
proper, incorrect or unreasonable use
CLEANING THE ESPRESSO MACHINE
IN CASE OF MALFUNCTIONING
IMPROPER USE OF THE APPLIANCE
a grounded power socket with minimum voltage of if power re-
quired is and if power required is
- If the plug and the socket are not compatible, have the plug re-
placed by qualified personnel
- Place the machine on a countertop away from water taps and sinks
- After removing the packaging, check that the appliance is in perfect
condition before installation
- Do not allow children to play with the packaging materials from the
machine
6A
230Vac 12A 110Vac
EN
SAVE THESE INSTRUCTIONS

32
machine signals
BLUE Light solid
The machine is ready to make an espresso, or produce hot water
BLUE Flashing
The machine is warming up to make espresso and/or hot water
YELLOW Light solid
The machine is ready to steam
YELLOW Flashing
The machine is warming up to create steam
RED Light solid
Replenish the water system; fill the water tank and dispense hot water
RED Flashing Slowly
Boiler temperature too high to make coffee, circulate water through system by dispensing hot
water until the LED turns blue
RED Flashing Quickly
Capsule compartment open during coffee extraction, hot water or steam
CAUTION! SCALDING DANGER!!
Thanks to the Multi-purpose LED screen, the machine guides the user for correct operation
YELLOW
RED
BLUE

EN
33
CAUTION: make sure that the capsule compartment is closed before set-
ting the selector knob to steam and/or activating steam or hot water, or ex-
tracting coffee. Never open the compartment during the delivery of steam,
hot water or coffee A
installation and start-up of espresso machine
Before connecting the machine to a power supply, carefully read the safeguards listed in the previous chapter
Install the cup stand (included in the package) on the top part of the machine; insert the feet in the holes and
press firmly
Remove the water tank by tipping top of tank slightly backwards first . Fill the tank with fresh drinking water until
the MAX mark is reached .
Insert the tank placing the back lower edge (curved) in place first and then tipping the tank forward
Make sure that the selector knob is in the central position
Insert the plug into the power socket. Consult the following chapter to switch on the appliance
CAUTION: always fill the tank with still fresh drinking water only. Hot water or
other liquids may damage the tank. Do not use the machine without water
1
2
3
4
5
6
N.B. We suggest keeping the original package (at least during the
warranty period) in case the machine needs to be sent to the technical
assistance center for repair
H2
O
3
24
5
1
6
A

34
turning on/off
Before switching on the machine check the water level in the tank; if
necessary add water as described previously
To switch the appliance on, push the main on/off switch and move it into
the " " position
As the appliance warms up; the temperature LED is blue and flashes
When water is flowing regularly, move the selector knob back to the central
position
Place the empty container under the coffee group and rotate the selector
knob clockwise
After having deliverd approx. 50 cc of water, move the selector knob back
to the central position
I
The water in the system must be circulated (only upon start-up or
when the tank is emptied)
To switch the machine off, push the main selector switch and move it
into the "0" position; never disconnect the plug from the power
socket when the appliance is switched on
Do this by placing an empty container under the steam wand and rota-
ting the selector knob counterclockwise until a few ounces of water flow
into the container
Note: if the appliance has not been used for a long period, we suggest
running some water through the coffee group into an empty container
without inserting a capsule
1
2
5
6
5
3
4
BLUE
2
1
4
3
6
5

EN
35
drip tray adjustment
The X8 appliance is designed to adust to any type of cup you choose
To adjust the drip tray, pull the lever located under the tray
When the desired position has been reached, pull the lever:
position recommended for large cups
position recommended for small cups
Note: the adjustment must be made before starting the delivery of coffee
1
2
3
3
21

36
making coffee
WARNING:
- Capsules are single-dose and can not be used to make two coffees
- Remember to clean the drip tray and empty the used capsule container
- Remember to replace the water in the water tank frequently
The X8 machine is designed to function exclusively with “Metodo Iperespresso” capsules
Make sure that the temperature LED is blue and lit solidly
Place a cup under the coffee group . Unlock and lift the opening lever of the capsule compartment until the cap-
sule is ejected and the empty capsule holder falls back to its normal position (if the holder contains a capsule, it
will be expelled and dropped into the used capsule container)
Insert the capsule as shown in the picture and make sure that it is inserted correctly
Lower the lever completely to close the compartment . Rotate the selector knob clockwise; the device com-
pletes the pre-infusion and then coffee is delivered . When the coffee has reached the desired level, stop the de-
livery by moving back the selector knob into the central position
Note: the capsule must slide easily into the compartment; if this is not the case, change capsule
1
2
3
4
5
6
Note: the brewing cycle consists of a first phase called "pre-infusion" (short injection of water in the capsule followed by a
pause) lasting about 3 seconds and a second phase for brewing
21 4
6
5
3

EN
37
WARNING:
- Contact with steam and the steam nozzle may cause serious burns
- Always position the pannarello wand above the drip tray
- NEVER open the capsule compartment while using the steaming function: SCALDING DANGER
- If no steam is produced after 30 seconds, the machine switches back to normal operation conditions (see paragraph on preparing a coffee after generating steam)
making cappuccino
The machine is equipped with a steam arm to froth milk and prepare one
or more cappuccinos
Prepare one or more coffees following the steps outlined below
Make sure that the capsule compartment is closed
Froth the milk as follows:
Remove the capsule from the unit. Press the steam button ; the temper-
ature LED begins to flash and turns yellow
When the LED is lit solidly, the machine is ready to steam
Take fresh well-chilled milk and pour it into a pitcher (preferably metal)
Turn the steam knob counterclockwise , allow any residual water to exit
the nozzle until steam is produced and close the steam knob by turning it
briefly clockwise
Immerse the steam arm in the milk, turn the steam knob counterclockwise
and wait for the milk to froth
Stop by moving the knob back to the central position
A
1
2
4
3
Note: only when the pannarello wand is cold, disassemble the external
part and wash it with warm water to remove milk residue 5
YELLOW
3
45
1
A
2

38
making hot water
The steam nozzle fitted to the machine can also heat up water
Remove the capsule from the unit and any milk residue from the steam nozzle
Press the steam button ; the steam icon on the front display flashes to indicate that the machine is
heating up
Wait for the steam switch to light up (machine ready) followed by a short beep
Fill a metal pitcher with the desired quantity of water to be heated
Immerse the steam nozzle in the water and open the steam knob by turning it counterclockwise
After reaching the desired temperature, move the knob back to the central position
1
2
3
45
6
WARNING:
- Contact with steam and the steam nozzle may cause serious burns
- Always position the pannarello wand above the drip tray
- NEVER open the capsule compartment while using the steaming function: SCALDING DANGER
YELLOW
3
5
6
2
14

EN
39
After generating steam, the appliance cannot produce coffee until the correct
coffee temperature has been reached (the temperature LED turns solid
blue), or the taste of the coffee will be ruined
Therefore, after steaming, it is important to return to coffee mode by pushing
the steam button
During the cooling stage (approx. 15 minutes) the temperature LED turns
red and is flashing
To cool down the machine faster (approx. 1 minute) follow these
instructions:
Place an empty container under the steam arm
Rotate the selector knob counterclockwise
Run hot water through the machine until the temperature LED turns blue
Move the selector knob back to the central position the machine is ready
to make an espresso
1
2
3
4
5
6
preparing coffee after generating steam
RED
BLUE
5 6
34
21

40
Switch the appliance off
Remove the watertank and empty the residual water
Fill the tank with the descaling solution according to the instructions reported on the descaling product
package
Place an empty continer under the steam spout
Switch the machine on by moving the main selector switch to the " " position
Without waiting for the machine to warm up, start running water through the machine by turning the knob
counterclockwise
After 30 seconds move the knob back to the central position
Switch the machine off by moving the main selector switch to the " " position and empty the container
A
B
C
DI
E
F
G0
2
3
4
5
6
7
8
The formation of limescale is a natural consequence of using of the machine
Descaling is necessary every 2-3 months; if the water is very hard, descaling should be done more frequently
Descaling may be done with a non-toxic descaling product for coffee machines available in the market
descaling
Note: to descale, remove the pannarello wand from the steam spout: loosen the ring nut without removing it
and disassemble the top part of the pannarello wand from the steam spout 1
CAUTION: never use vinegar for descaling purposes
34
2
1
5
6

EN
41
H
ICH
L
MI
N
O
P
QN
Leave the descaling solution inside the machine (switched off) for approx. 10-15 minutes
Repeat steps ( ) to ( ) until the descaling solution in the tank is completely used
When the descaling solution is finished, remove the water tank, rinse it carefully and fill it again with fresh
drinking water
Turn the machine on by moving the main on/off switch to the " " position
Without waiting for the machine to warm up, run water through the machine by turning the knob counter
clockwise
When the tank is empty, move the knob back to the central position
Empty rinsing water from the container
Fill the water tank again and repeat the steps described from point ( )
After performing a second rinsing cycle, fill the tank again. Now the appliance is ready for use. After descaling has
been completed, replace the pannarello wand on the steam tube
9
10
11
12
WARNING:
If descaling is not performed as needed, calcium may cause malfunctioning not covered by the warranty
It is advisable to use our descaling agent
Do not use vinegar, lye, salt, formic acid because they may damage the machine
The descaling solution must be totally disposed of according to the specific laws and regulations of your area
H2
O
910
8
7
11
12
30

42
The appliance and its components must be cleaned at least once a week
Keep the water in the tank fresh; wash the tank and fill it daily with fresh drinking water
Do not use ethyl alcohol, solvents, abrasive sponges and/or aggressive chemicals
Switch the appliance off and disconnect the plug from the power socket
Remove the water tank and wash it
Remove the grill and wash it with warm water
Remove the drip tray and wash it with warm water
Remove the end of the pannarello wand and wash it with warm water
Loosen the ring nut holding the top part of the pannarello wand
-
-
-
-
-
-
1
2
3
4
5
6
CAUTION: do not dry the machine and/or its components in a microwave oven and/or traditional oven
cleaning and maintenance
234
1

EN
43
-
-
- Extract the used capsule tray by grasping and pulling firmly
-
-A
-
Remove the top part of the pannarello wand and wash it with warm water
Wash the steam spout with a moist cloth
Empty the residue in the capsule container (Caution: used capsules and some liquid from the coffee extraction
will be in the tray)
Insert the capsule container as follows:
lign the front part in the machine
Insert the back part by pushing it firmly inside
7
9
10
8
78
9
10
6
5

44
technical data
To enjoy a high quality espresso, remember to:
- Change the water in the tank daily and empty the drip tray at least
once a week
- Use water with low calcium content to reduce deposits inside the
machine
- Use the cup warmer
Casing: ABS
Internal boiler: Stainless steel
Tank: 1.2 liters
Pump: 15 bar
Used capsule tray capacity: 7 capsules
Steam arm
See plate on the appliance
Cup holder
Electric cord length: 1.5 m
Weight without packaging: 5 Kg
Voltage: 230 V, 50 Hz (EU); 120 V, 60 Hz (USA)
Power: 1050 W (EU); 1100W (USA)
Size: 200 x 340 x 350 mm
The manufacturer reserves the right to make changes
or improvements without notice
recommendations