Metos 3500 User manual

INDUCTION GRIDDLES
GRIDDLE-LINE
TYPE: 3500, 5000, 7000, 10000
Installation and Operation Manual
S/N: Rev.: 2.0

19.9.2006 Rev. 2.0
Dear Customer,
Congratulations on deciding to choose a Metos appliance for your kitchen activities. You
made an excellent choice. We will do our best to make you a satisfied Metos customer
like thousands of customers we have around the world.
Please read this manual carefully. You will learn correct, safe and efficient working meth-
ods in order to get the best possible benefit from the appliance. The instructions and hints
in this manual will give you a quick and easy start, and you will soon note how nice it is
to use the Metos equipment.
All rights are reserved for technical changes.
You will find the main technical data on therating plate fixed to theequipment. When you
need service or technical help, please let us know the serial number shown on the rating
plate. This will make it easier to provide you with correct service.
For your convenience, space is provided below for you to record your local Metos service
contact information.
METOS TEAM
Metos service phone number:...............................................................................................
Contact person:....................................................................................................................

19.9.2006 Rev. 2.0

19.9.2006 Rev.
1. General .......................................................................................................... 1
1.1 Symbols used in the manual .......................................................................................... 1
1.2 Symbols used on the appliance ...................................................................................... 1
1.3 Checking the relationship of the appliance and the manual .......................................... 1
2. Safety .............................................................................................................. 2
2.1 Safe use of the appliance ............................................................................................... 2
2.1.1 Changing the settings and adjustments .................................................................. 3
2.2 Safety instructions in case of a malfunction .................................................................. 3
2.3 Disposal of the appliance ............................................................................................... 3
2.4 Other prohibitions .......................................................................................................... 3
3. Functional description .................................................................................. 4
3.1 Construction .................................................................................................................. 4
4. Operation instructions ................................................................................. 5
4.1 Before using the appliance ............................................................................................ 5
4.1.1 Operating test ......................................................................................................... 5
4.2 Operation procedures ..................................................................................................... 5
4.3 After use ........................................................................................................................ 6
4.3.1 Cleaning ................................................................................................................ 6
4.3.2 Periodic service ...................................................................................................... 7
4.3.3 Out of operation .................................................................................................... 7
5. Installation ..................................................................................................... 8
5.1 Preparing the installation ............................................................................................... 8
5.2 Installation ..................................................................................................................... 8
5.3 Positioning the appliance ............................................................................................... 9
5.4 Electrical connections .................................................................................................... 9
5.4.1 Single phase supply ............................................................................................... 9
5.4.2 Three phase supply .............................................................................................. 10
5.5 Measures after the installation ..................................................................................... 10
6. Technical specifications .............................................................................. 11

19.9.2006 Rev.

19.9.2006 Rev. 2.0
General
1
1. General
Carefully read the instructions in this manual as they contain important information re-
garding proper, efficient and safe installation, use and maintenance of the appliance.
Keep this manual in a safe place for eventual use by other operators of the appliance.
The installation of this appliance must be carried out in accordance with the manufactur-
er’s instructions and following local regulations. The connection of the appliance to the
electric and water supply must be carried out by qualified persons only.
Persons using this appliance should be specifically trained in its operation.
Switch off the appliance in the case of failure or malfunction. The periodical function
checks requested in the manual must be carried out according to the instructions. Have the
appliance serviced by a technically qualified person authorized by the manufacturer and
using original spare parts.
Not complying with the above may put the safety of the appliance in danger.
1.1 Symbols used in the manual
This symbol informs about a situation where a safety risk might be at hand.Given instruc-
tions are mandatory in order to prevent injury.
This symbol informs about the right way to perform in order to prevent bad results, appli-
ance damage or hazardous situations.
This symbol informs about recommendations and hints that help to get the best perform-
ance out of the appliance.
1.2 Symbols used on the appliance
This symbol on a part informs about electrical terminals behind the part. The removal of
the part must be carried out by qualified persons only.
1.3 Checking the relationship of the appliance and the manual
The rating plate of the appliance indicates the serial number of the appliance. If the man-
uals are missing, it is possible to order new ones from the manufacturer or the local rep-
resentative. When ordering new manuals it is essential to quote the serial number shown
on the rating plate.

19.9.2006 Rev. 2.0
Safety
2
2. Safety
2.1 Safe use of the appliance
The table-top Griddle-Line induction griddles are especially suitable as frying units in the
kitchen for the preparation of meals. They can be used for frying and keeping food warm.
Information signs mounted directly on the griddle must be observed at all times and kept
in a fully legible condition.
Danger for persons, for the environment and for the griddle can result from non-observ-
ance of the safety information. Certain risks may be associated with non-observance of
precautions, including:
• Danger to persons through electrical causes.
• Danger to persons through an overheated heating surface.
• Danger to persons through overheated oil or grease.
• Danger to persons through a hot case.
The safety information contained in these instructions for use, the existing national regu-
lation for the prevention of accidents as well as any internal working, operating and safety
regulation stipulated by the operator must be observed.
Any risks from electric power must be eliminated. The induction unit shall only be used
if the installation of the electricity is fitted by an approved installation contractor in ac-
cordance with specific national and local regulations.
• The induction Griddle-Line unit must only be used for frying or keeping warm of
food.
• Never heat-up frying devices as e.g. pans on the griddle plate as this could lead to
thermal damage or destruction.
• Do not put any piece of paper, cardboard, cloth, etc. on the frying area, as this
might initiate a fire.
• Do not place credit cards, phone cards, cassette tapes, or other objects that are sen-
sitive to magnetism on the heating surface.
• As metallic objects are heated up very quickly when placed on the frying area, do
notplace any other objects (closed cans, aluminium foil, cutlery, jewellery, watch-
es etc.) on the induction griddle.
• Persons with a pacemaker should ask their doctor whether they are safe near an in-
duction griddle or not.
• The induction griddle has an internal air-cooling system. Do not obstruct air inlet-
and air outlet-slots with objects (cloth) as this would cause an overheating and the
griddle would switch off.

19.9.2006 Rev. 2.0
Safety
3
• Avoid liquid entering into the griddle. Do notlet water or food overflow the frying
area. Do not clean the griddle with a jet of water.
• If the frying area is cracked or broken, the induction griddle must be switched off
and disconnected from the electric connection. Don't touch any parts inside the
griddle.
2.1.1 Changing the settings and adjustments
Reconstruction of the griddle or changes to the griddle are not allowed. Contact the man-
ufacturer if you intend to make any changes to the griddle. To guarantee the safety, just
use genuine spare parts and accessories authorized by the manufacturer. The use of other
components voids all warranties.
2.2 Safety instructions in case of a malfunction
Do not open the induction griddle - dangerous electric voltage inside!
If the frying area is cracked or broken, the induction griddle must be switched offand dis-
connected from the electric supply. The griddle may only be opened by authorized service
personnel. Do not touch any parts inside the griddle.
2.3 Disposal of the appliance
When the life cycle of the induction griddle ends, make sure that it will be safely disposed
of.
Avoid abuse: The griddle may not be used by any person not havingthe appropriate qual-
ifications. Avoid that the griddle, provided for disposal, can be brought back into opera-
tion. The griddle is built up with common electrical, electromechanical and electronic
parts. No batteries are used.
The operator is responsible for a proper and safe disposal of the induction griddle.
2.4 Other prohibitions
The operating reliability of the griddles can onlybe guaranteed with proper use. The limit
values may be exceeded on no account.

19.9.2006 Rev. 2.0
Functional description
4
3. Functional description
3.1 Construction
The Griddle-Line induction griddles come in two different sizes, each of them in two dif-
ferent power ratings.
Builtin a robust case completely in stainless steel, the Griddle-Line units are compact and
powerful with a revolutionary „RTCS"-technology. The complete case is made of CrNi-
steel with a deep-drawn griddle plate set-in above. Rounds and a smooth surface enable a
rational and optimalcleaning. Thetemperature can be chosen via a stepless regulator. The
set and actual frying surface temperatures are visualized on the LCD display.
• Real-time Temperature Control System allows a temperature regulated frying
process with contactless temperature measurement and regulation in real-time.
• A special developed induction griddle plate with a HPCR-INOX surface coating.
• The temperature of the whole griddle surface is measured, regulated and checked.
• Instantaneous control of the frying temperature.
• State-of-the-art SMD-technology, regulated via microprocessor.
• A maximum of safety thanks to multiple functions of protection and checking.
• Electronic checking of the energy supply.
• Temperature regulation between 20° and 250°C.
• Short heat-up time from 20°-200°C in 4 ½ minutes.
• Exchangeable grease filter.
• Europatent EP 0858722.
• Fulfils the latest directions: VDE EN 60335-1/-2/36, CE-conforming UL 197;
CAN/CSA/C 22.2 No. 109, NSF 4-1996.

19.9.2006 Rev. 2.0
Operation instructions
5
4. Operation instructions
4.1 Before using the appliance
4.1.1 Operating test
The frying area is warmed up to the set-in temperature. To avoid injuries (burning) do not
touch either griddle plate or case.
Turn the temperature power switch from position 0 to a required position. We recommend
a temperature of 200°C. During the turning of the switch and for two seconds afterwards,
the LCD display shows the set temperature. After the two second period, the display
shows again the actual temperature of the griddle plate.
Turn the power switch in „OFF" position, the LCD display will blank out.
If the display does not function, check the following:
• Is the griddle connected to the mains supply?
• Is the temperature knob in „ON" position?
If in spite of all positive controls and tests the griddle doesn't work, refer to the Fault Find-
ing Section.
4.2 Operation procedures
The Griddle-Line unit isimmediately ready for use.By choosing the required temperature
and, while the temperature is shown on the LCD display, energy is transferred to the grid-
dle plate. The temperature is chosen by turning the power switch.
We recommend to use frying temperatures between 170° and 200°C.
Only a little oil or grease is needed on the HPCR-INOX griddle surface. For frying bread-
ed meat, use a little bit more oil or grease. When heating up oil, monitor the frying area
regularly in order to avoid overheating or burning.
Turn the pieces on the griddle plate with the spatula which is delivered with the unit. The
use of sharp knifes or forks can damage the griddle surface!
The griddle will recognize and react to even smallest drops in the surface temperature
when adding cold food on the griddle plate. The griddle will react immediately and adjust
the temperature back on the right level. Because of this, there is no need to pre-heat the
griddle to a higher temperature before starting the process.
After switching the power switch „OFF", the frying process will be stopped.

19.9.2006 Rev. 2.0
Operation instructions
6
4.3 After use
4.3.1 Cleaning
Depending on the degree of soiling,the frying area shall be cleaned repeatedly but at least
once a day.
• To clean the frying area from soiling, use only pure water. You can add ph-neutral
detergents produced on a base of non-ionic tensides.
• Limeresidue on the frying area can be removed with a commercial lime detergent.
• For the cleaning of the frying area, please use the stainless steel sponge and the
special griddle spatula which are delivered together with the Griddle-Line unit.
• For any cleaning between the frying processes, we recommend the use of ice
cubes. The soiling will dissolve quickly and can easily be removed with the griddle
spatula.
• For a daily cleaning, please cool down the frying area to about 50°C.
• Avoid strong detergents and dissolvers as well as alkaline detergents. Depending
on concentration, reaction time and temperature, they could lead to a damage of
the HPCR-INOX heating surface. Do not use scratching devices as steel wool or
scratching sponges as they could also damage the heating surface.
• Mechanical abuse such as strikes can lead to a shortened life cycle of the heating
surface.
• Do not clean the induction unit by running water, a jet of water or steam.
• The cleaning of the frying area can produce hot steams - danger of burning!
Make sure that no liquid can enter into the induction unit.
The unit is equipped with a removable grease filter under the front side of the unit. This
filterneeds to be cleaned periodically depending on the usage and the ambient air quality.
Before removing the filter, unplug the unit from the mains. The filter must be in place
again before plugging in the unit. The unit must never be used without the grease filter in
its place.

19.9.2006 Rev. 2.0
Operation instructions
7
4.3.2 Periodic service
A good maintenance of the induction griddle requires a regular cleaning, care and servic-
ing. The operator has to ensure that all components relevant for safety are in perfect work-
ing order at all times. The griddle has to be examined at least once a year by an authorized
technician.
Do not open the griddle, dangerous electric voltage inside.
The griddle may only be opened by authorized personnel.
4.3.3 Out of operation
If the griddle is not in use, make sure that the temperature knob is in the “OFF” position.
If you don’t use the griddle for a longer period (several days), unplug the unit. Make sure
that no liquid can enter into the griddle and do not clean the griddle with a jet of water.

19.9.2006 Rev. 2.0
Installation
8
5. Installation
5.1 Preparing the installation
Please observe the following rules:
• Check and ensure that the supply voltage matches the voltage given on the rating
plate.
• The electrical connections must satisfy local house installation regulations. The
valid, national and local electrical regulations must be observed.
• This induction appliance is equipped with a cablewhich can be connectedwith the
necessary plug to the socket. The socket must be easily accessible to disconnect
the unit from the net.
• When faulty-current circuit breakers are used, they must be rated for a breaking
current of 30mA or more.
• This induction unit is equipped with an air cooling system. Make sure that the air
supply and air exhaust are not blocked (wall, fabric etc.).
• This induction unit is equipped with an additional grease filter. Make sure that the
induction unit does not take in hot ambient air (concerns units standing side by
side, or one behind the other, or standing near a frying pan or an oven).
• The induction unit must not be placed near or on a hot surface.
• The air intake temperature must be under 40°C.
• The operating staff has to make sure that installation is done by qualified person-
nel.
5.2 Installation
The griddle is equipped with a cable. It has to be connected to a wall socket. If no plug is
installed at the cable, do the connection according to the information in “Electrical con-
nections”. The installation for the electricity must be carried out by approved installation
contractors in accordance with specific national and local regulations. The installation
contractors are responsible for the correct layout and installation in conformity with all
safety regulations. The warning signs and rating plates put up to the appliances must
strictly be followed. Check and ensure, that the mains voltage matches with the voltage
given on the rating plate.
The griddle must always be installed on a clean and even surface (table, base, etc.) at its
designated site. The griddle stands on non-slip rubber feet and is not permanently in-
stalled. It must be installed in such a way that it cannot fall down or move in a uneven
position. The conditions for the “positioning the appliance” must be guaranteed.

19.9.2006 Rev. 2.0
Installation
9
5.3 Positioning the appliance
The griddle has to be set up on an even surface. The air inlet and air outlet must not be
obstructed, the area must be able to carry a loading of 80 kg. The griddle does not need to
be fixed on the table. The temperature knob to operate the griddle must be easily accessi-
ble.
Installation ambience:
• Max. ambient temperature: Storage > -20 - +70°C, function> + 5 - +40°C
• Max. relative humidity of air: Storage > 10% - 90%, function> 30% - 90%
5.4 Electrical connections
The electrical connection must be done by an expert.
5.4.1 Single phase supply
Induction appliance: Type Griddle-Line 3500. The griddle is equipped with a cable con-
forming to the national regulations.
Make sure that the plug is connected the right way:
• Phase: brown (Colour of the conductor)
• Neutral: blue (Colour of the conductor)
• Protective ground: green-yellow (Colour of the conductor)
d: minimal distance to the wall = 4 c
air inlet
side view
air outlet
d
Induktioliesi/ induktionsspis
/sivulta/ från sidan
ilmanotto/ luftintag ilmanlähtö/ luftutloppm
minimietäisyys seinään
minimiavstånd till väggen

19.9.2006 Rev. 2.0
Installation
10
If the voltage is wrong, the griddle can be damaged.
• Voltage: max + 6 / -10 % from the connection voltage
• Frequency: 50 Hz / 60 Hz
• Preliminary fuse: 16A- Griddle-Line 5000 and 7000; 16A - Griddle-Line 10000.
5.4.2 Three phase supply
Induction appliance: Model Griddle-Line 5000, 7000, 10000. The griddles are equipped
with a cable conforming to the national regulations.
Make sure that the plug is connected the right way:
• Phase 1,2,3: black / brown/blue (Colour of the conductor) or other colours, except
of grey, green or white
• Protective ground: green / yellow (Colour of the conductor)
If the voltage is wrong, the griddle can be damaged.
• Voltage: max + 6 / -10 % from the connection voltage
• Frequency: 50 / 60 Hz
• Preliminary fuse: 10A - Griddle-Line 5000 and 7000
• Preliminary fuse: 16A - Griddle-Line 10000
5.5 Measures after the installation
Turn the temperature knob in the OFF-position before connecting the griddle to the volt-
age supply. Before carrying out function tests, the operator has to know how to handle the
induction Griddle-Line unit.
Place the induction Griddle-Line unit at its final place and connect it to the mains supply.
Make sure that the unit is standing well and cannot move.
Remove all objects fromthe griddle plate. Verify if this area isneither cracked nor broken.
If the griddle plate is cracked or broken, immediately switch the griddle off, disconnect
the griddle from the outlet and contact your local service.

19.9.2006 Rev. 2.0
Technical specifications
11
6. Technical specifications
Installation drawing

Installation drawing
I
521mm (20.5")
)"3,71(mm044
195mm (7.7") 175mm (6.9")
air exhaust
wall
d d: min. distance to wall = 40mm (1.6")
air
exhaust
70mm (2.7")
air supply
grease filtre
removable 220mm (8.7")
)"8.7(mm891
net cable
griddle top
)"8.11(mm003
475mm (18.7")
grease drawer
I
646mm (25.4")
"2.42(mm566)
285mm (11.2") 261mm (10.3")
air exhaust
wall
d d: min. distance to wall = 40mm (1.6")
air
exhaust
70mm (2.7")
air supply
grease filter
removable 220mm (8.7")
"8.7(mm891 )
net cabel
griddle top
"7.02(mm525 )
600mm (23.6")
grease drawer
Griddle-Line 3500, 5000
Griddle-Line 7000, 10000

19.9.2006 Rev. 2.0
Technical specifications
13
GRIDDLE-LINE
Item Type Specification
Lamp 24V DC/max. 40mA (red)
Key pad and LED display
Dimensions WxDxH 3500, 5000 521x440x198 mm
Dimensions WxDxH 7000, 10000 646x665x198 mm
Voltage 3500 230V
Voltage 5000,7000,10000 400V
Current 3500 16 A
Current 5000 10 A
Current 7000 10 A
Current 10000 16 A
Power 3500 3,5 kW
Power 5000 5,0 kW
Power 7000 7,0 kW
Power 10000 10,0 kW
Weight 3500 22 kg
Weight 5000 22 kg
Weight 7000 45 kg
Weight 10000 45 kg
Operation conditions:
Max. tolerance of the nominal supply +6/-10%
Supply frequency 50/60 Hz
Protection class IP X0