MF DIGITAL DIRECTOR PRO series Assembly instructions

www.mfdigital.com
Q
QU UI IC CK K
C
CO ON NN NE EC CT T
G
GU UI ID DE E
For a complete guide of instructions, see the
manual located on the Manual CD that was
shipped with your system.

Software Manual is
located on Manuals CD
packaged with your
system.

S
SH HI IP PM ME EN NT T
C
CO ON NT TE EN NT TS S
Director Series Loader
Serial Cable
Power Cable
Director Pro PC
15” LCD Monitor
Keyboard & Mouse
LAN Connection Guide
LAN Cable
Quick Connect Guide
User’s Manual CD
System Backup Software CD

1. Locate the front of the mounting plate as indicated by the yellow circle in the picture
on the right.
2. Slip the groove of the mounting plate around the white plastic knob. See picture
above (yellow circle).
3. The threaded screw located at the rear of the mounting plate will line up with the
“U”shaped housing located on the rear of the Director Pro Series Unit. See picture
above (blue circle).
4. After mounting the Printer, be sure to push the printer all the way forward then use the
Thumbscrew to secure the printer to the Director Pro Series Unit.
Front Rear
K
E
Y
Mounting & Connecting Your PicoJet 6000
Printer with the MF Digital Director Pro Series.

Power Cable
Keyboard Cable
Serial Cable from Loader
Monitor Cable
USB Mouse Cable
USB Cable from PicoJet Printer
Director Pro PC
Pico Jet 6000 Printer
Communication Cable
Connect from Picojet
(6 pin) to Loader
Serial Port (9 pin)
Loader Power Cable
Power Cable for
Picojet 6000 Printer
USB Connection
to Director Pro PC
FireWire B Cables
(2) to Direcor Pro
PC
Serial Cable from
Loader to Director
Pro PC
Firewire B Cables (2) from
Drive Tower
How to Wire Your PicoJet 6000 Printer with the
MF Digital Director Pro Series PC.

1. Locate the front of the mounting plate as indicated by the yellow circle in the picture on
the right.
2. Slip the groove of the mounting plate around the white plastic knob. See picture above
(yellow circle).
3. The threaded screw located at the rear of the mounting plate will line up with the
“U”shaped housing located on the rear of the Director Pro Series Unit. See picture above
(blue circle).
4. After mounting the Printer, be sure to push the printer all the way forward then use the
Thumbscrew to secure the printer to the Director Pro Series Unit.
Front Rear
K
E
Y
Mounting & Connecting Your Prism Plus Printer
with the MF Digital Director Pro Series.

Power Cable
Keyboard Cable
Serial Cable from Loader
Monitor Cable
Firewire B Cables (2) from
Drive Tower
USB Mouse Cable
Parallel Cable from Prism Plus
Printer
Serial Cable from Prism
Plus Printer
Prism Plus Printer
Communication Cable
Connect from Prism
Plus (6 pin) to PC
Serial Port(9 pin)
Loader Power Cable
Serial Cable from
Loader to Director Pro
PC
Power Cable
Parallel Cable
from Prism
Plus to
Director Pro to
PC
FireWire B
Cables (2) to
Direcor Pro PC
How to Wire Your Prism Plus Printer with the
MF Digital Director Pro Series PC.

Genuine MF Digital Consumables
Thermal Printer Supplies
Thermal CD/DVD Printer Ribbons
The Gold Standard
Part# Product Description
CDP-PRN-BK 750' Black Ribbon for Prism Plus (Fine Line Print)
CDP-PRN-BLK 850' Black Ribbon for Spectrum 2 Printers
CDP-PRN-RED 656' Red Ribbon for Prism Plus & Spectrum 2 Printers
CDP-PRN-BLUE 656' Blue Ribbon for Prism Plus & Spectrum 2 Printers
CDP-PRN-GRN 656' Green Ribbon for Prism Plus & Spectrum 2 Printers
CDP-PRN-MULTI 656' Multi Ribbon for Prism Plus
Ink Jet Printer Supplies
Inkjet CD/DVD Printer Cartiridges
Part# Product Description
M56B Black 19ml Ink Cartridge for PicoJet Inkjet Printer
M57C Color 17ml Ink Cartridge for PicoJet Inkjet Printer
M58P Photo 17ml Ink Cartridge for PicoJet Inkjet Printer
www.mfdigital.com