MGA Entertainment Little Tikes Dino Bouncer User manual

B.
A.
Illustrations are for reference only. Styles may vary from actual contents.
487736
CONTENTS
AGES 2-6 YEARS
C. 2 Repair Patches
D. 1 Foot Pump
A. 1 Dino Bouncer™
B. 1 Slide
ADULT ASSEMBLY AND SUPERVISION REQUIRED.
Please keep this manual as it contains important information.
ADULT SUPERVISION AND SET UP REQUIRED. This product should be inated or deated by a competent adult.
1. Not for outdoor use.
2. Minimum clearance zones of 6.6 ft. (2 m) in any direction are required.
3. Keep the area around the product clean and clear of objects to prevent slips and falls.
4. DO NOT allow attachment of items such as jump ropes, pet leashes, cables, etc., to product as they may cause a strangulation hazard.
5. DO NOT drag the unit as doing so may cause irreparable damage.
6. Ensure the play area is free from hazards such as furniture, walls, sharp objects and other hard surfaces before inating the unit and
playing in it.
7. DO NOT leave children unattended at any time.
8. DO NOT use the unit if it is wet as it may become slippery.
9. DO NOT allow children to play in the product until it is fully inated.
10. Children must remove helmets, loose clothing, scarves, headgear, shoes and glasses, as well as any sharp objects from their pockets,
as they may puncture the bouncing surface.
11. Toys and other objects should never be allowed inside the bouncer.
12. Keep pets away from the product.
13. Children should bounce away from others and stay away from openings and side walls.
14. DO NOT allow food, drink or gum inside unit.
15. Maximum user weight is 60 lbs. (27 kg). Total weight of children must not exceed 120 lbs. (54 kg).
16. No more than 2 children should play on the bouncer at the same time.
17. DO NOT use extension cords with this product.
18. THIS IS NOT A FLOTATION DEVICE. DO NOT USE IN OR NEAR WATER.
19. DO NOT allow children to play together who are unevenly matched in weight and height.
20. Prior to deating, remove all children.
21. Always deate product after use, and store indoors.
22. Users must be discouraged from attempting any unauthorized modication.
23. Remove the plug from the socket before use.
C.
D.
The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that this product is free of defects in materials or
workmanship for 90 days from the date of purchase (dated sales receipt is required for proof of purchase). At the sole election of The Little Tikes
Company, the only remedies available under this warranty will be either replacement of the defective part or replacement of the product. This
warranty is valid only if the product has been assembled and maintained per the instructions. This warranty does not cover abuse, accident,
cosmetic issues such as fading or scratches from normal wear, or any other cause not arising from defects in material and workmanship. U.S.A.
and Canada: For warranty service or replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183 or write
to: Consumer Service, The Little Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for
purchase after warranty expires - contact us for detail. Outside U.S.A. and Canada: Contact place of purchase for warranty service.
Indoor Bouncers Warranty: We warrant to the original purchaser that the material in this product is free of defects in materials or workmanship
for 90 days from the date of purchase, (dated sales receipt is required for proof of purchase). This warranty gives you specic legal rights, and you
may also have other rights, which vary from state/country to state/country. Some states/countries do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not apply to you. *The warranty period is three months for
daycare or commercial purchasers.
LIMITED WARRANTY
QUICK START
1. Clear an indoor area (see diagrams below) and place the folded Dino Bouncer™ inside the area.
2. Fully unfold the Dino Bouncer™ with the control panel near a 120 volt AC wall electrical outlet.
SETTING UP THE BOUNCER
An adult must set up and inflate the unit. Here’s how:
MINIMUM CLEARANCE ZONES
Make sure that there is a 2 m (6.6 ft.) obstacle-free zone
around the product.
2 m (6.6 ft.)
2 m (6.6 ft.)
2 m (6.6 ft.)
2 m (6.6 ft.)
2 m
(6.6 ft.)
2 m
(6.6 ft.)
41
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household waste. Please use designated collection points or
recycling facilities when disposing of the item. Do not treat old batteries as household waste. Take them to a designated recycling facility.
· To reduce the risk of electric shock, use indoors only.
· Remove the bouncer plug from the electrical outlet before cleaning.
· Allow the unit to cool down for 3 minutes after 5 minutes of continuous pump operation.
· The pump containts a thermal switch that will automatically shut down the unit if it gets too hot. To reset, turn the pump switch to OFF and
unplug the unit from the AC outlet to allow it to cool. The pump will function properly once normal temperatures are reached.
· Do not use the electric pump near wet surfaces or if water has entered the pump.
· Do not immerse the bouncer pump in water or cleaning liquid.
· Always keep the power cord away from hot surfaces. If the power cord or plug is damaged, contact consumer service.
· This appliance has a polarized plug (one blade is wider than the other). This plug will t in a polarized outlet only one way. If the plug does not
t fully in the outlet, reverse the plug. Do not change the plug in any way.
· Do not place the power cord under the bed, funiture or carpet coverings.
IMPORTANT PUMP INFORMATION
The pump is not serviceable. Do not attempt to service the pump.
Doing so may cause the warranty to be voided.
· SERVICING OF A DOUBLE-INSULATED PRODUCT:
In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a
double-insulated product, nor should a means for grounding be added to the product. Servicing of a double-insulated product requires
extreme care and knowledge of the system, and should be done only by qualied service personnel. Replacement parts for a double-insulated
product must be identical to those parts in the product. A double-insulated product is marked with the words "DOUBLE INSULATION" or
"DOUBLE INSULATED". The symbol may also be marked on the product.
DOUBLE
INSULATION
WARNING:
WARNING:
Dino Bouncer™
Little Tikes Consumer Service
2180 Barlow Road
Hudson, Ohio 44236 U.S.A.
1-800-321-0183
MGA Entertainment UK Ltd.
50 Presley Way, Crownhill, Milton Keynes,
MK8 0ES, Bucks, UK
[e-mail]
Tel: [phone]
© The Little Tikes Company, an MGA Entertainment company.
LITTLE TIKES® is a trademark of Little Tikes in the U.S. and other countries.
All logos, names, characters, likenesses, images, slogans, and packaging
appearance are the property of Little Tikes.
Printed in China
0322-0-E
www.littletikes.com
www.littletikes.co.uk
www.littletikes.com.au

Fig. 6
DEFLATING THE BOUNCER
CONNECTING THE SLIDE
To deate the bouncer:
13. Open the large air outlet near the control panel. (Fig. 6)
14. Turn the knob on the control panel to DEFLATE.
15. Once deated, turn the knob on the control panel to OFF, unplug the unit and store the cord inside the
control panel door. (Fig. 7)
Once the slide is inated it must be buckled to the bouncer. To do so:
11. Flip the slide over and position it onto the bouncer.
12. Once positioned, lift slide slightly on one side and connect four
buckles as shown (Fig. 5A) then repeat for the other side.
Fig. 7
MAINTENANCE
23
3. With the knob on the control panel in the OFF position, open the cord storage area door and carefully extend
the cord. (Fig. 1)
4. Plug the cord into the wall outlet.
5. Turn the knob on the control panel to INFLATE. (Fig. 1)
6. Allow the Bouncer to inflate until it is firm but the seams still show slight wrinkling then turn the knob to OFF.
(DO NOT over-inflate.)
NOTE: The knob must be completely centered at OFF to prevent deflation. (Fig. 1A)
7. Place the power cord in the control panel cord storage door prior to allowing children to play on the unit.
In the event the bouncer is accidentally punctured, an adult must perform the following steps:
1. Deflate the item, clean the punctured area with water and allow it to dry.
2. Cut a portion of the patch allowing approximately 11/2inches of excess patch material on all sides of the opening to be
patched and round the corners.
3. Remove the backing from the patch material, position the patch over the damaged area and smooth out any bubbles with a
paper towel.
4. Allow the item to sit for 30 minutes before re-inflating.
The product should be periodically examined for potentially unsafe conditions such as: damaged cord, plug, housing, etc.
In the event such damage is found, the product should not be used until properly repaired. Refer to the instructions for set-up,
storage, maintenance and care. To clean use mild detergent and water.
REPAIRING A PUNCTURE
INFLATING THE BOUNCER
INFLATING THE SLIDE AND TEETH
A small pressure release
opening (Fig. 2A) is
incorporated behind the
dinosaur’s head (Fig. 2).
This opening is not connected
to the main ination chamber
and poses no risk of deation.
Do not use the included repair
patches to cover this opening,
as it is important for
maintaining balance in the
dinosaur head.
Fig. 2 Fig. 2A
Fig. 1
OPEN
FOR
CORD
STORAGE
Fig. 1A
8. Open the inating plug cap in the airway as shown (Fig. 3A).
9. Blow up slide by mouth or use hand or foot pump (Fig. 3).
10. Once inated replace the plug cap immediately and press rmly.
NOTE: To deate the slide or teeth, remove the plug cap and insert
the deater into the airway to hold it open. Then press down
on the slide until all air has been expelled.
Fig. 3
Fig. 3A
Fig. 4
Fig. 4A
REPEAT STEPS FOR INFLATING THE TEETH.
Fig. 5
Fig. 5A
BUCKLES