MH MH-TB-21001 Installation instructions

MH-TB-21001
This is easy.
You don’t have to be a DIY
expert to assemble this product.
Just follow our instructions and
you will have a show-off worthy
addition in no time.
Ok, let’s
get started!
1
estimated
installation time
15-20 min.
people required
2+

2
what to do
care guide
Put on mood music!
To prevent damage to product, use the clean side
of package carton or rug as working surface for
assembly.
While assembling the product, tighten the bolts
up to 50%. Once all parts in place, only then
fully tighten the bolts.
Clean regularly with a soft and dry cloth.
To protect nish, avoid use of abrasive
cleaners.
Wipe up spills immediately. Please!

what’s included
(G)-Screw (M8X20mm),
14x
(F)-Lock Washer (Ø15mmxØ8mm),
14x
(E)-Flat Washer (Ø20mmxØ8mm),
14x
(I)-Allen Key (Ø4mmx110mm,),
1x
(H)-Screw (M6X10mm),
12x
3

product parts
Table Top
Left Metal Leg
Metal Rod
Metal Base
Right Metal Leg
A
B-Left B-Right
C
D
4

5
assembly instructions
Friendly Tip: Take a deep breath going in. This may be a tricky part, but nothing too
overwhelming. Just follow these steps to the T and the outcome will be worth it!
step 1:
step 2:
To set the base of the table,
join the table legs (B-Left &
B-Right) with the metal rod
and base (C & D). Turn the
table legs (B-Left & B-Right)
upside down and insert the
metal rod (C) and metal base
(D) as shown in this image.
Ensure there is no space in
between the areas joined.
To set the table frame, see
the highlighted areas in red
to know where to tighten the
Screws (H). Using the Allen
Key (I) tighten all Screws (H)
to join metal rod and base (C
& D) to the table legs (B-Left
& B-Right).

6
step 3:
step 4:
Next, turn the table top (A)
upside down and set the
metal base on top of it as
shown in this image.
See the areas highlighted in
red to know where to tighten
screws (G) and washers
(E & F).

7
Place them on top of each
other (F on top of E & G on
top of F). Using the Allen Key,
tighten all screws (G) to x the
base to the table.
step 5:
Pull on the ribbon to open the
drawer.
step 6:

8
Voila! Your desk is now assembled and
secure!
step 7:
step 8:
Using the Allen Key (I), detach
the handle tted inside the
drawer.
Place the handle outside the
drawer and re-attach using
the screws that you just
removed and tighten using
the Allen Key (I).

to err is human
Drop-tested packing,
double-checks, experienced
craftspeople, high-end materials-
we keep everything in mind to
ensure your furniture arrives at your
doorstep without any problems. But
mistakes can sometimes happen
because, well, to err is human. So, in
the event of missing parts, delivery
problems, damaged parts, please
reach out to our team. We will be
happy to x the problem!
9