MH MH-TB-21024 User manual

estimated
assembly time
10 : 00
people required
2 or more
MH-TB-21024
1

Ok, let’s
get started!
Put on mood music!
To prevent damage to product, use the clean side of
package carton or rug as working surface for
assembly.
In the event of missing or damaged parts, delivery
problems etc., please reach out to our team.
We will be happy to x the problem!
2

care guide
Clean regularly with a soft and dry cloth.
To protect nish, avoid use of abrasive cleaners.
Wipe up spills immediately. Please!
While assembling the product,
tighten the bolts up to 50%. Once
all parts are in place, only then
fully tighten the bolts.
3

A
Night Stand
x1
product
parts
4

5

assembly
instructions
Friendly Tip: Take a deep
breath going in. This may be a
tricky part, but nothing too
overwhelming. Just follow
these steps to the T and the
outcome will be
worth it!
6
While assembling the product, tighten the bolts up to 50%.
Once all parts are in place, only then fully tighten the bolts.

Start by placing night stand (A) upside-down on a rug/carton. Push
out the drawers taking this image as reference.
Take out the cardboard box and discard it; it is only for ease of
transportation.
step 1:
step 2:
A
7

Using a screwdriver, detach the knobs tted inside the drawers.
Place the knobs outside the drawers and re-attach using the screws
that you just removed and tighten using the screwdriver.
step 3:
step 4:
10

Place a spirit level on top of the surface to check alignment. Adjust
the levellers if needed.
step 5:
Voila! Your night stand is now assembled and secure!