MH MH-TB-891 User manual

estimated
assembly time
15 : 00
people required
2 or more
MH-TB-891, 892, 898
1

Ok, let’s
get started!
Put on mood music!
To prevent damage to product, use the clean side of
package carton or rug as working surface for
assembly.
In the event of missing or damaged parts, delivery
problems etc., please reach out to our team.
We will be happy to x the problem!
2

care guide
Clean regularly with a soft and dry cloth.
To protect nish, avoid use of abrasive cleaners.
Wipe up spills immediately. Please!
While assembling the product,
tighten the bolts up to 50%. Once
all parts are in place, only then
fully tighten the bolts.
3

B
Table Legs
x2
A
Tabletop
x1
C
Rod
x1
product
parts
4

(D) -Washer
(Ø18mmxØ8mm)
x4
(E)-Lock Washer
(Ø15mmxØ8mm)
x4
(F) -Bolt
(M6x20mm)
x4
(G) -Bolt
(M6x10mm)
x12
(H)- Allen key
(Ø4mmxØ110mm)
x1
what’s
included
5

assembly
instructions
Friendly Tip: Take a deep
breath going in. This may be a
tricky part, but nothing too
overwhelming. Just follow
these steps to the T and the
outcome will be
worth it!
6
While assembling the product, tighten the bolts up to 50%.
Once all parts are in place, only then fully tighten the bolts.

Start by placing tabletop (A) upside down. Taking this image as
reference, insert table leg (B) into the preinstalled rods on tabletop
(A).
Slide rod (C) onto the table leg (B) as shown in the image. Next,
insert the other table leg (B) into rod (C) and the preinstalled rods on
the tabletop. We’re off to a great start.
step 1:
step 2:
DE
A
7
GS GS
RS
RS B
B
B
A
C

Using bolts (G) and allen key (H), secure them in place.
step 4:
8
H
G
Check out the holes on rod (C) and the preinstalled rods as highlighted in
the image. That’s where you’ll be inserting bolts (G).
step 3:

Refer to the highlighted areas to see where you’ll be inserting bolts
(F) next.
Placing lock washer (E) on top of washer (D), fasten bolt (F) on all
four holes using allen key (H).
step 5:
step 6:
Voila! Your table is now assembled and secure!
F
E
D
H