URBAN OUTFITTERS OPHELIA COFFEE TABLE User manual

OPHELIA COFFEE TABLE
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of
3
TOOLS REQUIRED BUT NOT INCLUDED: N/A
WARNINGS:
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area. You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
(A) Metal Frame Leg
X2
(E) Metal Ball
x6
(B) Metal Support Center Bar
x1
(F) Clear Glass Bumpers
X6
(C) Metal Squiggle frame
x1
(G) Bolt
[M5 x 10mm] x10
(D) Glass x 1
(H) Hex Key
x1

OPHELIA COFFEE TABLE
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 2 of
3
STEP 1 Assemble Metal ball (E) on Frame leg (A)
STEP 2
Lay down all the parts on the clean carpet or cardboard for assembly. Align Metal Squiggle Frame (C) & Metal
Frame Legs (A) & support center bar (B). Insert screws (H) and partially tighten with Hex Key (H). Once all screws
are inserted and partially tightened, tighten all screws completely.

OPHELIA COFFEE TABLE
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 3 of
3
STEP 3
Insert Clear Plastic bumpers (F) into the frame. Gently place the Glass (D) on the assembled Bistro table as shown.