Mi-Light MiBOXER RGBCCT Lighting User manual

Dim brightness /
Saturaon
2.4G RF wireless
transmission technology
Remote control
Control distance 30m
Support third party voice control
(2.4GHz gateway is needed)
DMX512 controllable
(DMX512 LED transmier is needed)
Smartphone app control
(2.4GHz gateway is needed)
16 Millions of
colors to choose
Color temperature
adjustable
Product adopt the widely used 2.4GHz wireless technology with the features of low power
consumpon, long signal transming and strong an-interference, etc. This product has
auto-transming and auto-synchronizing funcon. Widely used on the controlling of hotel
lighng and home lighng.
1. Features
Signal transming &
Modes synchronizaon
Subordinate New Brand

2. Linking Code / Unlinking Code Instrucons
Linking Code Instrucons
Link / Unlink
buon
Link / Unlink
buon
Switch off light, aer
10 seconds then
switch on again.
Short press " I " buon
3 mes within 3 seconds
when light on.
Lights blink 3 mes
slowly means linking
is done successfully.
Linking failed if light is not blinking slowly, Please follow above steps again.
(Note: Light that have linked can't link again)
1 2 3
Power Light
Unlinking Code Instrucons
Switch off light, aer
10 seconds then
switch on again.
Short press " I " buon
5 mes within 3 seconds
when light on.
Lights blink 10 mes
quickly means unlinking
is done successfully.
Unlinking failed if light is not blinking quickly, Please follow above steps again.
(Note: Light haven't linked that don't need to unlink)
1 2 3
Power
Power Light
LightLight
Power

3. The mode of “Do Not Disturb”
It can be acvated or turned off via remote control
Turn on “Do not disturb” (wide using in the area which have power failure frequently to save
energy)
Press “OFF” buon three mes within three seconds and press “ON” buon three mes,
Acvated successfully once led light flashes four mes quickly.
Aenon: Do not disturb mode is acvated
1. When the light is OFF status (For example: Use app or remote to turn off light)
The light is ON status once you turn off and turn on power one me.
2. When the light is ON status
The light is OFF status once you turn off power and turn on again. (User must turn off and turn
on power twice mes to acvate light or use APP / remote to acvate light)
Press “ON” buon three mes within three seconds and press “OFF” buon three mes, closed
successfully once led light flashes four mes slowly.
Aenon: The light will be always “ON” status if you turn on and turn off power once user closed
“Do not Disturb” mode.
Turn off “Do not disturb”
4. Signal transming
One light can transmit the signals from the remote control to another light within 30m, as long as
there is a light within 30m, the remote control distance can be limitless.
Distance 30m
Different lights can work synchronously when they are started at different mes, light by the same
remote, under same dynamic mode and within 30m distance.
5. Modes synchronizaon
Signal transming &
Modes synchronizaon
The same dynamic mode, the same speed can be synchronized.
Light Light

Dynamic mode table 1 (default)
Dynamic Mode Brightness / Saturaon / Speed
Mardi Gras
Automac color change
Sam
Gemstone
Twilight
American
Fat Tuesday
Party
Slow Color Splash
1
2
3
4
5
6
7
8
9
Adjustable
Number
Dynamic mode table 2 (need to switch manually)
White light gradual change
+Flash 3 mes
Adjustable
Dynamic Mode Brightness / Saturaon / SpeedNumber
Colors gradual change
White light Gradual change
5Jump to change randomly
6Red light gradual change
+Flash 3 mes
7Green light gradual change
+Flash 3 mes
8Blue light gradual change
+Flash 3 mes
9
1
2
3RGB gradual change
4Seven colors jump to change
6. Dynamic mode table selecon
Select dynamic mode table 1: While the light is in stac mode, short press “ S+ ” buon 5 mes
quickly unl blue light flashes 3 mes slowly.
Select dynamic mode table 2: While the light is in stac mode, short press “ S- ” buon 5 mes
quickly unl yellow light flashes 3 mes slowly.

8. DMX512 LED Transmier Link /Unlink
If the link or unlink failed, please follow the above steps again.
Switch off the light,
aer 10 seconds
switch on again
2 3 4
The light blink slowly 3 mes,
means the linking is done
successfully
The light blink quickly 10 mes,
means the unlinking is done
successfully
When the light is on, short
press " " 3 mes within 3
seconds
Link/Unlink buon
+
SET
-
SET
SET
When the light is on, short
press " " 5 mes within 3
seconds
SET
Switch off the light,
aer 10 seconds
switch on again
Link
Unlink
Compable with DMX512 LED Transmier (Purchase separately)
Choose the zone for the light by pressing “ + ” or “ - ” (e.g. “CH12” means zone 12)
1
Power Light
Power Light
7. DMX512 LED Transmier Connecon Diagram
DMX512
Control Panel
Connect
DMX512 Transmier
2.4GHz Wireless Signal
Zone
1Limitless
Limitless
16 Zone
8.8.8.8
+
SET
-
Light
Light

10. Aenon
Made in China
Compable with these remote controls (Purchased separately)
1. Please check whether the voltage of the power supply is in accordance with the light, and please
check the connecon of both the cathode and anode, otherwise the light will be broken.
2. Please don’t connect wires with power on. Please turn on again only when it is in right connecon
and no short circuit.
3. Non-professional user cannot dismantle the lighng fixtures directly.
4. Please do not use the light in the place with widely range metal area or strong electromagnec
wave nearby, otherwise, the remote distance will be seriously affected.
9. Scan QR code to watch video instrucon
Third party voice controlSmartphone app control
(WL-Box1 video)
B4 / B4-B / T4
B3 / B3-B / T3
FUT089
FUT089-B
FUT092
FUT092-B
FUT088 FUT096
FUT096-B
B8 B0 S2-B / S2-W
S2-G
WL-Box1 FUTD01
8.8.8.8
+
SET
-
FUT100